coolant ACURA CSX 2006 Service Repair Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2006, Model line: CSX, Model: ACURA CSX 2006Pages: 2893, PDF Size: 67.66 MB
Page 9 of 2893
Î Î
Doorjamb Area
1-8 General Information
Danger/Warning/Caution Label Locations (cont’d)
RADIATOR CAP
DANGER
BATTERY
DANGER
SRS WARNING
AIR CONDITIONING
INFORMATION
SERVICE INFORMATION
andENGINECOOLANT
INFORMATION
RADIATOR CAP
DANGER BATTERY
DANGER
SRS WARNING
AIR CONDITIONING
INFORMATION
SERVICE INFORMATION
andENGINECOOLANT
INFORMATION
TIRE INFORMATION
Located on driver’s doorjamb
08/08/21 14:06:01 61SNR030_010_0008
ProCarManuals.com
DYNOMITE -2009-
Page 10 of 2893
Î
Î
Î
(#' )
µ
µµ
µ
µ
¶
¶
¶
¶
Emission Group Identification Test Group and Evaporative Family
K20Z2 engine Model:
Example:
’06 Model
’07 Model
’08 Model
’09 Model Test Group:
a. Model Year
b. Manufacturer Subcode c. Family Type
d. Displacement Group e. Sequence Characters
Evaporative Family:
a. Model Year
b. Manufacturer Subcode c. Family Type
d. Canister Working Capacity Group e. Sequence Characters
1-9
Under-hood Emission Control Label
TO EVAP
CA N IS TE R
EVAP CANISTER
PURGE V ALVE
VERS
RE SE R VO I R
EVAP
VA LVE DE PURGE
D U PR ES E RV O I R EV A P
PC V V A L V E
SOUPAPE RGC
FRONT
AV ANT
THIS V EHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2006 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA APPLICA BLE
TO 2 006 MODEL Y EAR NEW LEV IILEV PASS ENGER C ARS .
TWC, A/F SENSOR, HO2S, EGR, SFI
CE VEH ICU LE EST CONFORME A UX LOIS EPA TIER 2 DES ETA TS-UNIS
APPLICA BLES POUR LES VEHICULES DE BIN 5 POUR LES NOUV ELLES VEHICULES
VO ITURES D E TOURISME D’ A NNEE MO DELE 2006 ET A UX LOIS DE LA CA LIFORNIE
APPLICA BLES POUR LES NOUV EA UX VEHICU LES LEVII LEV VOITURES DE TOURISME
D’ ANN EE MOD ELE 2006. TWC, A/F SENSOR, HO2S, EGR, SFI
VALVE LASH
(COL D)
NO OTHER ADJUSTMENTS NEEDED. IN
EX
: 0.23 0.02 mm
: 0.30 0.02 mm
J EU D ES SOUP APES (MOUTEUR FROID)
AUCUN AUTRE REGLACE NECESSAIRE. ADM
ECM
: 0.23 0.02 mm
: 0.30 0.02 mm
VEHICLE EMISSION CONTROL INFORMATION
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
INFORMATION
HOND A MOTOR CO. , LTD.
HOND A MOTOR CO. , LTD.
RR A-C 00
MORMES S UR LES EMIS SIONS D’ECHAPPEMENT : LEVII, LEV (ACCREDITATION ET EN SERVICE)
: TIER 2-BIN 5 (ACCREDITATION ET EN SERVICE)
EPA ARBZN
6 6
THE FACTO RY INSTALLED LONG LIFE COOLANT MUST BE REPLA CED ACCORDING TO
MAINTENA NCE MINDER SUB COD E 5, OR AT 1 0 YEA RS WHICHEVER COMES FIEST.
THEREAFTER EVERY 5 YEARS.
WHEN ADD IN G OR REPL ACING TH E COOLA NT, A LWAYS USE ACURA RECOMMENDED
GENUINE L ONG-L IF E ANTI FREEZE / COOL ANT TYPE 2. THIS COOLA NT IS PRE MIX ED WITH
50% DISTILLED WA TER. IT D OES NOT REQUIRE A NY ADDITIONA L MIXING.
NEV ER DILUTE THE COO LANT, OR TH E LIFE OF THE ENGINE MAY BE SERIOUSL Y SHORTENED.
CH EC K O R A DD T HE C O O LAN T A T TH E RE SE RV E TAN K, N O T T HE R ADI AT O R.
FOR F URTHER INFORMATION ON THE COOLING SYSTEM, READ THE OWNER’S MA NUAL OR
CHECK WITH YOUR ACURA DEALER.
LORS D E L’APPOINT OU DE REMPLACEMENT DU LIQUID E DE REFROID ISSEMENT.
TOUJOURS UTILISER L’ANTIGEL /L IQUIDE D E REFRO IDISSEMENT TYPE 2 LONGUE D UREE
ACURA D’ORIGINE RECOMMENDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE A U
PREALABLE AV EC 50 % D’EA U DISTILLEE. IL N’EX IGE A UCUN MEL ANGE ADD ITIONNEL .
NE JAMA IS D IL UER LE L IQUIDE D E REFROIDISSEMENT, LA DUREE D E VIE DU MOTEUR
POURRAIT EN ETRE A FFECTEE. LE LIQUIDE D E REFROIDISSEMENT L ONGUE DUREE INSTAL LE A L ’USINE DOIT ETRE
RENLA CE CONFORMEMENT AU CODE SECONDAIRE 5 DE L ’A ID E-MEMOIRE D’ENTRETIEN
OU A PRES 10 ANS, SELON LA PREMIERE EVENTUA LITE.PU IS TOUS LES 5 ANS.
CONTROLER L ES NIV EAUX ET FA IRE L’APPOIN T A U V ASE D ’EXPAN SIO N. J AMA IS AU RAD IATEUR.
POUR TOUTE INFORMATION COMPLEMENTAIRE SUR LE CIRCUIT DE REFROIDISSEMENT, SE
REFERER A U MANUEL D’UTILISATEUR OU PRENDRE CONTACT AVEC UN CONCESSIONNAIRE ACURA.
6HNXV02. 4FKC6HNXR0106BBA
2.0L
6HNXV0 2. 4F A6 6HN XR 010 6BBA
ACCREDITATION OBD II 2.0LOBD II CERTIFIED
EXHAUST EMISSIONS STANDARDS : L EVII, LEV (CERTIFICATION AND IN-USE)
: TIER 2-BIN 5 (CERTIFICATION AND IN-USE)
EPA
ARB
T HIS SPARK IGNIT ION SYSTEM
CO M PLIES W ITH CANADIAN ICES 0 02 .
CE SYSTEME D’ALLUMAGE PAR
ALANORMENMB 002DUCANADA.ETINCELLE DE VEHICULE ES T CONFORMERENSEIGNEMENTS
108
’06-07 Models
’08-09 Models
TH E FA CTORY INSTA LLED LONG -LIFE COO LA NT MUST BE REPLACED A CCORDING TO
MAINTENA NCE MINDER SUB CODE 5, OR A T 10 YEARS WHICHEVER COMES FIEST.
TH ER EA FT ER E VE RY 5 YE AR S .
W HEN A DDIN G O R REPLACING TH E CO OLANT, A LWA YS USE H onda RECOMMENDED
G ENUIN E LON G-LIFE AN TI-FREEZE / COO LA NT TYPE 2. THIS COO LA NT IS PRE-MIX ED WITH
50% D ISTILLED WATER. IT DO ES N OT REQUIRE ANY AD DITION AL MIX ING.
NEV ER D ILU TE TH E CO OLANT, OR THE LIFE OF THE EN GINE MAY BE SERIOUSLY SH ORTENED .
C HE CK OR AD D TH E COO LA NT AT T HE R ES ER V E TAN K, NOT T HE R ADIA TO R.
FOR FURTH ER INFORMATION ON TH E COO LING SYSTEM, READ TH E OWNER’S MANUA L OR
CHECK WITH YOUR H onda D EA LER.
LORS DE L’APPOIN T OU DU REMPLACEMENT D U LIQUID E DE REFRO IDISSEMENT.
TOUJOURS UTILISER L’AN TIGEL /LIQU IDE DE REFROIDISSEMEN T TYPE 2 LON GUE DU REE
H onda D ’ORIG IN E RECO MMAND E CE LIQUID E DE REFRO IDISSEMENT EST MELANGE A U
PREALABLE AVEC 50 % D’EA U DISTILLEE. IL N’EX IGE AU CUN MELA NGE A DDITIONNEL.
NE JAMA IS DILUER LE LIQU ID E DE REFROIDISSEMEN T, LA D UREE DE V IE DU MOTEUR
P OUR RA IT EN ET RE A FFE CT EE . LE LIQUID E DE REFROIDISSEMEN T LON GUE DU REE INSTALLE A L’U SINE D OIT ETRE
RENLACE CO NFORMEMEN T AU CO DE SECOND AIRE 5 DE L’AID E-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, SELON LA PREMIERE EVENTU ALITE.PUIS TOUS LES 5 ANS.
CONTROLER LES NIVEA UX ET FAIRE L’APPOINT AU VASE D ’EXPANSION. JAMA IS AU RAD IA TEUR.
POUR TOUTE INFORMATION COMPLEMENTAIRE SUR LE CIRCUIT DE REFROID ISSEMENT, SE
REFERER AU MANU EL D’UTILISA TEUR OU PREND RE CONTA CT AVEC UN CONCESSIONNAIRE Honda.INFORMATION
RENSEIGNEMENTS VEHICLE EMISSION CONTROL INFORMATION
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
RRA-C02
U. S. EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I FUEL : GASOLINE
ARB : LEV I I LEV PC FUEL : GASOLINE
TWC, A/F SENSOR, HO2S, EGR, SFI
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORMS TO REGULATIONS :
2008MY
LOIS EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I CARBURANT : ESSENCE
ARB : LEV I I LEV PC CARBURANT : ESSENCE
TWC, A/F SENSOR, HO2S, EGR, SFI
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORME AUX NORMES : D’ ANNEE MODELE 2008
T HIS SPA RK IGNITI ON SY ST EM COMP LIES W ITH CA NADIAN ICE S-00 2.
CE SYSTEME D’ A LLUMAGE PAR ETINCELLE DE VEH ICULE EST CONFORME A LA NORME NMB-002 DU CANAD A.
HNX
902.0 V VA9
HNX
90106 RVEA
ab c d e
ab c d e
THIS VEHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2006 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA
REGULATIONS APPLICABLE TO 2006 MODEL YEAR
NEW LEV II LEV PASSENGER CARS.
THIS VEHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW LEV II LEV PASSENGER CARS.
CONFORMS TO REGULATIONS: 2008 MY
CONFORMS TO REGULATIONS: 2009 MY 6: ’06
7: ’07
8: ’08
9: ’09
HNX: HONDA
V: LDV
FKC: ’06 model, ’08 model
HKC: ’07 model
VA9: ’09 model
6: ’06
7: ’07
8: ’08
9: ’09
HNX: HONDA
R: EVAP/ORVR
BBA: ’06 model
BBY: ’07 model, ’08 model
VEA: ’09 model
08/08/21 14:06:02 61SNR030_010_0009
ProCarManuals.com
DYNOMITE -2009-
Page 11 of 2893
Î
Î
Î
(#' )
¶
¶ ¶
¶
Emission Group Identification Test Group and Evaporative Family
K20Z3 engine Model:
Example:
’07 Model
’08 Model
’09 Model Test Group:
a. Model Year
b. Manufacturer Subcode c. Family Type
d. Displacement Group e. Sequence Characters
Evaporative Family:
a. Model Year
b. Manufacturer Subcode c. Family Type
d. Canister Working Capacity Group e. Sequence Characters
1-10 General Information
Under-hood Emission Control Label (cont’d)
EVAP CANISTER
PURGE VALVE TO EVAP
CANIST ER
PCV VALVE FRONT
SOUPAPE RGC AVANT VERS
RE SE RVOIR
EVAP
VALVE DE PURGE
DU RES ERVOIR EVAPVEHICLE EMISSION CONTROL INFORMATION
HONDA MOTOR CO. , LTD.
RRB-C103
2
6 5
THIS VEHICLE CO NFORMS TO U.S. EPA TIER 2 BIN 5
REG ULATI ONS APPLICABLE TO 2007 MODEL YEAR
N EW PASSEN GER CARS AND CALIFORNIA REGULATIONS APPL ICABLE
TO 2007 MODEL YEAR NEW LEVII LEV PASSENG ER CARS.
CE VEHICUL E EST CONF ORME AUX L OIS EPA TIER 2 DES ETATS-UNIS
APPLICABLES POUR LES VEHICULES DE BIN 5 POUR LES NOUVEAUX VEHICULES
VOITURES DE TOURISME D’ ANNEE MODELE 2007 ET AUX LOIS DE LA CALIFORNIE
APPLICABL ES POUR LES NOUVEAUX VEHICUL ES LEVII LEV VOITURES DE TOURISME
D ’ AN NEE MOD ELE 2 007 .THE FACTORY INSTALLED LONG-LIFE COOLANT MUS T BE REPLACED ACCORDING TO
MAINTENANCE MINDER SUB CODE 5, OR AT 1 0 YEARS WHICHEVER COMES FIEST.
THEREAF TER EVERY 5 YEARS.
WHEN ADDING OR REPLACING THE COOLANT, ALWAYS USE ACURA RECOMMENDED
GENUINE L ONG-LIFE ANTI-F REEZE / COOL ANT TYPE 2. THIS COOL ANT IS PRE-MIXED WITH
50% DISTILLED WATER. IT DOES NOT REQUIRE ANY ADDITIONAL MIXING.
NEVER DILUTE THE COOLANT, OR THE LIFE OF THE ENGINE MAY BE SERIOUSLY SHORTENED.
CHECK OR ADD THE COOL ANT AT THE RESERVE TANK, NOT THE RADIATOR.
FOR FURTHER INFORMATION ON THE COOLING SYSTEM, READ THE OWNER’S MANUAL OR
CH ECK W ITH YOU R AC URA DEA LER.
LORS DE L’APPOINT OU DU REMPLACEMENT DU LIQUIDE DE REFROIDISSEMENT.
TOUJOURS UTILISER L’ANTIGEL /LIQUIDE DE REFROIDISSEMENT TYPE 2 LONGUE DUREE
ACURA D’ORIGINE RECOMMANDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE AU
PREAL ABL E AVEC 5 0 % D’EAU DISTIL LEE. IL N’EXIGE AUCUN MEL ANGE ADDITIONNEL .
NE JAMAIS DILUER LE LIQUIDE DE REFROIDISSEMENT, LA DUREE DE VIE DU MOTEUR
POURRAIT EN ETRE AFFECTEE. LE LIQUIDE DE REFROIDISSEMENT LONGUE DUREE INSTALLE A L’USINE DOIT ETRE
RENLACE CONFORMEMENT AU CODE SECONDAIRE 5 DE L’AIDE-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, S EL ON L A PREMIERE EVENTUALITE.PUIS TOUS LES 5 ANS.
CONTROLER LES NIVEAUX ET FAIRE L’APPOINT AU VASE D’EXPANSION. JAMAIS AU RADIATEUR.
PO UR TOUTE INF ORMATI ON CO MPLEMEN TAI RE SU R L E CI RCU IT DE REFRO IDI SSEMEN T, SE
REFERER AU MANUEL D’UTILISATEUR OU PRENDRE CONTACT AVEC UN CONCESSIONNAIRE ACURA.
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
TWC, A/F SE NSOR, HO2S, SF I 7HNXV02. 4HKC
7HNXR0106BBY
OBD II CERTIFIED 2.0L
7HNXV02. 4HKC
7HNXR0106BBY
ACCREDITATION OBD II 2.0L
TWC , A/F SENSOR, HO2 S, S F I
THIS SPA RK IG NITION SYSTEM
CO MPL IES WITH CA NA DIA N ICES-0 0 2.CE SYSTE ME D’A LLUMAGE PAR
ETI NCE LLE DE VEHI CULE EST CONFORM E
ALANORMENMB-002 DUCANADA.
VALVE LASH
(COLD) NO O TH ER A D J USTME NTS NEED ED . IN
EX
: 0 .2 3 0.0 2 mm
: 0 .2 7 0.0 2 mm
JEU DES SOU PA PES
(M OTE UR FRO ID ) AUCU N AUTRE REGLACE NECESSAIRE. ADM
ECH
: 0 .23 0 .0 2 m m
: 0.2 7 0 .0 2 m m NORMESSURLESEMISSIONS D’ECHAPPEMENT
: LEVI I, LEV (ACCREDITATIO N ET EN SERVICE)
: TI ER 2 BIN 5 (ACCREDITATION E T E N SERVI CE )
EPA ARBEX HA UST EMISS IONS S TA NDA RD S
: LEVII, LEV (C ERTIFIC ATION AND IN-USE)
: TIER 2 BIN 5 (CER TIFICA TION AND IN- USE)
EP A
ARB
INFORMATION
RENSEIGNEMENTS
108
’07 Model
’08-09 Models
THE FACTORY INSTALLED LONG-LIFE COOLANT MUST BE REPLACED ACCORDING TO
MAINTENANCE MINDER SUB CODE 5, OR AT 10 YEARS W HICHEVER COM ES FIEST.
THEREAFTER EVE RY 5 YEARS.
WHEN ADDING OR REPLACING THE COOLANT, ALWAYS USE ACURA RECOMMENDED
GEN UIN E LONG -LIFE A NTI-FREEZE / CO OLA NT TYPE 2. TH IS COO LAN T IS PRE-MIXED WITH
50% DISTILLED WATER. IT DOES NOT REQUIRE ANY ADDITIONAL MIXING.
NEVER D ILUTE TH E COO LA NT, OR THE LIFE O F TH E EN GINE MAY BE SERIOU SLY SH ORTEN ED .
CHECK OR ADD THE COOLANT AT THE RESERVE TANK, NOT THE RADIATOR.
FOR FURTH ER INFORMA TION ON TH E COOLING SYSTEM, READ THE OWN ER’S MAN UA L OR
CHECK WITH YOUR A CURA DEA LER.
LORS DE L’APPOINT OU DU REMPLACEMENT DU LIQUIDE DE REFROIDISSEMENT.
TOUJO URS UTILISER L’AN TIGEL /LIQUID E D E REFROID ISSEMENT TYPE 2 LON GUE D UREE
ACURA D’ORIGINE RECOMMANDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE AU
PREA LABLE AV EC 50 % D ’EA U D ISTILLEE. IL N’EX IGE AU CUN MELA NGE A DD ITION NEL.
NE JA MA IS D ILU ER LE LIQUID E D E REFROIDISSEMENT, LA D UREE D E VIE DU MOTEU R
POURRAIT EN ETRE AFFECTEE.
LE LIQUIDE D E REFROIDISSEMENT LON GUE D UREE INSTA LLE A L’U SINE D OIT ETRE
RENLACE CONFORMEMENT AU CODE SECONDAIRE 5 DE L’AIDE-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, SELON LA PREMIERE EVENTUALITE.PUIS TOUS LES 5 ANS.
C ON TR OLER LES N IVEAU X ET FAIR E L’A PPOIN T AU VA SE D’EXPANS IO N. JAMAIS A U R ADIATEUR .
PO UR TOUTE INFO RMATION CO MPLEMENTA IRE SUR LE CIRCUIT D E REFROID ISSEMENT, SE
REFERER AU MA NUEL D ’UTILISATEUR OU PRENDRE CON TA CT AV EC UN CONCESSIONN AIRE A CURA .INFORMATION
RENSEIGNEMENTS VEHICLE EMISSION CONTROL INFORMATION
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
HONDA MOTOR CO. , LTD.RRB-C11108
U. S. EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I FUEL : GASOLINE
ARB : LEV I I LEV PC FUEL : GASOLINE
TW C, A/F SENSOR, HO2S, SFI
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORMS TO REGULATIONS : 2008MY
LOIS EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I CARBURANT : ESSENCE
ARB : LEV I I LEV PC CARBURANT : ESSENCE
TW C, A/F SENSOR, HO2S, SFI
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORME AUX NORMES : D’ ANNEE MODELE 2008
THIS S PAR K IGNI TION S YS TEM COM PLIE S W ITH CA NADIAN ICES -00 2.
CE SY STEME D’ A LLUMAGE PAR ETINCELLE DE VEHIC ULE EST C ONFORME A LA NORME NMB-002 DU C ANADA .
HNX
902.0 V VA9
HNX
90106 RVEA
ab c d e
ab c d e
THIS VEHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW LEV II LEV PASSENGER CARS.
CONFORMS TO REGULATIONS: 2008 MY
CONFORMS TO REGULATIONS: 2009 MY 7: ’07
8: ’08
9: ’09
HNX: HONDA
V: LDV
HKC: ’07 model
FKC: ’08 model
VA9: ’09 model
7: ’07
8: ’08
9: ’09
HNX: HONDA
R: EVAP/ORVR
BBY: ’07 model, ’08 model
VEA: ’09 model
08/08/21 14:06:04 61SNR030_010_0010
ProCarManuals.com
DYNOMITE -2009-
Page 21 of 2893
µµ µ
µµ
Cooling System
ItemMeasurement Qualification Standard or New
2-6Standards and Service Limits
Radiator
Coolant capacities (including engine,
heater, hoses, and reservoir)
Use Honda Long Life Antifreeze/
Coolant Type 2
(K20Z2) M/T: engine
overhaul
6.6 L (1.74 US gal)
M/T: coolant
change 4.3 L (1.14 US gal)
A/T: engine
overhaul 6.5 L (1.72 US gal)
A/T: coolant
change 4.2 L (1.11 US gal)
Coolant capacities (includes engine,
heater, hoses, and reservoir)
Use Honda Long Life Antifreeze/
Coolant Type 2
(K20Z3) Engine overhaul 6.8 L (1.80 US gal)
Coolant change 4.5 L (1.19 US gal)
Coolant reservoir Coolant capacity 0.4 L (0.11 US gal)
Radiator cap Opening pressure 93 123 kPa (0.95 1.25 kgf/cm , 14 18 psi)
Thermostat Opening temperature Begins to open 76 80 °C (169 176 °F)
Fully open 90 °C (194 °F)
Valve lift at fully open 8.0 mm (0.31 in.)
2
08/08/21 14:07:14 61SNR030_020_0006
ProCarManuals.com
DYNOMITE -2009-
Page 41 of 2893
(#' )
Application Lubricant or Fluid
3-2Lubricants and Fluids
API CERTIFICATION SEAL
For details of the lubrication points and the type of lubricants to be applied, refer to the illustrated index and the various work procedures (such
as Assembly/Reassembly, Replacement, Overhaul, Installation, etc.) contained in each section.
A Engine Acura Motor Oil:
K20Z2: P/N CA66808 (5W-20)
K20Z3: P/N CA66807 (5W-30)
Look for the API certification seal on the oil container. Make sure it says ‘‘For
Gasoline Engines.’’ SAE viscosity: See chart.
B Manual transmission Acura Manual Transmission Fluid (MTF): P/N 08798-9033C Always use Acura MTF. Using motor oil can cause stiffer shifting because it
does not contain the proper additives.
Automatic transmission Acura Automatic Transmission Fluid (ATF-Z1): P/N CA66704 Always use Acura ATF-Z1. Using a non-Acura ATF can affect shift quality.
C
D Brake system (including VSA lines)
Clutch system (manual transmission) Honda DOT 3 Brake Fluid: P/N 08798-9008
Always use Honda DOT 3 Brake Fluid. Using a non-Honda brake fluid can
cause corrosion and decrease the life of the system.
E F
G H I
J
K Brake booster clevis pin
Clutch master cylinder clevis pin (manual
transmission)
Release fork (manual transmission)
Battery terminals
Fuel fill door
Trunk hinges
Hood hinges and hood latch Multipurpose Grease
L
M Shift cable ends (manual transmission)
Caliper piston seal and boot, caliper pins and boots Honda Silicone Grease: P/N 08C30-B0234M
N Air conditioning compressor Compressor Oil: SP-10 (P/N 38897-P13-A01AH) for refrigerant HFC-134a (R-134a)
O Cooling system Honda Long Life Antifreeze/Coolant Type 2: P/N CA66688
08/08/21 14:08:29 61SNR030_030_0002
ProCarManuals.com
DYNOMITE -2009-
Page 46 of 2893
(#' ) Symbol Maintenance Main Items
3-7
Maintenance Main Items
If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every
year.
NOTE:
Replace the brake fluid every 3 years independent of the maintenance messages in the information display.
Inspect idle speed every 160,000 miles (256,000 km).
Adjust the valves during services A, B, 1, 2 or 3, only if they are noisy.
A Replace engine oil (see page 8-10).
Engine oil capacity without oil filter:
K20Z2: 4.0 L (4.2 US qt)
K20Z3: 4.2 L (4.4 US qt)
B Replace engine oil and oil filter (see page 8-11). Engine oil capacity with oil filter:
K20Z2: 4.2 L (4.4 US qt)
K20Z3: 4.4 L (4.6 US qt)
Check front and rear brakes (see page 19-3). Check pad and disc for wear (thickness), damage, and cracks.
Check calipers for damage, leaks, and tightness of mounting bolts.
Check parking brake adjustment (see page 19-7). Check the number of clicks (8 to 10) when the parking brake lever is pulled with 196 N (20 kgf,
44 lbf) of force.
Inspect tie-rod ends, steering gearbox, and gearbox boots (see page 17-5). Check steering linkage.
Check boots for damage and leaking grease.
Check fluid lines for damage and leaks.
Inspect suspension components (see page 18-3). Check bolts for tightness.
Check condition of ball joint boots for deterioration and damage.
Inspect driveshaft boots (see page 16-4). Check boots for cracks and boot bands for tightness.
Inspect brake hoses and lines including VSA lines (see page 19-37). Check the master cylinder and VSA modulator-control unit for damage or leakage.
Inspect all fluid levels and condition of fluids. Engine coolant (see page 10-7)
Automatic transmission fluid (ATF-Z1) (see page 14-231)
Manual transmission fluid (MTF)
5M/T (see page 13-5), 6M/T (see page 13-82)
Clutch fluid (see page 12-7)
Brake fluid (see page 19-9)
Windshield washer fluid (see page 22-234)
Inspect exhaust system: K20Z2 (see page 9-13), K20Z3 (see page 9-14)
Check catalytic converter heat shields, exhaust pipes, and muffler for damage, leaks, and tightness.
Inspect fuel lines (see page 11-326) and connections (see page 11-328). Check for loose connections, cra cks, and deterioration; retighten loose connections and replace
damaged parts.
NOTE: According to state and federal regulations, failure to do the maintenance items marked with an asterisk ( ) will
not void the client’s emissions warranties. However, Acura recommends that all maintenance services be done at the
recommended interval, to ensure long-term reliability.
08/08/21 14:08:32 61SNR030_030_0007
ProCarManuals.com
DYNOMITE -2009-
Page 47 of 2893
µµ µµ
µµ µµ
(#' )
Number Maintenance Sub Items
3-8
Maintenance Minder
Maintenance Sub Items
1 Rotate tires, and check tire inflation and condition.
Follow the pattern shown in the Owner’s Manual.
2 Replace air cleaner element (see page 11-346).
Replace every 15,000 miles (24,000 km) if the vehicle is driven in dusty conditions.
Replace dust and pollen filter (see page 21-75). If the vehicle is driven mostly in urban areas that have high concentrations of dust, pollen, or soot in
the air, replace every 15,000 miles (24,000 km).
Replace the filter whenever airflow from the heating and air c onditioning system is less than normal.
Inspect drive belt (see page 4-30). Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator.
3 Replace automatic transmission fluid (see page 14-232). Capacity:2.9L(3.1USqt);useAcuraATF-Z1.
Replace manual transmission fluid. 5M/T (see page 13-5), 6M/T (see page 13-82)
Capacity:1.5L(1.6USqt);useAcuraMTF.
4 Replace spark plugs (see page 4-21).
K20Z2: Use SKJ20DR-M11 (DENSO).
K20Z3: Use SK22PR-M11S (DENSO).
Inspect valve clearance (cold). K20Z2 (see page 6-12)
Intake: 0.21 0.25 mm (0.008 0.010 in.), Exhaust: 0.28 0.32 mm (0.011 0.013 in.)
K20Z3 (see page 6-14)
Intake: 0.21 0.25 mm (0.008 0.010 in.), Exhaust: 0.25 0.29 mm (0.010 0.011 in.)
5 Replace engine coolant (see page 10-8).
Capacity (including the reservoir):
K20Z2: M/T 4.3 L (1.14 US gal), A/T 4.2 L (1.11 US gal)
K20Z3: 4.5 L (1.19 US gal)
Use Honda Long Life Antifreeze/Coolant Type 2.
08/08/21 14:08:32 61SNR030_030_0008
ProCarManuals.com
DYNOMITE -2009-
Page 104 of 2893
5-5
A
B
A
B
15. Disconnect the evaporative emission (EVAP)
canister hose (A) and the brake booster vacuum
hose (B).
16. Remove the quick-connect fitting cover (A), then disconnect the fuel feed hose (B) (see page 11-329).
17. M/T model: Remove the shift cables. Do not bend the cables excessively (see step 7 on page 13-8).
18. M/T model: Remove the clutch slave cylinder, and the clutch line bracket mounting bolt (see step 5 on
page 13-7). 19. M/T model: Remove the air cleaner bracket.
20. Remove the drive belt (see page 4-31).
21. Remove the idler pulley base (see step 2 on page
4-32).
22. Wait until the engine is cool, then carefully remove the radiator cap.
23. Raise the vehicle on the lift.
24. Remove the front wheels.
25. Remove the splash shield.
26. Loosen the drain plug in the radiator, and drain the engine coolant (see page 10-8).
(cont’d)
08/08/21 14:20:23 61SNR030_050_0005
ProCarManuals.com
DYNOMITE -2009-
Page 111 of 2893
5-12Engine Assembly
Engine Removal (cont’d)
64. Check that the engine/transmission is completely
free of vacuum hoses, fuel and coolant hoses, and
electrical wiring.
65. Slowly lower the engine/transmission about 150 mm (6 in.). Check once again that all hoses and
electrical wiring are disconnected and free from the
engine/transmission, then lower it all the way.
66. Disconnect the chain hoist from the engine/ transmission.
67. Raise the vehicle on the lift, then remove the engine/transmission from under the vehicle.
08/08/21 14:20:28 61SNR030_050_0012
ProCarManuals.com
DYNOMITE -2009-
Page 123 of 2893
(#'
)
M/T model
A/T model
5-245-24
Engine Assembly
Engine Installation (cont’d)
Side Engine Mount Replacement
67. Refill the transmission with fluid:
Manual transmission (see step 3 on page 13-5)
Automatic transmission (see step 3 on page14-232)
68. A/T model: Move the shift lever to each gear, and verify that the A/T gear position indicator follows
the transmission range switch.
69. M/T model: Check that the transmission shifts into gear smoothly.
70. Refill the radiator with engine coolant, and bleed the air from the cooling system with the heater
valve open (see step 6 on page 10-8).
71. Do the ECM/PCM reset procedure (see page 11-4).
72. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure (see page 11-4).
73. Inspect the idle speed (see page 11-309).
74. Inspect the ignition timing (see page 4-20).
75. Check the wheel alignment (see page 18-5). 1. Support the engine with a jack and wood block
under the oil pan.
2. Remove the upper torque rod.
Replace.
Replace.
Replace.
Replace.
08/08/21 14:21:01 61SNR030_050_0024
ProCarManuals.com
DYNOMITE -2009-