check engine Acura ILX 2014 Owner's Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2014, Model line: ILX, Model: Acura ILX 2014Pages: 351, PDF Size: 7.94 MB
Page 2 of 351

Contents
Child Safety P. 48 Exhaust Gas Hazard P. 60 Safety Labels P. 61Opening and Closing the Trunk P. 102 Security System P. 106 Opening and Closing the Windows P. 108
Operating the Switches Around the Steering Wheel P. 112 Adjusting the Mirrors P. 121
Interior Lights/Interior Convenience Items P. 131 Climate Control System P. 136Audio Error Messages
* P. 170 General Information on the Audio System P. 173
Bluetooth® HandsFreeLink® P. 179
When Driving P. 216 Braking P. 237 Parking Your Vehicle P. 241
Fuel Economy P. 245 Accessories and Modifications P. 246Maintenance Under the Hood P. 256 Replacing Light Bulbs P. 274
Checking and Maintaining Tires P. 286 Battery P. 295 Remote Transmitter Care P. 296
Cleaning P. 298Engine Does Not Start P. 311 Jump Starting P. 314 Shift Lever Does Not Move P. 317
Fuses P. 324 Emergency Towing P. 327Devices that Emit Radio Waves P. 335 Reporting Safety Defects P. 336
Authorized Manuals P. 341 Client Service Information P. 342
Quick Reference Guide
P. 2
Safe Driving
P. 21
Instrument Panel
P. 63
Controls
P. 91
Features
P. 141
Driving
P. 209
Maintenance
P. 247
Handling the Unexpected
P. 303
Information
P. 329
Index
P. 343 
Page 8 of 351

7Quick Reference Guide
Safe Driving 
(P 21)
Airbags 
(P 33)
●Your vehicle is fitted with airbags to help protect you and 
your passengers during a moderate-to-severe collision.
Child Safety 
(P 48)
●All children 12 and younger should be seated in the rear seat.
●Smaller children should be properly restrained in a forward-facing child seat.
●Infants must be properly restrained in a rear-facing child seat.
Exhaust Gas Hazard 
(P 60)
●Your vehicle emits dangerous exhaust gases that contain carbon 
monoxide. Do not run the engine in confined spaces where carbon 
monoxide gas can accumulate.
Before Driving Checklist 
(P 25)
●Before driving, check that the front seats, head restraints, 
steering wheel, and mirrors have been properly adjusted.
Seat Belts 
(P 26)
●Fasten your seat belt and sit upright well 
back in the seat.
●Check that your passengers are wearing 
their seat belts correctly.
Fasten your lap belt as 
low as possible.* Not available on all models 
Page 16 of 351

15Quick Reference Guide
Maintenance 
(P 247)
Under the Hood 
(P 256, 257)
●Check engine oil, engine coolant, and windshield washer 
fluid. Add when necessary.
●Check brake fluid and clutch fluid.
●Check the battery condition monthly.
a
Pull the hood release handle under the corner of the 
dashboard.
b
Locate the hood latch lever, slide the lever and lift the 
hood.
c
When finished, close the hood and make sure it is firmly 
locked in place.
Lights 
(P 274)
●Inspect all lights regularly.
Wiper Blades 
(P 284)
●Replace blades if they leave streaks 
across the windshield.
Tires 
(P 286)
●Inspect tires and wheels regularly.
●Check tire pressures regularly.
●Install snow tires for winter driving. 
Page 17 of 351

16Quick Reference Guide
Handling the Unexpected 
(P 303)
Flat Tire 
(P 305)
●Park in a safe location and replace the 
flat tire with the compact spare tire in the 
trunk.
Indicators Come On (P 320)
●Identify the indicator and consult the 
owner's manual.
Engine Won't Start 
(P 311)
●If the battery is dead, jump start using a 
booster battery.
Blown Fuse 
(P 324)
●Check for a blown fuse if an electrical 
device does not operate.
Overheating 
(P 318)
●Park in a safe location. If you do not see 
steam under the hood, open the hood, 
and let the engine cool down.
Emergency Towing (P 327)
●Call a professional towing service if you 
need to tow your vehicle. 
Page 18 of 351

17Quick Reference Guide
What to Do If
The power mode does not 
change from VEHICLE OFF 
(LOCK) to ACCESSORY. 
Why?
●The steering wheel may be locked.●Move the steering wheel left and right after 
pressing the ENGINE START/STOP button.
The power mode does not 
change from ON to 
VEHICLE OFF (LOCK). Why?
The shift lever should be moved to 
(P.
Why does the brake pedal 
pulsate slightly when 
applying the brakes?
This can occur when the ABS activates, and does not indicate a 
problem. Apply firm, steady pressure on the brake pedal. Never 
pump the brake pedal.
The rear door cannot be 
opened from inside the 
vehicle. Why?
Check if the childproof lock is in the 
LOCK position. If so, open the rear 
door with the outside door handle.
To cancel this function, push the lever 
to the UNLOCK position. 
Page 65 of 351

64Instrument Panel
IndicatorsIndicator
Name
On/Blinking
Explanation
Message
Parking Brake 
and Brake System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when the parking brake is 
applied, and goes off when it is 
released.●Comes on when the brake fluid level 
is low.●Comes on if there is a problem with 
the brake system.●The beeper sounds and the indicator 
comes on if you drive with the 
parking brake not fully released.
●Comes on while driving - Make sure the 
parking brake is released. Check the brake 
fluid level.
2What to do when the indicator comes 
on while driving P. 322
●Comes on along with the ABS indicator 
- Have the vehicle checked by a dealer.
2If the Brake System Indicator Comes 
On P. 322
Low Oil Pressure 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.●Comes on when the engine oil 
pressure is low.
●Comes on while driving - Immediately 
stop in a safe place.
2If the Low Oil Pressure Indicator 
Comes On P. 320
U.S.Canada 
Page 66 of 351

65
uuIndicatorsu
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Malfunction 
Indicator Lamp
●Comes on when you set the power 
mode to ON, and goes off either 
when the engine starts or after 
several seconds if the engine is not 
started. If “readiness codes” have 
not been set, it blinks five times 
before it goes off.●Comes on if there is a problem with 
the emissions control system.●Blinks when a misfire in the engine's 
cylinders is detected.
●Readiness codes are part of the on board 
diagnostics for the emissions control 
systems.
2Testing of Readiness Codes P. 337
●Comes on while driving - Have the 
vehicle checked by a dealer.●Blinks while driving - Stop in a safe place 
where there are no flammable objects. Stop 
the engine for 10 minutes or more, and 
wait for it to cool down. Then, take the 
vehicle to a dealer.
2If the Malfunction Indicator Lamp 
Comes On or Blinks P. 321
Charging System 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.●Comes on when the battery is not 
charging.
●Comes on while driving - Turn off the 
climate control system and rear defogger in 
order to reduce electricity consumption.
2If the Charging System Indicator 
Comes On P. 320
Shift Lever 
Position 
Indicator
*
●Indicates current shift lever position.
2Shifting P. 222
—
* Not available on all models 
Page 69 of 351

68
uuIndicatorsu
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Electric Power 
Steering (EPS) 
System Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.●Comes on if there is a problem with 
the EPS system.
●Stays on constantly or does not come 
on at all - Have the vehicle checked by a 
dealer.
2If the Electric Power Steering (EPS) 
System Indicator Comes On P. 322
VSA® (Vehicle 
Stability Assist) 
System Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Blinks when VSA® is active.●Comes on if there is a problem with 
the VSA system or hill start assist 
system.
●Stays on constantly - Have the vehicle 
checked by a dealer.
2VSA® (Vehicle Stability Assist), aka ESC 
(Electronic Stability Control), System 
P. 232
VSA® (Vehicle 
Stability Assist) 
OFF Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when you deactivate 
VSA®.
2VSA® (Vehicle Stability Assist), aka ESC 
(Electronic Stability Control), System 
P. 232
— 
Page 72 of 351

71
uuIndicatorsu
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Side Airbag Off 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when the passenger side 
airbag system is automatically shut 
off.
●It does not mean there is a problem with 
your side airbags.●Comes on when nobody is sitting in the 
passenger seat - Have the vehicle checked 
by a dealer.●Comes on when someone is sitting in 
the seat - Have the passenger sit properly.
Immobilizer 
System Indicator
●Comes on briefly when you set the 
power mode to ON, then goes off.●Comes on if the immobilizer system 
cannot recognize the key 
information.
●Blinks - You cannot start the engine. Set 
the power mode to VEHICLE OFF (LOCK), 
then select the ON mode again.●Repeatedly blinks - The system may be 
malfunctioning. Have the vehicle checked 
by a dealer.●Do not attempt to alter this system or add 
other devices to it. Electrical problems can 
occur.
—
U.S.Canada
U.S.Canada 
Page 75 of 351

74
uuIndicatorsuMulti-Information Display Warning and Information Messages
Instrument Panel
Message
Condition
Explanation
●Appears when the engine coolant temperature gets 
abnormally high.
2Overheating P. 318
●Appears when the engine coolant temperature gets 
high.
●Drive slowly to prevent overheating.
●Appears when there is a problem with the sensor on the 
battery.●Appears when the battery is not charging.
●Have your vehicle checked by a dealer.
2Checking the Battery P. 295
●Appears along with the battery charging system 
indicator - Turn off the climate control system and rear 
defogger to reduce electricity consumption.
2If the Charging System Indicator Comes On P. 320