display Acura ILX 2013 Navigation Manual

147Audio
Playing an iPod®1.Unclip the USB connector in the front console and loosen the adapter cable.
2.Install the iPod® dock connector to the USB connector.■Connecting an iPod®
1Connecting an iPod®•Do not use an extension cable with the USB
adapter cable.•Do not connect your iPod® using a hub.•Do not use a device such as a card reader or
hard disk drive, as the device or your tracks
may be damaged.•We recommend backing up your data before
using the device in your vehicle.•Displayed messages may vary depending on
the device model and software version.
Your audio system may not work with all
software versions of these devices.
If the audio system does not recognize your
iPod®, try reconnecting it a few times or reboot
the device.
■Model Compatibility
Model
iPod (5th generation)
iPod classic 80/160G (launched in 2007)iPod classic 120GB (launched in 2008)
iPod classic 160GB (launched in 2009)iPod nano (1st to 6th generation*) *launched in 2010
iPod touch (1st to 4th generation*) *launched in 2010iPhone/iPhone 3G/iPhone 3GS

148
XX
Playing an iPod®
XSelecting iPod® Mode
Audio
Selecting iPod® Mode1.Connect the iPod® to the USB adapter cable in the console compartment.
2.Press the HDD/AUX button until you get to iPod® mode.
3.Select a track using the iPod® menu on the screen.X
The current track number and total number of tracks are displayed.
Audio Screen ControlHAUDIO button (in iPod® mode)
Control the audio screen through the navigation system.
Rotate i to select a track. Press u.
XMove e to select MUSIC SEARCH
to change songs in the track list. 2Searching for Music
P. 150
XMove r to select AUDIO MENU. 2Audio Menu
P. 149
1Playing an iPod®
d “Display audio screen”
You can control the iPod® using voice
commands.
2iPod® Commands P. 223
A visual guide helps you operate the audio
system.
2System Controls P. 4
2Basic Operation P. 6
Available operating functions vary on models or
versions. Some functions may not be available on
the vehicle’s audio system.
If there is a problem, you may see an error
message on the display.
2Error Messages P. 200
iPod® mode
Track list

149
XX
Playing an iPod®
XAudio Menu
Audio
Audio MenuHAUDIO button (in iPod® mode)
X AUDIO MENU
Rotate i to select an item. Press u.
The following items are available:
•Sound Setup: Displays the sound preferences screen.
2Adjusting the Sound
P. 158
•Music Search Setup: Use this feature to set up the music search abilities when
using Song By Voice™ (SBV) commands.
2Music Search Setup
P. 44
•Repeat
6: Repeats the current track.
•Shuffle:
F: Plays all tracks in the track list in random order.
L: Plays all tracks in the track list in random order by albums. Each song in an
album is played in the right order and only the order of albums is randomised.
•Album Art: Sets whether to display the album artwork on the screen.
ON (factory default): Displays the album artwork.
OFF: Disable the feature.

150
XX
Playing an iPod®
XSearching for Music
Audio
Searching for MusicHAUDIO button (in iPod® mode)
X MUSIC SEARCH
Search for music using the iPod® menu.
1.Rotate i to select a search
category. Press u.
2.Rotate i to select an item. Press
u.
X
The selection begins playing.
1Searching for Music
The order of the track list displayed if you select
“All” on the iPod® menu varies depending on
the iPod® model and software.
You can also search for music on the iPod®
through voice commands using SBV.
2Searching for Music Using Song By
Voice™ (SBV) P. 151
SHUFFLE ALL SONGS
Move r to select SHUFFLE ALL SONGS to
shuffle the playback of all tracks on the iPod®.
PLAY SELECTED
Move r to select PLAY SELECTED to play all the
items listed below.

151Audio
Searching for Music Using Song By Voice™ (SBV)Use Song By Voice™ (SBV) to search for and play music from your HDD or iPod®
device using voice commands.
1.Set Song By Voice to ON in the
system setup.
2Song By Voice™ (SBV)
P. 45
2.Say d “Hard Disc Drive Search” or
d “iPod Search” to activate the
SBV feature for the HDD or iPod®.
X
The SBV commands that you
can use are displayed on the
screen.
3.Say a command.
X
Example 1: Say d “List Artist
‘Artist A’” to view a list of songs
by that artist. Select the desired
song to start playing.
X
Example 2: Say d “Play Artist
‘Artist A’” to start playing songs
by that artist.
4.To cancel SBV mode, press the K
(Back) button on the steering
wheel or any button on the
navigation system interface. The
selected song continues playing.
1Searching for Music Using Song By Voice™ (SBV)
The SBV voice commands give you more control
over the music than the regular iPod® and HDD
voice commands.
2Song By Voice™ Commands P. 223
You can add phonetic modifications of difficult
words so that it is easier for SBV to recognize
artists, songs, albums, and composers in voice
commands.
2Phonetic Modification P. 46
SBV may not be able to recognize languages
other than English for the artist name, song title,
album title, and composers.
Once you have cancelled this mode, you need to
say d “Hard Disc Drive Search” or d “iPod
Search” again to re-activate this mode.

152Audio
Playing a USB Flash Drive1.Unclip the USB connector in the front console and loosen the adapter cable.
2.Install the USB flash drive to the USB connector.
Use a recommended USB flash drive of 256 MB or higher.
Some digital audio players may not be compatible.
Some USB flash drives (e.g., a device with security lockout) may not work.
Some software files may not allow for audio play or text data display.
Some versions of MP3, WMA, or AAC formats may be unsupported.■Connecting a USB Flash Drive
1Connecting a USB Flash Drive•Do not use an extension cable with the USB
adapter cable.•Do not connect your USB flash drive using a
hub.•Do not use a device such as a card reader or
hard disk drive, as the device or your tracks
may be damaged.•We recommend backing up your data before
using the device in your vehicle.
■USB Flash Drives
1USB Flash Drives
Digital music tracks, such as MP3, WMA, AAC,
etc., in USB flash drives cannot be copied to
HDD. Likewise, digital music tracks recorded to
HDD cannot be copied to USB flash drives.

153
XX
Playing a USB Flash Drive
XSelecting USB Mode
Audio
Selecting USB Mode1.Connect the USB flash drive to the USB adapter cable in the console
compartment.
2.Press the HDD/AUX button until you get to USB mode.
3.Select a track using skip, scan, folder list, or track list.X
The current track number and folder number are displayed on the display.
Audio Screen ControlHAUDIO button (in USB mode)
Control the audio screen through the navigation system.
Rotate i to select a track. Press u.
XMove e to select FOLDERS to
display the folder list. 2Playing Tracks in Folders
P. 155
XMove r to select AUDIO MENU. 2Audio Menu
P. 154
1Playing a USB Flash Drive
d “Display audio screen”
You can control the USB flash drive using voice
commands.
2USB Commands P. 222
A visual guide helps you operate the audio
system.
2System Controls P. 4
2Basic Operation P. 6
Tracks on the USB flash drive are played in their
stored order. This order may be different from
the order displayed on your PC or device.
The audio system displays “Unplayable File,” and
then skips to the next track when the following
tracks are played:•Tracks in WMA or AAC format protected by
digital rights management (DRM)•Tracks in unsupported format
If there is a problem, you may see an error
message on the display.
2Error Messages P. 200
USB mode
Track list

154
XX
Playing a USB Flash Drive
XAudio Menu
Audio
Audio MenuHAUDIO button (in USB mode)
X AUDIO MENU
Rotate i to select an item. Press u.
The following items are available:
•Sound Setup: Displays the sound preferences screen.
2Adjusting the Sound
P. 158
•Repeat:
6: Repeats the current track.
7: Repeats all tracks in the current folder.
•Random:
F: Plays all tracks on the USB flash drive in random order.
I: Plays all tracks in the current folder in random order.
•Scan:
1: Scans all tracks in the current folder in the order they were stored and plays
a 10-second sample. Select OFF to stop scanning and play the current selection.
2: Scans the first track in each folder on the USB flash drive and plays a 10-
second sample. Select OFF to stop scanning and play the current selection.

155
XX
Playing a USB Flash Drive
XPlaying Tracks in Folders
Audio
Playing Tracks in FoldersHAUDIO button (in USB mode)
X FOLDERS
Change the folder if the tracks are stored in a folder structure.
1.Rotate i to select a folder. Press
u.
X
The system displays the track
list.
2.Rotate i to select a track. Press
u.
X
The system begins playing the
selected track.
1Playing Tracks in Folders
Folder List•Any music tracks not in a folder are
automatically added to a “ROOT” folder,
which is displayed at the top of the Folder List.•If the root folder has additional folders in a
lower layer, they are listed on the screen.

156Audio
Playing Bluetooth® AudioYour audio system allows you to listen to music tracks stored on your Bluetooth-
compatible phone.
This function is available when the phone is linked to the vehicle’s Bluetooth®
HandsFreeLink® (HFL) system. 2Bluetooth® HandsFreeLink®
P. 161
Selecting Bluetooth® Audio Mode1.Make sure that your phone is on, paired, and linked to HFL. 2Pairing a Phone
P. 164
2.Press the HDD/AUX button to select Bluetooth® Audio mode.
X
A Bluetooth® message and icon are displayed on the display and screen.
3.If necessary, follow the cell phone operating instructions for playing audio tracks.
Check the following if the phone is not recognized:
•Another HFL-compatible phone, which is not compatible for Bluetooth® Audio, is
already connected.
1Playing Bluetooth® Audio
d “Display audio screen”
You can control the Bluetooth® Audio using
voice commands.
2Bluetooth® Audio Commands P. 223
Not all Bluetooth-enabled phones with
streaming audio capabilities are compatible. To
check if your phone is compatible:•Canada: Visit www.handsfreelink.ca.•Call HandsFreeLink customer support at
(888) 528-7876.
In some provinces, it may be illegal to perform
some data device functions while driving.
Only one phone can be used with HFL at a time.
When there are more than two paired phones in
the vehicle, the first paired phone the system
finds will be automatically linked.
Pressing the TITLE button switches the centre
display between the Bluetooth® Audio message
and the device name.