keyless Acura MDX 2007 Owner's Manual

When the main menu displays
‘‘Keyless Memory Settings ,’’ you
can customize some vehicle control
settings.
To enter the customizing mode,
press the SEL/RESET button. If
you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
You can customize some vehicle
control settings for ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separate ly. If ‘‘DRIVER
1’’ or ‘‘DRIVER 2’’ is not displayed,
cu stomizing is not possible.
To have the driver’s ID detected,
make sure your remote transmitter
is linked to the system (see Keyless
Memory Settings on page ).If
you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Ref er to the table on the f ollowing
pages about the settings you want to
customize. If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park. 86
139TM
CONT INUED
Multi-Inf ormation Display
Customize Settings
Inst rument s and Cont rols
83
TM
—

—yy
()-yy

Î
Î
Î Î
Î
Î
Î
Î Î
Î
Menu Item Description
Group Setup Page Setting Option
INTERIOR LIGHT
DIMMING TIME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
WIPER ACTION Changes
how long (in seconds) the interior lights
stay on after you close the doors and the tailgate.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.
Changes the setting of when to automatically lock
the doors.
Changes the setting of when to automatically
unlock the driver’s/all the doors.
Changes which doors unlock with the remote
transmitter in a first push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Changes the wiper operation between two settings
when the wiper switch is in the INT position.
Set/ Cancel all the customized settings as default.
LIGHTING
SETUP
(P.100)
DOOR/WINDOW
SETUP
(P.105)
WIPER SETUP
(P.113)
DEFAULT ALL
(P.86) 101
102
103
106
107
109
110
111
113
86
60 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
SHIFT FROM P
WITH VEH SPD
OFF
IGN OFF
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 sec
60 sec
30 sec
INTERMITTENT
WITH VEH SPD
SET
CANCEL 15 sec
0sec
LOW
MIN
: Default setting
SHIFT TO P DRIVER DOOR/ ALL DOORS
Multi-Inf ormation Display
Inst rument s and Cont rols
85
——y


y
()-yy

Û
Ý
ÛÝ
ÛÝ
CONT INUED
Here are the five custom settings for
the door/window setup:AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE UNLOCK
MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK TIMER
While ‘‘DOOR/WINDOW SETUP’’
is shown, press the SEL/RESET
button to enter the customize mode.
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Multi-Inf ormation Display
Door/Window Setup
Inst rument s and Cont rols
105
SEL/RESET
BUTTON
INFO ( or )
BUTTON
——y

y
()-y

y

ÛÝÛÝ
Keyless Lock Acknowledgment
When you push the LOCK button on
the remote transmitter, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the tailgate
arelockedandthesecuritysystem
has set (see page ). You can
customize the exterior lights not to
f lash and the beeper not to sound.
You can choose this customize item
f rom ‘‘DOOR/WINDOW SETUP’’ by
pressing the INFO ( / ) button
repeatedly.Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
265
Multi-Inf ormation Display
110
——y

y
()-y

y

ÛÝ
Security Relock Timer
If you unlock the doors and the
tailgate with the remote transmitter,
but do not open any of the doors or
thetailgatewithin30seconds,the
doors and the tailgate automatically
relock and the security system sets.
You can change this relock time
f rom 30 seconds to 60 or 90 seconds.You can choose this customize item
f rom ‘‘DOOR/WINDOW SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘KEYLESS LOCK
ACKNOWLEDGMENT’’ and repeat
the procedure again.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
111
——y


y
()-y

y

µ
Ifyoucannotopenthetailgate,
remove the cover on the back of the
tailgate(seepage ).Pushthe
release lever to the right as shown,
then pull the outer handle to open
the tailgate. Press
this button once to
lock all doors and the tailgate. Some
exterior lights will flash. When you
push LOCK twice within 5 seconds,
you will hear a beep to verify that the
doors and tailgate are locked and the
security system has set. This button
does not work if any door or tailgate
is not fully closed. To change the ‘‘KEYLESS LOCK
ACKNOWLEDGEMENT’’ setting,
see page .
134 110
CONT INUED
MDX, Technology, and Sport Packages
models
Tailgate, Remote Transmitter
LOCK Remote Transmitter
Inst rument s and Cont rols
135
UNLOCK
BUTTON
PANIC
BUTTON LOCK
BUTTON
UNLOCK
BUTTON
PANIC
BUTTONLOCK
BUTTON
U.S. Entertainment Packages and
Canadian Elite Package models
MDX, Technology, and Sport
Packages models
TAILGATE
BUTTON
——y


y
()-y
y

Here are the settings activated with
the remote;
Driving position memory
(see page ).
When you unlock the driver’s door
with your remote, each remote
activates the keyless memory
settings related to that remote. The
driver’s ID (MEMORY 1 or
MEMORY 2) is shown on the back
of each remote. You
will also see the ‘‘WELCOME
DRIVER 1’’ or ‘‘WELCOME
DRIVER 2’’ message on the multi-
info rmation display, dep ending on
which linked remote transmitter is
used.
To turn off this feature, press and
hold the LOCK and UNLOCK
buttonsatthesametime.TheLED
in the remote will blink twice. Then
release the buttons. Doing this
cancels the keyless memory settings
for that remote and restores the
default settings.
To turn the keyless memory settings
back on, repeat this procedure. The
LED will blink once to indicate the
fe ature has been turned on.
The steering wheel will move to the
stored position when you insert the
key into the ignition switch.
When
you unlock and open the
driver’s door with the remote
transmitter, the driver’s seat (except
the power lumbar feature) and
outside mirrors start to move to the
positions stored in memory. The
indicator in the related memory
button to the remote comes on.
Audio
system settings
(see page ).
Climate control settings
(see page ).
Customized
settings
(see page ). 83
155 198 169
K eyless Memory Settings
Remote Transmitter
Inst rument s and Cont rols
139
TM
——y

y
()-y
y

CONT INUED
.......................
Hood, Opening the .319
................................................
Horn .115
...
Identif ication Number, Vehicle .444
Ignition
............................................
Keys .126
.........................................
Switch .129
............
Timing Control System .331
......................
Immobilizer System .128
.........
Important Safety Precautions .6
.........
Indicators, Instrument Panel .63
......
Ac tive Damper System . 71, 353
...............
ABS (Anti-lock Brake) .66
....................................
A/T Temp .68
Brake (Parking and Brake
............................
System) . 65, 432
.........................
Brake Lamp . 65, 432
................
Charging System . 65, 430
.............................
Cruise Control .70
.................................
Cruise Main .70
DRL (Daytime Running ......................................
Lights) .70
...................................
Fog Lights .70
...................................
High Beam .70 ........
Key (Immobilizer System) . 69
.....................................
Lights On .70
......................................
Low Fuel .71
................
Low Oil Pressure . 65, 430
......................
Low Tire Pressure .68
...
Malf unction Indicator Lamp . 431
..........................
Security System .71
...........................
Side Airbag Of f .66
.......................................
Seat Belt .64
..............................
SH-AWD . 69, 340
...............................................
SRS .66
...................
System Message . 68, 80
...............
Tire Pressure Monitor . 68
Turn Signal and Hazard ...................................
Warning .67
............................
VSA Activation .67
.................................
VSA System .67
..................
Individual Map Lights . 158
...............................
Inf ant Restraint .42
......................................
Inf ant Seats .42
...................
Inf lation, Proper Tire . 409
.................................
Inside Mirror .152
.............................
Inspection, Tire .411
........................
Instrument Panel .4 ,63
......
Instrument Panel Brightness . 123
........................
Interface Dial . 198, 303 ...............................
Interior Lights .157
........................................
Introduction . i
.................
Jacking up the Vehicle . 422
.......................................
Jack, Tire .419
................................
Jump Starting .426
................................................
Keys .126
...........
Keyless Memory Settings . 139
.......................
Label, Certif ication .444
...............
Lane Change, Signaling . 118
..................
Lap/Shoulder Belts . 15, 21
....................
Light Control Switch .157
Index
J
L K
I
INDEX
V
——y

y
()-yy