jump start terminals Acura NSX 2017 Owner's Guide

158 || 159
HANDLING THE UNEXPECTEDHANDLING THE UNEXPECTED
Jump Starting
Turn off the power to electric devices, such as audio and lights. Turn off the power system, then
open the hood.
1.
Remove

the maintenance cover (see page 183), then slide
the terminal cover on your 12-volt battery’s (+) terminal
2.
Connect the first jumper

cable to your vehicle’s 12-volt
battery (+) terminal.
3.
Connect the other end of the first

jumper cable to the
booster battery (+) terminal. Use a 12-volt booster battery
only.
4.
Connect the second jumper cable to

the booster battery (-)
terminal.
5.
Connect the other end of the second

jumper cable to the
front frame (as shown). Do not connect this jumper cable to
any other part.
Booster Battery
Terminal Cover
A battery can explode if you do not follow the correct procedure, seriously injuring
anyone nearby.
Keep all sparks, open flames, and smoking materials away from the battery.
WARNING
n After the Engine Starts
Once your
vehicle’s engine has started, remove the jumper cables in the following order:
1.
Disconnect the jumper cable from

your vehicle’s ground.
2.
Disconnect the other end of the jumper cable

from the assisting vehicle’s (-) terminal.
3.
Disconnect the jumper cable from

the assisting vehicle’s (+) terminal.
4.
Disconnect the other end of the jumper cable

from your vehicle’s (+) terminal.
Have your vehicle inspected by a nearby service station or an authorized Acura NSX
dealer.
If your vehicle is connected to another vehicle, start the assisting vehicle’s engine and increase
its rpm slightly.
Attempt to start your vehicle’s engine. If it turns over slowly, make sure the jumper cables have
good metal-to-metal contact.
WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds.
Wash your hands after handling.

192 || 193
MAINTENANCEMAINTENANCE
Brake Fluid
The fluid level should be between the MIN and MAX marks on
the side of the reservoir. We recommend using Acura Heavy
Duty Brake Fluid DOT 4.
Pour the fluid carefully.
If the fluid level is at or below the MIN mark, have the vehicle
inspected for leaks or worn brake pads as soon as possible.
MINBrake Reservoir
MAX
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause
extensive damage.
NOTICE
Checking the 12-Volt Battery
Check the battery terminals for corrosion monthly.
Remove the cover by pressing the tabs. Slide the terminal cover
over the (+) terminal.
AGM-labeled batteries can be damaged if improperly charged.
See your authorized Acura NSX dealer for charging information.
Ta bCove r
Terminal Cover
For jump starting, see page 158.