key Acura MDX 2007 Owner's Manual

µ
For example, infants and small
childrenleftinavehicleonahot
day can die from heatstroke. A
child left alone with the key in the
ignition switch can accide ntally set
the vehicle in motion, possibly
injuring themselves or others.
If
you are not wearing a
seat belt in a crash, you could be
thrown forward and crush the
child against the dashboard or a
seat-back. If you are wearing a
seat belt, the child can be torn
from your arms and be seriously
hurt or killed.
During a crash, the
belt could press deep into the child
and cause serious or fatal injuries.
This can prevent children
from accidentally falling out (see
page ). If
a child wraps a loose
seat belt around their neck, they
can be seriously or fatally injured.
(See pages and f or how to
activate and deactivate the
lockable retractor.) Children who play in vehicles can
accidentally get trapped inside.
Teach your children not to play in
or around vehicles.
Even very young
children learn how to unlock
vehicle doors, turn on the ignition
switch, and open the tailgate,
which can lead to accidental injury
or death.
If they do, they
could be very seriously injured in a
crash.
Leaving children without
adult supervision is illegal in most
states and Canadian provinces,
and can be very hazardous.
131 50 51
Protecting Children General Guidelines
Additional Saf ety Precautions
Neverholdaninfantorchildon
your lap.
Never put a seat belt over yourselfand a child.
Use childproof door locks t oprevent children f rom opening t hedoors. Make sure any unused seat belt
t hat a child can reach is buckled,the lockable retractor is activated,and the belt is f ully retracted andlocked.
Lock all doors and the tailgatewhen your vehicle is not in use.
K eep vehicle keys/remot etransmitters out of the reach ofchildren.
Never let two children use the
same seat belt .
Do not leave children alone in avehicle.
Driver and Passenger Saf ety
41
——y
y
()-yy

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your vehicle. All the essential
controls are within easy reach............................
Control Locations .62
............................
Instrument Panel .63
..........
Instrument Panel Indicators .64
.............................................
Gauges .72
.............
Multi-Inf ormation Display .73
Controls Near the Steering
.........................................
Wheel .115
Windshield Wipers and .................................
Washers .116
Rear Window Wiper and ...................................
Washer .117
.........
Turn Signal and Headlights . 118
...............
Hazard Warning Button . 122
...............
Rear Window Def ogger . 122
......
Instrument Panel Brightness . 123
......
Steering Wheel Adjustments . 124
.............................
Keys and Locks .126
......................
Immobilizer System .128
..............................
Ignition Switch .129
....................................
Door Locks .130
............
Childproof Door Locks . 131
..........................................
Tailgate .131
..........................
Power Tailgate .132
.....................
Remote Transmitter .135
...............................................
Seats .140
...................
Detachable Anchor . 144..................................
Seat Heaters .146
............................
Power Windows .147
.......................................
Moonroof .150
...............................
Parking Brake .151
...........................................
Mirrors .152
Driving Position Memory ........................................
System .155
...............................
Interior Lights .157
.........
Interior Convenience Items . 160
.....................
Beverage Holders .161
.............
Console Compartment . 162
..............
Storage Compartment . 162
..................................
Glove Box .162
....................
Sunglasses Holder .163
.............................
Cargo Hooks .163
...................................
Sun Visor .164
............................
Vanity Mirror .164
........
Accessory Power Sockets . 164
.......................
AC Power Outlet .165
Instruments and Controls
Inst rument s and Cont rols
61
——y
y
()-yy

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If this indicator comes on at
any other time, there is a problem in
the SH-AWD system. You will also
see a ‘‘CHECK SH-AWD SYSTEM’’
message on the multi-information
display(seepage ).Takeyour
vehicle to a dealer to have it checked.
For more information, see page .Pull
to the side of the road wh en it is
safe, shift to Park, and let the engine
idle until the indicator goes out. This
indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink,
and the engine’s fuel system will be
disabled. (see page ).
If
the indicator blinks while driving,
it indicates the differenti al
temperature is too high.
You will also see a ‘‘SH-AWD DIFF
TEMP. HIGH’’ message on the
multi-info rmation display (see page
).
82 82
128
340
SH-AWD Indicator Immobilizer System
Indicator
Instrument Panel Indicators
Inst rument s and Cont rols
69
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
——y
y
()-yy

When the main menu displays
‘‘Keyless Memory Settings ,’’ you
can customize some vehicle control
settings.
To enter the customizing mode,
press the SEL/RESET button. If
you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
You can customize some vehicle
control settings for ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separate ly. If ‘‘DRIVER
1’’ or ‘‘DRIVER 2’’ is not displayed,
cu stomizing is not possible.
To have the driver’s ID detected,
make sure your remote transmitter
is linked to the system (see Keyless
Memory Settings on page ).If
you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Ref er to the table on the f ollowing
pages about the settings you want to
customize. If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park. 86
139TM
CONT INUED
Multi-Inf ormation Display
Customize Settings
Inst rument s and Cont rols
83
TM
—

—yy
()-yy

ÎÎÎ
Î Î
Î
Î
Î
Î
µ™ ¶™
µ™¶™
Î TRIP B
LOW
MIN
OFF
ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
ON
OFF
HIGH
MID
LOW
MANUAL ONLY
IGN OFF
TRIP A
MAX
HIGH
MID
ON
OFF
ON
OFF
Changes the language used in the display.
Changes the outside temperature reading a
bove or
below i ts current reading.
Causes trip me ter A and the average fuel e conomy
to reset when you refuel.
Changes the indicator alarm volumes into three
levels.
Resets the elapsed time of your current trip.
Changes the interior light sensitivity to your liking.
Changes the driver’s seat, the steering wheel, and
the outside mirror positions to a stored setting.
Mo ves the steering wheel fully in and up when
the key is removed.
METER SETUP
(P.89)
POSITION SETUP
(P.97)
90
91
92
93
94
95
98
99
LANGUAGE
SELECTION
ADJUST OUTSIDE
TEMP. DISPLAY
TR IP A & AVG. FUEL
RESET with REFUEL
ADJUST
ALARM VOLUME
ELAPSED TIME RESET
AUTO INTERIOR
ILLUMINATION
MEMORY POSITION LINK
AUTO TILT & TELESCOPE
STEERING WHEEL
: Default setting
Setting Option
Description
Group Setup Page
Menu Item
Multi-Inf ormation Display
84
——y


y
()-yy

Î
Î
Î Î
Î
Î
Î
Î Î
Î
Menu Item Description
Group Setup Page Setting Option
INTERIOR LIGHT
DIMMING TIME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
WIPER ACTION Changes
how long (in seconds) the interior lights
stay on after you close the doors and the tailgate.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.
Changes the setting of when to automatically lock
the doors.
Changes the setting of when to automatically
unlock the driver’s/all the doors.
Changes which doors unlock with the remote
transmitter in a first push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Changes the wiper operation between two settings
when the wiper switch is in the INT position.
Set/ Cancel all the customized settings as default.
LIGHTING
SETUP
(P.100)
DOOR/WINDOW
SETUP
(P.105)
WIPER SETUP
(P.113)
DEFAULT ALL
(P.86) 101
102
103
106
107
109
110
111
113
86
60 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
SHIFT FROM P
WITH VEH SPD
OFF
IGN OFF
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 sec
60 sec
30 sec
INTERMITTENT
WITH VEH SPD
SET
CANCEL 15 sec
0sec
LOW
MIN
: Default setting
SHIFT TO P DRIVER DOOR/ ALL DOORS
Multi-Inf ormation Display
Inst rument s and Cont rols
85
——y


y
()-yy

ÛÝÛÝ
CONT INUED
Auto Tilt & Telescope Steering Wheel
When ‘‘AUTO TILT & TELESCOPE
STEERING WHEEL’’ is set to ‘‘ON,’’
the steering wheel automatically
moves f ully in and up when you turn
the ignition switch to the LOCK (0)
position and remove the key.
You can choose this customize item
f rom ‘‘POSITION SETUP’’ by
pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
TILT & TELESCOPE STEERING
WHEEL’’ and repeat the procedure
again.
Multi-Inf ormation Display
Inst rument s and Cont rols
99
——y

y
()-y
y

ÛÝÛÝ
Headlight Auto Of f Timer
You can choose this customize item
f rom ‘‘LIGHTING SETUP’’ by
pressing the INFO ( / ) button
repeatedly.Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
The headlights, parking lights, side
marker lights, taillights, and license
plate lights go of f af ter the selected
time when you remove the key f rom
the ignition switch and close the
driver’s door. To change how long
thelightsstayonbeforetheygooff,
f ollow these instructions:
Multi-Inf ormation Display
102
——y

y
()-y
y

Û
Ý
ÛÝ
ÛÝ
CONT INUED
Here are the five custom settings for
the door/window setup:AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE UNLOCK
MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK TIMER
While ‘‘DOOR/WINDOW SETUP’’
is shown, press the SEL/RESET
button to enter the customize mode.
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Multi-Inf ormation Display
Door/Window Setup
Inst rument s and Cont rols
105
SEL/RESET
BUTTON
INFO ( or )
BUTTON
——y

y
()-y

y

ÛÝÛÝ
Key and Remote Unlock Mode
To select whether the driver’s door
unlocks or all the doors unlock when
you unlock the doors with the
remote transmitter, follow these
instructions.
You can choose this customize item
f rom ‘‘DOOR/WINDOW SETUP’’ by
pressing the INFO ( / ) button
repeatedly.Press the SEL/RESET button to see
the selections.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘KEY
AND REMOTE UNLOCK MODE’’
and repeat the procedure again.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
109
——y

y
()-y

y