CD changer ACURA NSX 1997 Service Repair Manual

Stereo Sound System

CD Changer Removal

1. Open the trunk lid.

2. Push the lock lever.

3. Remove the mounting bolt.

4. Remove the DIN cord from the CD changer.

CD CHANGER

5. Remove the CD changer bracket mounting nuts,

then remove the CD changer.

6. Install in the reverse order of removal.
NOTE: When you check a right taillight, perform bulb

check of a right taillight according to the following pro-

cedures.

1. Push the lock lever.

2. Loosing the mounting bolt.

3. Take down the CD changer.ProCarManuals.com

Stereo Sound System

Unit Terminals

For MAST

ANTENNA
DIN CONNECTOR

(for CD CHANGER)

For WINDOW

ANTENNA

Terminal Wire

Connects to

A1

A2

A3

A4

A5

A6

A7

A8

A9

A10

A11

A12

A13

A14

A15

A16
WHT

WHT

RED/BLK

WHT/YEL

YEL/RED

PNK/WHT

WHT

WHT

ORN

ORN

ORN/WHT

BLK/BRN

BLK/LT GRN

BLK

ORN

ORN
Passenger's door speaker amplifier

Driver's door speaker amplifier

Lights-on signal

Constant power (Tuning memory)

ACC (I) (Main stereo power supply)

Radio switched power (To antenna and

relay)

Foot well bass speaker (Driver's )

Foot well bass speaker (Passenger's )

Passenger's door speaker amplifier

Driver's door speaker amplifier

Cellular phone mute signal

Security (IN)

Security ground (G404)

Ground (G401, G402, G403)

Foot well bass speaker (Driver's )

Foot well bass speaker (Passenger's )
Power Amplifier Relay Test

1. Remove the power amplifier relay from under-hood

relay box B.

2. Check continuity at the relay terminals.

There should be continuity between the C and D

terminals.

There should be continuity between the A and B

terminals when power and ground are connect-

ed to the C and D terminals.

There should be no continuity between the A and

B terminals when power is disconnected.ProCarManuals.com