technical specifications Abarth Grande Punto 2007 Owner handbook (in English)

184
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
ENGINE CODES -
BODYWORK
VERSIONS
VERSION1.4 T-JET
Engine code 199A8000
Cycle Otto
Number and layout of cylinders 4 in line
Piston bore and stroke mm 72 x 84
Total displacement cm31368
Compression ratio 9.8 ± 0.2
Maximum power (EEC) kW 114
HP 155
(❏)corresponding ratio rpm 5500
Maximum torque (EEC) Nm 201/230 (*)
kgm 20
corresponding ratio rpm 5000/3000 (*)
Spark plugs NGK IKR9F8
Fuel Unleaded petrol 95 RON
(Specification EN228)
(*) With OVER-BOOST
(❏) The maximum power with 155 HP is gotten using unloaded petrol 98 RON
Versions 1.4 T-JET
Engine code199A8000
Body version199AXN1B28
ENGINE

185
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
Modifications or repairs to the fuel feed system that are not carried out properly or do not take the system’s
technical specifications into account can cause malfunctions leading to the risk of fire.
WARNING
FUEL FEED/IGNITION
1.4 T-JET
Fuel feed Multipoint electronic injection
TRANSMISSION
1.4 T-JET
Gearbox Six forward gears and reverse with synchromesh for forward gear engagement
Clutch Self-adjusting pedal without idle stroke
Drive Front

186
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
SUSPENSIONS
1.4 T-JET
Front
Rear
BRAKES
1.4 T-JET
Service brakes
– front disc
– rear disc
Parking brake controlled by hand lever, it works on rear brakes
IMPORTANT Water, ice and antifreeze salt on roads may deposit on the brake discs thus reducing braking efficiency at first brak-
ing.
Mc Pherson independent wheels
twisting axle with interconnected wheels
STEERING
1.4 T-JET
Type rack and pinion with electric power steering
Minimum steering
cycle m 11

187
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
UNDERSTANDING TYRE
MARKING fig. 4
Example: 205/45 R17 88V
205 = Nominal width (S, distance be-
tween sidewalls in mm).
45 = Percentage height/width ratio
(H/S).
R = Radial tyre.
17 = Rim diameter in inches (Ø).
88 = Load rating (capacity).
V = Maximum speed rating.
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless tyres
with radial carcass. The homologated tyres
are listed in the Log book.
IMPORTANT In the event of discrepan-
cies between the information provided on
this “Owner handbook” and the “Log
book”, consider the specifications shown
in the log book only.
Attaining to the prescribed size, to ensure
safety of the car in movement, it must be
fitted with tyres of the same make and
type on all wheels.
IMPORTANT Do not use inner tubes
with Tubeless tyres.SPARE WHEEL
Pressed steel rim. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in: –1 ± 1 mm
Rear wheel toe-in: 1.7 ± 2 mm
The values refer to the car in running or-
der.
fig. 4F0M0169m

UNDERSTANDING RIM
MARKING fig. 4
Example: 7J x 17” ET39
7 = rim width in inches 1.
J = rim drop centre outline (side
projection where the tyre bead
rests) 2.
17 = rim nominal diameter in inches
(corresponds to diameter of the
tyre to be mounted) 3= Ø.
ET39 = wheel camber angle (distance be-
tween the disc/rim supporting
plane and the wheel rim centre
line). Load rating (capacity)
70= 335 kg 81= 462 kg
71= 345 kg 82= 475 kg
72= 355 kg 83= 487 kg
73= 365 kg 84= 500 kg
74= 375 kg 85= 515 kg
75= 387 kg 86= 530 kg
76= 400 kg 87= 545 kg
77= 412 kg 88= 560 kg
78= 425 kg 89= 580 kg
79= 437 kg 90= 600 kg
80= 450 kg 91= 615 kg
188
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
Maximum speed rating
Q = up to 160 km/h.
R = up to 170 km/h.
S = up to 180 km/h.
T = up to 190 km/h.
U = up to 200 km/h.
H = up to 210 km/h.
V = up to 240 km/h.
Maximum speed rating
for snow tyres
QM + S= up to 160 km/h.
TM + S= up to 190 km/h.
HM + S= up to 210 km/h.

189
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
Version Rims (**) Tyres
1.4 T-JET6.5J x 17 ET36 205/45 R17 88V
7J x 17 ET39 215/45 R17 91Y (*)
(*) Unchainable tyres
(**) Spacing of studs 100 mm and studs M12 x 1.5 use only wheels specified for this car.
COLD TYRE INFLATION PRESSURE (bar)
Tyres Medium load Full load
Front Rear Front Rear
215/45 R17 91Y 2.3 2.1 2.2 2.2
205/45 R17 88V 2.3 2.1 2.2 2.2
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
When running at speed higher than 160 km/h, inflate tyres at full load inflation values.
With T.P.M.S. system, pressure value shall be + 0.1 bar than prescribed value.

DIMENSIONS
Dimensions are expressed in mm and re-
fer to the vehicle fitted with standard
tyres.
The height refers to the vehicle unladen.
Boot volume
Unladen boot volume
(V.D.A. standards) ...................... 275 dm
3
Boot volume with rear
seat folded .................................... 638 dm3
Version A B C D E F G H
1.4 - T-JET4041 878 2510 653 1490 1476 1721 1465
IMPORTANT Track measurements may vary according to rim/tyre size.
190
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
F0M048Abfig. 5

191
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
PERFORMANCE
Top admitted speed after initial car use in km/h.
1.4 T-JET
208
Weights (kg)1.4 T-JET
Empty weight (including all fluids, fuel tank at 90% and with no optional): 1185
Payload (*) including the driver: 480
Maximum admitted loads (**)
– front axle:950
– rear axle:850
– total: 1665
Towable loads
– trailer with brakes:500
– trailer without brakes: 400
Maximum load on roof: 75
Maximum load on tow hitch (trailer with brakes): 60
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload.
(**) Loads not be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they comply with these
limits.
WEIGHTS

192
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
1.4 T-JET
45
5 ÷ 7
6
2.4
2.6
2
0.5
2.2
CAPACITIES
Fuel tank: litresincluding a reserve of: litres
Engine cooling system: litres
Engine sump: litresEngine sump and filter: litres
Gearbox/differential casing litres
Hydraulic brake circuit: kg
Windscreen, rear window
andheadlight washer litres
(❑) For particularly hard climate conditions, we recommend use of a 60% Paraflu UP and 40% demineralized water mixture.
Specified fuels and
original lubricants
Unleaded petrol with no less than 95 R.O.N.
(EN 228 Specification)
Mixture of 50% water and
PARAFLU UP
(❑)
SELENIA ABARTH 10W50
TUTELA CAR MATRYX
TUTELA TOP 4
Mixture of water and
TUTELA PROFESSIONAL SC 35

193
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use Fluid and lubricant specifications Original fluids Change
for correct car operation and lubricants
Oils for
petrol engines
If using non original SAE 5W-40 products, oils with minimum ACEA C3; in this event top engine performance is not guaranteed.
Use of products with low-quality properties than ACEA C3 could cause damages to the engine that are not covered by the war-
ranty.
For very cold climate conditions, ask Abarth Dealership for the appropriate Seleniaproduct to use.According to
Service Schedule Synthetic totally oils, grade SAE 10W50 SELENIA ABARTH
10W50
Contractual Technical
Reference N° 0101