display Acura MDX 2014 Advanced Technology Guide

31
30
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
General Commands • Display map
• Display menu
• Display phone
• Information
• Display audio screen
• What time is it?Find Place Commands • Find nearest: - ATM - Acura dealer
- gas station - airport
- Mexican - hospital restaurant - bank
- post officeNavigation Commands • How long/far to the destination?
• Display destination map
• Display entire routeDisplay Commands • Display (or hide): - ATM
- gas station
- restaurant
- post office
• Display north up/heading up
• Zoom in/out
• Go home
• Display current location
Audio Commands • Radio on
• Radio # FM/AM
• Radio preset 1/2/3/4/5/6
• XM channel #
• XM preset 1/2/3/4/5/6
• DISC play
• DISC play track #
• DISC skip forward/back
• iPod/USB/HDD playPhone Commands* • Dial by name
• Dial by numberClimate Control Commands• Air conditioner on/off
• Rear defrost on/off
• Climate control recirculate/ fresh air
• Fan speed up/down
• Temperature # degrees (# = 57–87)
• Temperature max hot/coldHelp Commands• Voice help (list of all available commands by
category)
*Available on all vehicles
Here are some examples of commonly used voice commands for vehicles equipped with
navigation. Try some of these to familiarize yourself with the voice command system.Commonly Used Voice Commands
14 MDX ATG_ATG Facing 3/29/2013 12:39 PM Page 30

Press and release the Talk button before you say a command.
3332
NAV\bGAT\b\fN
Realtime navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination. Available with \fechnology and
Advance Packages.
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
For information on setting other destination options, see your Navigation \fanual.
1. Say “Address.”
2. Say “Street,” then say the streetname on the next screen. Do not
include the direction (N, S, E, W) or
type (St., Ave., Blvd., etc.).
3. A list of street names appears. Say the number next to the street you
want to select.
4. Say the entire street address number. For example, “1234.” If
necessary, say “\bK” to proceed.
5. If the street address is in more than one city, a list of city names
appears. Say the number next to
the city you want to select.
6. Say “Set as destination” to set the route.
1. Say “Find nearest A\fM.”
2. A list of the nearest AT\fs in your areais displayed by shortest distance to
destination.
3. Say the number next to the destination you want to select.
4. Say “Set as destination” to set the route.
Note: It is recommended that you enter your destination before driving or
when the vehicle is stopped. Provides continuously updated information, including \Ntraffic speed, incidents, and
construction in major metro areas.
Displaying Traffic \bnformation
Say “Display traffic” to view traffic flow and incident icons.
Note: Traffic flow and incident icons
are displayed on map scales of 5
miles or less.
Heavy traffic
Moderate traffic
Freeflow traffic
*AcuraLink subscription s\aervice (complimentary for the first three years of vehicle ownership)
Incident
\bncident \bcons
Congestion
Construction
Road closed
Weather
1. Say “Display traffic on my route” to view a list of incidents on your route.
2. Say the number of the incident you want to avoid.
3. Say “Avoid” and the incident list returns.
4. Say “Recalculate route” to set the new route.
Traffic ReroutingTM
The system can automatically provide detours around traffic or
incidents when a destination is set and Traffic Rerouting is turned on in
Navi Settings (see page 52), or you can manually reroute.
Entering a Destination Using Voice CommandsAcuraLink RealTime Traffic TM*
Entering a Street Address
Using the “Find Nearest” Command
\bncident
icon
\bncident
icon Traffic
Flow
data
Traffic
Flow
data
14 MDX ATG_RP1_Corre\Acted Pages_ATG Facin\Ag \b/5/2013 11\f53 \AAM Page 32

35
34Shows a more detailed view of the next maneuver during route guidance on the
multi-information display. See your Owner’s Manual for instructions on how to
turn this feature on or off.
BLUETOOTH
®HANDSFREELINK
®(HFL)
Make and receive phone calls through your vehicle’s audio system. Visit
www.acura.com/handsfreelinkto check if your phone is compatible.
To reduce the potential for driver distraction, certain manual functions may
be inoperable or grayed out while the vehicle is moving. Voice commands
are always available.
Calculated
route
Distance to go Next guidance
point
Time to go Current vehicle
location
Distance to
next maneuver
Current route Upcoming maneuver
Pick-Up button:
Answer an incoming call or
display speed dial and call history in the MID.
Hang-Up/Back button: End or decline a call,
clear HFL information in the MID, or cancel
an operation.
Selector wheel: Scroll through speed dial
and call history in the MID. Press to make a
selection.
Talk button: Make a call using a stored voice
tag, phonebook name, or phone number.
PHONE button:
Go to the phone
screen.
BACK button:
Cancel an
operation or
return to the
previous screen.
Interface Dial:
Rotate to scroll
through selections
and press to enter
a selection. MENU button:
From the Phone
screen, access
Speed Dial, Call
History,
Phonebook, and
more.
SETTINGS button:
Go to Phone
Settings to pair a
phone and set up
text/e-mail
options.
Map Screen Legend
Using HFL
Turn-by-Turn Directions
14 MDX ATG_ATG Facing 3/29/2013 12:40 PM Page 34

37
36
Use the interface dial to make and enter selections.
Use the interface dial to make and enter selections.
Pair your phone when the vehicle is stopped to begin using hands-free phone and
related audio functions.1. Press SETTINGS.
2. Select Phone Settings.
3. Select Bluetooth Device List (if nophone has been paired) or Connect
Phone (if pairing an additional phone).
4. Select Add Bluetooth Device.
5. Make sure your phone is in discovery mode.
6. HFL searches for your phone. Select your phone when it appears on the
list.
If your phone does not appear:
Select Device Not Found and search
for HandsFreeLink from your phone.
7. HFL gives you a six-digit code. Compare it to the code that appears
on your phone. Connect to HFL from
your phone.
8. The system asks if you want to enable Phone Synchronization. Select On to
automatically import contacts and
call history. Enter a 10-digit phone number to call.
Using the Menu*
1. Press PHONE.
2. Press MENU.
3. Select Dial.
4. From the navigation screen or theODMD, enter the phone number.
Select the green phone icon to call.
Press and release the Talk button to say a command.
Using Voice Commands
1. Say “Dial by number.”
2. Say the phone number. Forexample, “3-1-0-5-5-5-1-2-3-4.”
3. The system begins to dial.
Select items by touch.
Using the ODMD*
1. Select Shortcuts.
2. Select Phone.
3. Select Dial.
4. Enter the phone number and selectthe green phone icon to call.*Manual dialing is disabled while the vehicle is moving. Voice commands are always available.
A notification is heard and the incoming call information appears on the display.Pairing Your Phone
Dialing a Number
Receiving a Call
You can also
select the
icons on the
ODMD.
Press the Pick-Up
button to accept
the call.
Press the Hang-Up
button to end or
decline the call.
14 MDX ATG_ATG Facing 3/29/2013 12:40 PM Page 36

41
40SMS TEXT MESSAGING AND E-MAILReceive and send text messages and e-mails from your paired and linked phone using
Bluetooth® HandsFreeLink®. Visit www.acura.com/handsfreelinkto see if this feature
is compatible with your phone. Standard message rates apply. This feature is limited
while the vehicle is moving.
Use the interface dial to make and enter selections.
1. A notification appears on the display. Select Read to open the
message.
2. The message is displayed, and the system reads it aloud.
Use the interface dial to make and enter selections.
1. With the message open, selectReply.
2. Select one of the six available reply messages.
3. Select Send to send the message.
Use the interface dial to make and enter selections.
1. With the message open, select Call.
2. The system begins dialing the number.
Note: Notifications and operation for SMS Text and E-mail are separate. Choose
your desired account in the Phone Settings menu (see page 52).
BASIC AUDIO OPERATIONOperate basic controls of your audio system using multiple and convenient methods.
Left selector wheel: Roll up or down to
adjust volume, or push to mute. Move to
the left or right to skip back or forward in
stations or tracks.
SOURCE button: Change the audio source.
Slide back the
center console door
to connect a USB
flash drive or
iPhone/iPod dock
connector to the
USB port.
Change albums,
folders, or stations
Change or like/dislike
tracks
Select various controls depending on the audio source being played.Select an audio
source
Receiving Messages
Steering Wheel ControlsODMD ControlsUSB Connection
Replying to MessagesCalling the Sender When using steering wheel controls for audio operation, you can view the
information in
the MID

.
14 MDX ATG_ATG Facing 3/29/2013 12:41 PM Page 40

45
44HARD DISC DRIVE (HDD) AUDIORecord CDs onto your vehicle’s hard disc drive for future playback. Songs are
automatically recorded once a CD is inserted into the disc slot. Available with
Technology and Advance Packages.
SONG BY VOICE
™
Play songs from your iPod and HDD from most screens by using simple voice
commands. Available with Technology and Advance Packages.
1. Select Audio Source and select the HDD icon. The last recorded album begins playing.
2. Use the ODMD or steering wheel controls to change tracks.
Press and release the Talk button to say a command.
1. Say “Music search.”
2. Say “List” and a search option. For example, “List artist XYZ ” or “List
album XYZ.”
3. A list of tracks by the artist or album is displayed. Say the number
of your selection. For example,
“One.”
4. The system plays the selected song and returns to your original screen.
Select the HDD icon
from Audio Source.
Use the interface dial to make and enter selections.
Press and release the Talk button to say a command.
1. Say “Music search.”
2. Say “Play ” and a search option. For
example, “Play artist XYZ ” or “Play
song XYZ. ”
3. The system plays the first song by the artist or the specified song and
returns to your original screen.
1. Press AUDIO.
2. Press MENU.
3. Select Music Search.
4. Select one of thecategories.
5. Select a track and press ENTER to begin playing.
Playing HDD Audio
Using the “Play” CommandUsing the “List” Command
Searching for Music
14 MDX ATG_ATG Facing 3/29/2013 12:42 PM Page 44

49
48REAR ENTERTAINMENT SYSTEM (RES)Rear passengers can enjoy a different entertainment source than the front seat
occupants. Available with Technology Package.
1. Press REAR POWER to turn the system on.
2. Press REAR AUDIO.
3. Use the ODMD or front audio controls to choose a media source for the rear.
4. Press FRONT AUDIO to return to the front audio source.
Select an audio icon
from Rear Audio Source.
Front System Components
Rear
Power
button DVD
slot
Eject
button
1. Make sure REAR POWER is on in the front audio controls.
2. Open the overhead screen and lock it into place. Retrieve the wireless
headphones.
3. On the remote control, press DVD/AUX, CD, XM, or FM/AM.
4. Press
() ( ) (
 ) (
 )
to navigate the menu options. Press ENTER to make a
selection.
Rear Controls
Rear System Components
Front Controls
Press OPEN to release
the overhead screen.*
*Advance only
Advance Package RES shown for demonstration purposes.
Unfold the screen until it
locks into place.
Fold the screen back into
the ceiling until you hear
a click to close and lock it
into place.
Press the release button to detach
the remote control, if desired.
Headphone Operation
Your vehicle comes with two sets of
wir
eless headphones. Pivot the
earpieces to turn them on or off.
Wireless headphones work only in the
rear seats.
Wired headphones may also be used.
Plug them into the headphone
connectors in back of the rear console.
Press REAR AUDIO to
display and control rear
audio from the front.
Headphone
connectors
14 MDX ATG_ATG Facing 3/29/2013 12:44 PM Page 48

53
52
ACURA OWNERSVisit owners.acura.comand register to explore features and technologies specific to
your vehicle, schedule service appointments, obtain and update maintenance and
service records, manage your financial services account, and access other useful
information.
SETTINGS FOR YOUR VEHICLEChange different settings for many features in your vehicle. See your Owner’s Manual
for detailed information on settings and options.
Navi Settings (if equipped)
Change various settings for
navigation system routing.
Camera Settings
Change camera modes.
Vehicle Settings
Meter setup, door setup, and
more.
System Settings
Adjust the display, system
language, and more. Choose from the available options:
Phone Settings
Pair a phone, change call and
text/e-mail options, and more.
Info Settings
Import wallpaper and select
clock type.
Audio Settings
Change sound options and
various settings for audio
sources.
Rear Ent Settings(if equipped)
Change sound options and
various settings for the rear
entertainment system.
Press SETTINGS to enter
the settings menu.Use the interface dial to
make and enter selections.
Adjusting Settings
SAFETY REMINDERYour vehicle is equipped with airbags. Airbags do not replace your seat belts; they add
to the protection offered by seat belts. Airbags can help protect you in some types of
collisions, but they do not provide protection in all collisions.
Always make sure you and your passengers wear seat belts, and that young children
are properly secured in a child seat or booster in the rear seat. Never place an infant
seat in the front passenger’s seat as the force of a deploying airbag can seriously injure
an infant.FUEL RECOMMENDATIONUse of unleaded premium gasoline with an octane rating of 91 or higher is
recommended.
• Acura recommends TOP TIER Detergent Gasoline where available.
• Do NOT use gasoline containing more than 15% ethanol.
• Do NOT use gasoline containing methanol.
• Do NOT use gasoline containing MMT.
• See your Owner’s Manual for more information.
Some gasoline in North America contains MMT, a manganese-based fuel additive.
Prolonged and consistent use of gasoline containing MMT can deteriorate your
vehicle’s performance, fuel economy, and the emission control system. Always use
MMT-free gasoline if available. Failures caused by use of gasoline containing MMT may
not be covered under your new vehicle warranty.
TOP TIER Detergent Gasoline (recommended) never contains MMT and has detergent
additives to keep your engine clean. For further information on fuel and lubricants for
your car and information on gasoline that does not contain MMT, contact your dealer
or visit owners.acura.com.
14 MDX ATG_ATG Facing 3/29/2013 12:45 PM Page 52