fuse box diagram Acura RL 2001 3.5 Owner's Manual

Fuses
Checking and Replacing Fuses

If something electrical in your car
stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on pages 294 and 295 , or the diagram on the
fuse box lid, which fuse or fuses control that component. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is not the cause. Replace any blown
fuses and check the component's
operation.

1. Turn the ignition switch to LOCK (0). Make sure the headlights and
all other accessories are off.
2. Remove the cover from the fuse box. FUSE

3. Check each of the large fuses in
the under-hood fuse box by

looking through the top at the wire

inside. Removing these fuses

requires a Phillips-head screw-

driver.
4. Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse box by pulling out each fuse with the fuse
puller provided in the door of theinterior fuse box.
Taking Care of the Unexpected BLOWN
FUSE

PULLER