seat memory Acura RDX 2013 Advanced Technology Guide

9
\f0
\f\f
H o w I t W o r k s
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
\f.
Turn the vehicle on. Shiftinto
Park (P).3. Press SET. You will hear a
beep.
2. Adjust your preferred seat and
outside mirror settings.4. Press the memory button
corresponding to the remote
(\f or 2) you are using. You will
hear two beeps.
Note: Each group of settings is activated by the corresponding remote
transmitter (\f or 2) when it is used to unlock the doors. When activated, each
item begins to adjust when you open the driver’s door to enter the vehicle.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R), either door mirror can be tilted downward to improve
your view as you parallel park. Shifting out of Reverse returns the tilted mirror to its
original position.
• To tilt the driver’s door
mirror, pushthe mirror
selector switch to the left
(L) position when in
Reverse.
• To tilt the passenger’s door mirror, pushthe
mirror selector switch to
the right (R) position
when in Reverse.
• To turn the feature off, push the switch to the
middle position.
M U L T I V I E W R E A R C A M E R A
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
H o w I t W o r k s
A d j u s t i n g t h e V i e w
Press and hold CANCEL for
about 3 seconds. If the guide
lines are turned off, they remain
off until turned on again.
T u r n i n g t h e G u i d e L i n e s
O n o r O f fS w i t c h i n g V i e w s
There are three rearview modes:
wide, normal, and top down.
• Press ENTER to toggle between
views.
• Rotate the Interface Dial to
adjust the screen brightness.
Normal Top downWide
• When you shift into Reverse (R), a real\btime
image of the area behind your vehicle is shown
in the navigation display.
• Yellow parking guide lines also appear to help you judge distance.
• The rearview display turns off when you shift out of Reverse.
Normal Top downWide
Store up to two driver’s seat and mirror positions into memory, which are activated by
the corresponding remote transmitters.
13 RDX ATG_Tech\fATG_NEW STYLE 3/1\b/2012 11\f08 AM Page 7