mirror ACURA CSX 2006 Service Repair Manual

µµ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
Item Measurement Qualification Specification
2-23
ELECTRICAL
RATINGS
Battery 12 V 47 Ah/20 HR (12 V 38 Ah/5 HR)
Fuses Under-hood
fuse/relay box
(’06-07 models)100 A, 80 A, 70 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-hood
fuse/relay box
(’08-09 models) 100 A, 70 A, 60 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-dash
fuse/relay box 30 A, 20 A, 15 A, 10 A, 7.5 A
Light bulbs Headlight high beam12 V 60 W (HB3)
Headlight low
beam 12 V 51 W (HB4)
Headlight low
beam (HID) 12 V 35 W (D2R)
Front turn signal
lights 12 V 24/2.2 CP (Amber)
Front side marker
lights 12 V 2 CP
Side turn signal
lights LED
Front parking lights 12 V 3 CP
Front fog lights
(TYPE S, PREMIUM
(’08 model), TECH
PKG) 12 V 55 W (H11)
Rear turn signal
lights 12 V 21 W (Amber)
Rear side marker
lights 12 V 3 CP
Brake/taillights 12 V 21/5 W
Taillights 12 V 5 W
High mount brake
light (except TYPE
S) 12 V 21 W
High mount brake
light (TYPE S) LED
Back-up lights 12 V 16 W
Licenseplatelights 12V 5W
Ceiling light 12 V 8 W
Trunk light 12 V 5 W
Front individual
map lights 12 V 8 W
Gauge lights LED
Indicator lights LED
Ambient light LED
Door courtesy
lights 12 V 3.4 W
Vanity mirror lights 12 V 2 W
Glove box light 12 V 3.4 W
Footwell lights
(TYPE S) LED
Washer reservoir Capacity 4.5 L (4.8 US qt)
08/08/21 14:07:26 61SNR030_020_0023
ProCarManuals.com
DYNOMITE -2009-

(#'
/)
Body
Doors
Mirrors
Glass
MoonroofInterior Trim
Consoles
Dashboard
.............................................. ..............................................
Special Tools . 20-2
............................................ ..
.... ...
................
...........................................
........................................... ...
..... ....
..................
...........................................
........................................... .......
.............................................
............................................. ............................................
..
.... ...
................
...........................................
........................................... ...
..... ....
..................
...........................................
........................................... .......
.............................................
.............................................
Component Location Index
- Front Door . 20-3
Component Location Index - Rear Door . 20-5
Front Door Panel Removal/Installation . 20-7
Front Door Outer Handle Replacement . 20-9
Front Door Latch Replacement . 20-12
Front Door Glass and Regulator Replacement . 20-14
Front Door Glass Outer Weatherstrip Replacement . 20-15
Front Door Weatherstrip Replacement . 20-16
Rear Door Panel Removal/Installation . 20-17
Rear Door Outer Handle Replacement . 20-19
Rear Door Latch Replacement . 20-21
Rear Door Glass and Regulator Replacement . 20-23
Rear Door Glass Outer Weatherstrip Replacement . 20-26
Rear Door Weatherstrip Replacement . 20-27
Front and Rear Door Glass Adjustment . 20-28
Front and Rear Door Position Adjustment . 20-29
Front and Rear Door Striker Adjustment . 20-31
......................
......................
.......................................
......................
......................
......................
.................
Component Location Index . 20-32
Power Mirror Replacement . 20-33
Mirror Holder Replacement . 20-34
Rearview Mirror Replacement . 20-35
......................
.......................... .............
...................... ......................
.......................... .............
......................
Component Location Index
. 20-36
Windshield Replacement . 20-38
Front Corner Glass Replacement . 20-43
Rear Window Replacement . 20-47
...................... ............
.......................
.................................... ....................
.....................
............................
................................... .......
......................... ..
......................
............
.......................
.................................... ....................
.....................
............................
................................... .......
......................... ..
Component Location Index
. 20-53
Symptom Troubleshooting Index . 20-54
Glass Position Adjustment . 20-55
Glass Replacement . 20-55
Wind Deflector Replacement . 20-56
Drain Channel Replacement . 20-57
Sunshade Replacement . 20-58
Motor Replacement . 20-59
Frame and Drain Tube Replacement . 20-60
Drain Channel Slider and Cable Assembly Replacement . 20-62
Closing Force and Opening Drag Check . 20-64 ......................
..
..
.................................... ..
.....
...........
................
.................................. ......................
..
..
.................................... ..
.....
...........
................
..................................
Component Location Index
. 20-65
Trim Removal/Installation - Door Areas . 20-66
Trim Removal/Installation - Pillar Areas . 20-69
Trim Removal/Installation - Rear Shelf Area . 20-78
Trim Removal/Installation - Trunk Area . 20-80
Trim Removal/Installation - Trunk Lid . 20-82
Grab Handle Removal/Installation . 20-82
Headliner Removal/Installation . 20-84
Carpet Replacement . 20-88
......
..................... ....
...................... ......
..................... ....
......................
Center Console Removal/Installation . 20-92
Center Console
Disassembly/Reassembly . 20-95
Center Console Armrest Replacement . 20-96
Armrest Lock Replacement . 20-96
..............................
.............................. ...
..............................
.............................. .........
.............................. ....................
...............
..............................
..............................
.............................. .....................
..............................
..............................
...
..............................
.............................. .........
.............................. ....................
...............
..............................
..............................
.............................. .....................
Instrument Panel
Removal/Installation . 20-98
Gauge Control Module (Speedo) Trim Removal/Installation . 20-99
Subdisplay Visor Removal/Installation . 20-100
Driver’s Dashboard Lower Cover Removal/Installation . 20-102
Driver’s Dashboard Undercover Removal/Installation . 20-103
Center Pocket Removal/Installation . 20-103
Passenger’s Dashboard Undercover Removal/Installation . 20-104
Glove Box Removal/Installation . 20-104
Dashboard Vent Removal/Installation . 20-105
Glove Box Striker Replacement . 20-107
Dashboard Side Trim Removal/Installation . 20-107
Side Defogger Vent Trim Removal/Installation . 20-108
Dashboard/Steering Hanger Beam Removal/Installation . 20-108
Dashboard/Steering Hanger Beam Disassembly/Reassembly . 20-114
08/08/21 14:58:49 61SNR030_200_0002
ProCarManuals.com
DYNOMITE -2009-

Î
(#'

)
20-3
Doors
Component Location Index - Front Door
DOOR GLASS OUTER
WEATHERSTRIP
DOOR ROOF OUTER TRIM
DOOR CENTER OUTER TRIM
DOORHINGEDOOR
CHECKER
HINGE
DOOR GLASS
INNER WEATHERSTRIP
SPEAKER
DOOR PANEL
POWER WINDOW
SWITCH
POWER WINDOW SWITCH Passenger’s side
POWER WINDOW
SWITCH PANEL ARMREST
DOOR WEATHERSTRIP
PLASTIC COVER
COURTESY LIGHTCOURTESY LIGHT
SUBHARNESS
POWER WINDOW
SWITCH PANEL
POWER MIRROR
SWITCH
(cont’d)
Replacement, page 20-15
Position Adjustment,page 20-29
Removal/Installation, page 20-7
Replacement, page 20-16
08/08/21 14:58:51 61SNR030_200_0005
ProCarManuals.com
DYNOMITE -2009-



Î

(#'



 )

Special Tools Required
20-7
Front Door Panel Removal/Installation
A
B
C
Fastener Locations :Screw,1 :Clip,1
AFa

stener Location
: Clip, 1
A
B
C
D
B
E
A
Fastener Location :Screw,1
KTC trim tool set SOJATP2014
NOTE: Use the appropriate tool from the KTC trim tool
s
et to avoid damage when removing components.
1. Raise the glass fully.
2. Pry out on the rear portion of the inner handle cap (A) with the appropriate trim tool, then release the
hooks (B, C).
3. Remove the screw and the clip securing the inner handle (A). 4

. Remove the power window switch panel (A).
–1 Pry up on the rear edge of the switch panel with the appropriate trim tool, then release the
rear clip.
–2 Pull out along the edge of the panel to release all of the hooks (B).
–3 Pull the switch panel rearward to release the front hook (C).
–4 Disconnect the power mirror switch connector (D) (driver’s) and the power window switch
connector (E).
5. Remove the screw. (cont’d)
08/08/21 14:58:57 61SNR030_200_0009
ProCarManuals.com
DYNOMITE -2009-



(#'


 )

20-1520-15
Front Door Glass Outer
Weatherstrip Replacement
A A B
B
A
A
7. Apply multipurpose grease to all the sliding surfaces of the regulator (A) where shown.
8. Install the glass and regulator in the reverse order of removal, and note these items:
 Roll the glass up and down to verify it moves freely without binding.
 Make sure that there is no clearance between the glass and glass run channel when the glass is
closed.
 Adjust the position of the glass as necessary (see page 20-28).
 When reinstalling the door panel, make sure the
plastic cover is installed properly and sealed
around its outside perimeter to seal out water.
 Check for water leaks (see step 9 on page 20-29).
 Make sure the power door locks, the windows and the power mirror operate properly.
 Test-drive and check for wind noise and rattles. NOTE:
 Put on gloves to protect your hands.
 Take care not to scratch the door.
1. Lower the glass fully.
2. Release the front hook (A) from inside of the door, then pull up the front door glass outer weatherstrip
(B).
3. Starting at the front, slowly pull up the front door glass outer glass weatherstrip (A).
(cont’d)
08/08/21 14:59:02 61SNR030_200_0017
ProCarManuals.com
DYNOMITE -2009-



(#'


 )

20-1520-15
Front Door Glass Outer
Weatherstrip Replacement
A A B
B
A
A
7. Apply multipurpose grease to all the sliding surfaces of the regulator (A) where shown.
8. Install the glass and regulator in the reverse order of removal, and note these items:
 Roll the glass up and down to verify it moves freely without binding.
 Make sure that there is no clearance between the glass and glass run channel when the glass is
closed.
 Adjust the position of the glass as necessary (see page 20-28).
 When reinstalling the door panel, make sure the
plastic cover is installed properly and sealed
around its outside perimeter to seal out water.
 Check for water leaks (see step 9 on page 20-29).
 Make sure the power door locks, the windows and the power mirror operate properly.
 Test-drive and check for wind noise and rattles. NOTE:
 Put on gloves to protect your hands.
 Take care not to scratch the door.
1. Lower the glass fully.
2. Release the front hook (A) from inside of the door, then pull up the front door glass outer weatherstrip
(B).
3. Starting at the front, slowly pull up the front door glass outer glass weatherstrip (A).
(cont’d)
08/08/21 14:59:02 61SNR030_200_0017
ProCarManuals.com
DYNOMITE -2009-

Î
Î(#')
20-32Mirrors
Component Location Index
MIRROR HOLDER
POWER MIRROR
REARVIEW MIRROR
Replacement, page 20-34
Replacement,
page 20-33
Replacement, page 20-35
08/08/21 15:00:03 61SNR030_200_0034
ProCarManuals.com
DYNOMITE -2009-



(#'
 )

20-33
Power Mirror Replacement
B
A
Fastener Locations :Nut,3
6x1.0mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)A A
B
C
1. Raise the door glass fully.
2. Remove these items:  Door panel (see page 20-7)
 Plastic cover, as needed (see step 4 on page 20-9)
3. Disconnect the connector (A), and detach the harness clip (B).
4. Remove the maintenance cap (A), and remove the nuts. 5. While holding the mirror (A), detach the clip (B),
then remove the mirror, and pull the harness (C)
out through the hole in the door. Take care not to
scratch the door.
6. Install the mirror in the reverse order of removal, and make sure the connector is plugged in properly.
08/08/21 15:00:04 61SNR030_200_0035
ProCarManuals.com
DYNOMITE -2009-



(#'
 )
20-34 Mirrors
Mirror Holder Replacement
A
B C
A
B
C
D E
C
E
F A
B
C B
A B
C
A
C
CB A
A
B
C
NO GOOD
OK
NOTE: Put on gloves to protect your hands.
1. Carefully push on the top edge of the mirror holder (A) by hand.
2. Put a shop towel in the opening between the lower edge of the mirror holder and the mirror housing
(B) to prevent scratches, and detach the bottom
clips (C) with a flat-tip screwdriver wrapped with
protective tape.
3. Carefully pull out the bottom edge of the mirror holder (A) to separate the adhesive (B), and then
release the side clips (C).
4. Separate the mirror holder from the actuator (D) by releasing the hooks (E). Disconnect the mirror
defogger connectors (F) from the heater pad
terminals. 5. Before reinstalling the mirror holder to the inner
holder (A) on the actuator, check the actuator rods
(B) and the actuator boots (C). Make sure the
actuator rods are securely mounted in the holes,
and that the boots properly cover each rod.
6. Reconnect the mirror defogger connectors.
7. Reattach the hooks of the mirror holder to the actuator, then position the mirror holder on the
actuator. Carefully push on the clip portions of the
mirror holder until the mirror holder locks into
place.
8. Check the actuator operation.
08/08/21 15:00:05 61SNR030_200_0036
ProCarManuals.com
DYNOMITE -2009-


(#'
 )
20-35
Rearview Mirror Replacement
A
A B
C
1. Turn the rearview mirror base (A) 90 °.
2. Slide the rearview mirror (A) down toward thebottom of the windshield to detach it from the
spring (B) in the mount (C).
3. Install the rearview mirror in the reverse order of removal.
08/08/21 15:00:05 61SNR030_200_0037
ProCarManuals.com
DYNOMITE -2009-