ECO mode ACURA NSX 2020 User Guide

72
uuIndicatorsu
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Automatic Brake Hold System
Indicator•Comes on when the automatic
brake hold system is on.
2 Automatic Brake Hold P. 360
Automatic Brake
Hold Indicator
•Comes on for a few seconds when
you set the power mode to ON, then goes off.
• Comes on when the automatic
brake hold is activated.
2 Automatic Brake Hold P. 360—
U.S.
Canada
20 ACURA NSX PMC-31T6N6300.book 72 ページ ２０１９年９月１１日　水曜日　午後４時５１分

73
uuIndicatorsu
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Brake System Indicator (Amber)
•Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on if there is a problem with
a system related to braking other
than the conventional brake system.
• Comes on if there is a problem with
the cooperative control with
regenerative braking, the electric
servo brake system, or the hill start
assist system.• Comes on while driving - Have your
vehicle checked by an authorized Acura
NSX dealer.
• Stays on constantly - Avoid high speeds
and sudden braking. Take the vehicle to
an authorized Acura NSX dealer
immediately.
• With this indicator on, your vehicle still has
normal braking ability.
U.S.
Canada
(Amber)
U.S.
Canada
20 ACURA NSX PMC-31T6N6300.book 73 ページ ２０１９年９月１１日　水曜日　午後４時５１分

74
uuIndicatorsu
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
POWER
SYSTEM
Indicator
• Comes on for a fe w seconds when
you set the power mode to ON,
then goes off.
• Comes on if there is a problem with the electric vehicle system.• Comes on while driving - Have your
vehicle checked by an authorized Acura
NSX dealer immediately.
READY Indicator
•Comes on when the vehicle is ready to drive.
2 Turning on the Power P. 321
Active Damper System Indicator
•Comes on for a fe w seconds when
you change the power mode to
ON, then goes off.
• Comes on if there is a problem with
the Active Damper System. The
speed of the vehicle will be limited.• Stays on constantly - Have the vehicle
checked by an authorized Acura NSX
dealer. With this indicator on, your vehicle
has normal damping ability without the
active damper feature. 2Integrated Dynamics System P. 336
Brake Wear
Indicator*
•
Comes on for a fe w seconds when
you change the power mode to
ON, then goes off.
• Comes on if a worn brake pad is
detected.• Comes on while driving - The brake
pads may need to be replaced. Have your
vehicle inspected by an authorized Acura
NSX dealer.U.S.
Canada
U.S.
Canada
* Not available on all models
20 ACURA NSX PMC-31T6N6300.book 74 ページ ２０１９年９月１１日　水曜日　午後４時５１分

75
uuIndicatorsu
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Malfunction Indicator Lamp
•Comes on when you set the power
mode to ON, and goes off either
when the power system is on or
after several seconds if the power
system did not turn on. If
“readiness codes” have not been
set, it blinks five times before it goes off.
• Comes on if there is a problem
with the emissions control system.
• Blinks when a misfire in the
engine’s cylinders is detected.• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2Testing of Readiness Codes P. 473
• Comes on while driving - Have your
vehicle checked by an authorized Acura
NSX dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the power system for 10
minutes or more, and wait for it to cool
down. Then, take the vehicle to an
authorized Acura NSX dealer. 2If the Malfunction Indicator Lamp
Comes On or Blinks P. 452
•Comes on if there is a problem
with the gear shift mechanism.• Comes on and gear position indicator
blinks at the same time - Have your
vehicle checked by an authorized Acura
NSX dealer.
12-Volt Battery
Charging System
Indicator
• Comes on when you set the power
mode to ON, and goes off when
the power system is on.
• Comes on when the 12-volt
battery is not charging.• Comes on while driving - Turn off the
climate control system and rear defogger
in order to reduce electricity consumption. 2If the 12-Volt Battery Charging System Indicator Comes On P. 452
20 ACURA NSX PMC-31T6N6300.book 75 ページ ２０１９年９月１１日　水曜日　午後４時５１分

77
uuIndicatorsu
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Seat Belt
Reminder
Indicator
•Comes on and the beeper sounds
if you are not wearing a seat belt
when you set the power mode to ON.
• If the passenger is not wearing a
seat belt, the indicator comes on a
few seconds later.
• Blinks while driving if either you or
the passenger has not fastened a
seat belt. The beeper sounds and
the indicator blinks at regular
intervals.•The beeper stops and the indicator goes off
when you and the passenger fasten their
seat belts.
• Stays on after you or the passenger has
fastened the seat belt - A detection error
may have occurred in the sensor. Have your
vehicle checked by an authorized Acura
NSX dealer. 2Seat Belt Reminder P. 37
Low Fuel Indicator
•Comes on when the fuel reserve is
running low (approximately 2.4
U.S. gal/8.9 Liter left).
• Blinks if there is a problem with the
fuel gauge.•Comes on - Refuel your vehicle as soon as
possible.
• Blinks - Have your vehicle checked by an
authorized Acura NSX dealer.
20 ACURA NSX PMC-31T6N6300.book 77 ページ ２０１９年９月１１日　水曜日　午後４時５１分

78
uuIndicatorsu
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Anti-lock Brake
System (ABS)
Indicator
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• If it comes on at any other time,
there is a problem with the ABS.•Stays on constantly - Have your vehicle
checked by an authorized Acura NSX
dealer. With this indi cator on, your vehicle
still has normal braking ability but no
anti-lock function. 2Anti-lock Brake System (ABS) P. 362
Supplemental
Restraint System
Indicator
•Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on if a problem with any of the following is detected:
- Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Knee airbag system
- Seat belt tensioner• Stays on constantly or does not come
on at all - Have your vehicle checked by
an authorized Acura NSX dealer.
Electric Power
Steering (EPS)
System Indicator
• Comes on when you set the power
mode to ON, and goes off when the
power system is on.
• Comes on if there is a problem with
the EPS system.•Stays on constantly or does not come
on at all - Have your vehicle checked by
an authorized Acura NSX dealer. 2If the Electric Power Steering (EPS)
System Indicator Comes On P. 453
20 ACURA NSX PMC-31T6N6300.book 78 ページ ２０１９年９月１１日　水曜日　午後４時５１分

79
uuIndicatorsu
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Vehicle Stability
AssistTM
(VSA ®)
System Indicator
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Blinks when VSA ® is active.
• Comes on if there is a problem
with the VSA ® system.• Stays on constantly - Have your vehicle
checked by an authorized Acura NSX dealer. 2Vehicle Stability Assist TM
(VSA ®), aka
Electronic Stability Control (ESC),
System P. 346
Vehicle Stability
AssistTM
(VSA ®)
OFF Indicator
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on when you press the
VSA ® OFF button to change VSA ®
mode.
• Comes on when you select TRACK mode by the Integrated
Dynamics System mode switch.
2 VSA ® On and Off P. 347
2 Integrated Dynamics System P. 336
20 ACURA NSX PMC-31T6N6300.book 79 ページ ２０１９年９月１１日　水曜日　午後４時５１分

80
uuIndicatorsu
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Low Tire Pressure/ TPMS Indicator
•Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on if the tire pressure of any
of the tires becomes significantly
low.
• Blinks for about one minute, and
then stays on if there is a problem
with the TPMS.•Comes on while driving - Stop in a safe
place, check tire pres sures, and inflate the
tire(s) if necessary.
• Blinks and remains on - Have your
vehicle checked by an authorized Acura
NSX dealer.
System Message
Indicator
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on along with a beep when
a problem is detected. A system
message on the driver information
interface appears at the same time.•While the indicator is on, roll the right
selector wheel to see the message again.
• Refer to the Indicators information in this
chapter when a system message appears
on the driver information interface. Take
the appropriate action for the message.
• The driver information interface does not return to the normal screen unless the
warning is canceled, or the right selector wheel is rolled.
—
20 ACURA NSX PMC-31T6N6300.book 80 ページ ２０１９年９月１１日　水曜日　午後４時５１分

81
uuIndicatorsu
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Turn Signal and
Hazard Warning
Indicators•Blinks when you operate the turn
signal lever.
• Blink if you press the hazard
warning button.•Does not blink or blinks rapidly - Have
your vehicle checked by an authorized
Acura NSX dealer. 2Replacing Light Bulbs P. 401, 402
—
High Beam
Indicator•Comes on when the high beam
headlights are on.——
Lights On Indicator
•Comes on whenever the light
switch is on, or in AUTO when
the exterior lights are on.• If you set the power mode to VEHICLE OFF
while the exterior lights are on, a chime
sounds when the driver’s door is opened.
—
Immobilizer
System Indicator
•Comes on briefly when you set
the power mode to ON, then goes off.
• Comes on if the immobilizer
system cannot recognize the key information.•Blinks - You cannot start the power
system. Set the power mode to VEHICLE
OFF, then select the ON mode again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle checked
by an authorized Acura NSX dealer.
• Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
—
20 ACURA NSX PMC-31T6N6300.book 81 ページ ２０１９年９月１１日　水曜日　午後４時５１分

82
uuIndicatorsu
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Security System Alarm Indicator
•Blinks when the security system
alarm has been set.
2 Security System Alarm P. 122—
Keyless Access
System Indicator
•Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on as soon as a problem is
detected in the keyless access
system or keyless starting system.• Have your vehicle checked by an
authorized Acura NSX dealer.
CRUISE MAIN
Indicator• Comes on when you press the
CRUISE button.2Cruise Control P. 343—
CRUISE
CONTROL
Indicator• Comes on if you have set a speed
for cruise control.
2 Cruise Control P. 343—
Indicator
20 ACURA NSX PMC-31T6N6300.book 82 ページ ２０１９年９月１１日　水曜日　午後４時５１分