check engine light Acura RLX HYBRID 2018 Owner's Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2018, Model line: RLX HYBRID, Model: Acura RLX HYBRID 2018Pages: 609, PDF Size: 48.11 MB
Page 28 of 609

27
Quick Reference Guide
Maintenance (P 493)
Under the Hood (P 502)
● Check engine oil, engine coolant, and inverter coolant. Add 
when necessary.
● Check brake fluid.
● Check the 12-volt battery condition monthly.
aPull the hood release handle under the corner of the 
dashboard.
bLocate the hood latch lever,  push it to the side, and then 
raise the hood. Once you have raised the hood slightly, you 
can release the lever.
cWhen finished, close the hood  and make sure it is firmly 
locked in place.
Lights (P 515)
● Inspect all lights regularly.
Wiper Blades (P 518)
● Replace blades if they leave streaks 
across the windshield.
Tires (P 521)
● Inspect tires and  wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter driving.
18 ACURA RLX E-AWD-31TY36400.book  27 ページ  2017年7月20日 木曜日 午後6時8分 
Page 375 of 609

374
Driving
Before Driving
Driving Preparation
Check the following items before you start driving.
• Make sure there are no obstructions on th e windows, door mirrors, exterior 
lights, or other parts of the vehicle.
u Remove any frost, snow, or ice.
u Remove any snow on the roof, as this can slip down and obstruct your field of 
vision while driving. If frozen solid , remove ice once it has softened.
u When removing ice from around the wheel s, be sure not to damage the wheel 
or wheel components.
• Make sure the hood is securely closed.
u If the hood opens while driving, your front view will be blocked.
• Make sure the tires are in good condition.
u Check air pressures, and check  for damage and excessive wear.
2Checking and Maintaining Tires  P. 521
•Make sure there are no people or ob jects behind or around the vehicle.
u There are blind spots from the inside.
■Exterior Checks1Exterior Checks
NOTICE
When doors are frozen s hut, use warm water around 
the door edges to melt any ice. Do not try to force 
them open, as this can damage the rubber trim 
around the doors. When done, wipe dry to avoid 
further freezing.
Do not pour warm water  into the key cylinder.
You will be unable to insert the key if the water 
freezes in the hole.
Heat from the engine  and exhaust can ignite 
flammable material s left under the hood, causing a 
fire. If you’ve parked y our vehicle for an extended 
period, inspect and remove  any debris that may have 
collected, such as dried grass and leaves that have 
fallen or have been carried  in for use as a nest by a 
small animal. Also check under the hood for leftover 
flammable materials after  you or someone else has 
performed maintenance on your vehicle.
18 ACURA RLX E-AWD-31TY36400.book  374 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 381 of 609

380
Driving
When Driving
Turning on the Power
1.Make sure the parking brake is applied.
u The electric parking brake indicator 
comes on for 15 seconds when you pull 
up the electric parking brake switch.
2. Depress the brake pedal.1Turning on the Power
Keep your foot firmly on the brake pedal when 
starting the power system.
The engine is harder to st art in cold weather and in 
thinner air found at altitudes above 8,000 feet (2,400 
meters).
When turning on the power system in cold weather, 
turn off all electrical accessories such as the lights, 
climate control system, and  rear defogger in order to 
reduce 12-volt battery drain.
If you live in a region where winter is extremely cold, 
an engine block heater  and transmission clutch 
actuator heater will impr ove starting and reduce the 
warming time required befo re driving. Consult a 
dealer for details.
If the exhaust system sounds abnormal or you can 
smell exhaust gas inside the  vehicle, have your vehicle 
checked by a dealer. There may be a problem with 
the engine or exhaust system.
Electric Parking 
Brake Switch
Brake Pedal
18 ACURA RLX E-AWD-31TY36400.book  380 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 390 of 609

Continued389
uuWhen Driving uShifting
Driving
■Shift Operation1Shift Operation
NOTICE
When you change (D to (R and vice versa, come to 
a complete stop and keep  the brake pedal depressed.
Operating the shift button before the vehicle has 
come to a complete standstill can damage the 
transmission.
Use the gear position indicator and the shift button 
indicator to check the gear  position before selecting 
a shift button.
If the indicator of the curren tly selected gear position, 
or all the gear position  indicators are blinking 
simultaneously, there is a problem with the 
transmission.
Avoid sudden acceleration  and have the transmission 
checked by a dealer as soon as possible.
The fuel supply may be cut of f if you drive at engine 
speeds in or over the tac hometer’s red zone (engine 
speed limit). If this happe ns, you may experience a 
slight jolt.
When the engine speed is increased while the 
transmission is in 
( N, (P or (R, the fuel supply may 
be cut off even without  the engine speed entering 
the tachometer’s red zone.
The beeper sounds once when you change to 
( R.
2 Customized Features  P. 297
Gear Position Indicator
Tachometer’s red zone
Press the (P button.
Press back the ( R button.
Press the 
( N button.
Press the 
( D button.
Shift Button 
Indicator
M  (sequential mode) 
Indicator
Sequential Mode Gear 
Selection Indicator
18 ACURA RLX E-AWD-31TY36400.book  389 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 459 of 609

458
uuBraking uAnti-lock Brake System (ABS)
Driving
Anti-lock Brake System (ABS)
Helps prevent the wheels from locking up, an d helps you retain steering control by 
pumping the brakes rapidly, much faster than you.
The electronic brake distribution (EBD) system, which is part of the ABS, also 
balances the front-to-rear braking distri bution according to vehicle loading.
You should never pump the brake pedal.  Let the ABS work for you by always 
keeping firm, steady pressure on the brake pe dal. This is sometimes referred to as 
“stomp and steer.”
■ABS operation
The brake pedal may pulsate slightly when  the ABS is working. Keep holding the 
pedal firmly down. On dry pavement, you will need to press on the brake pedal very 
hard before the ABS activates. However,  you may feel the ABS activate immediately 
if you are trying to stop on snow or ice.
ABS may activate when you depress  the brake pedal when driving on:
• Wet or snow covered roads.
• Roads paved with stone.
• Roads with uneven surfaces, such as potholes, cracks, manholes, etc.
When the vehicle speed goes unde r 6 mph (10 km/h), the ABS stops.
■ABS1Anti-lock Brake System (ABS)
NOTICE
The ABS may not function correc tly if you use a tire of 
the wrong size or type.
If the ABS  indicator comes on while driving, there 
may be a problem with the system.
While normal braking will not  be affected, there is a 
possibility that the ABS will  not operating. Have your 
vehicle checked by a dealer immediately.
The ABS is not designed  for the purpose of reducing 
the time or distance it takes for a vehicle to stop: It is 
designed to limit brake lo ckup which can lead to 
skidding and loss of steering control.
In the following cases, yo ur vehicle may need more 
distance to stop than a vehicle without the ABS:
•You are driving on rough or uneven road surfaces, 
such as gravel or snow.
•The tires are equipped  with snow chains.
The following may be observed with the ABS system:
•Motor sounds coming from the engine 
compartment when the brakes are applied, or 
when system checks are being performed after the 
engine has been  started and while vehicle is 
accelerates.
•Brake pedal and/or the ve hicle body vibration when 
ABS activates.
These vibrations and sou nds are normal to ABS 
systems and are no cause for concern.
18 ACURA RLX E-AWD-31TY36400.book  458 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 494 of 609

493
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 494
Safety When Performing Maintenance .... 495Parts and Fluids Used in Maintenance Service ........................................... 496
Maintenance Minder
TM..................... 497
Maintenance Under the Hood
Maintenance Items Un der the Hood .... 502Opening the Hood ........................... 503
Engine Compartment Cover ............. 504
Recommended Engine Oil ................ 505
Oil Check ......................................... 506
Adding Engine Oil ............................ 507
Changing the Engine Oil and Oil Filter ..... 508Cooling System ................................ 510
Inverter Coolant ............................... 512
Transmission Fluid ............................ 513
Brake Fluid ....................................... 513
Refilling Window Washer Fluid......... 514
Replacing Light Bulbs ....................... 515
Checking and Maintaining Wiper Blades.... 518Checking and Maintaining Tires
Checking Tires ................................. 521
Tire and Loading Information Label .. 522
Tire Labeling .................................... 522
DOT Tire Quality Grading (U.S. Vehicles).. 524
Wear Indicators ............................... 526
Tire Service Life ................................ 526
Tire and Wheel Replacement ........... 527
Tire Rotation .................................... 528
Winter Tires ..................................... 529
12-Volt Battery ................................. 530
Remote Transmitter Care Replacing the Button Battery ........... 531
Climate Control System Maintenance.... 532CleaningInterior Care .................................... 533
Exterior Care.................................... 535
Accessories and Modifications ........ 538
18 ACURA RLX E-AWD-31TY36400.book  493 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 509 of 609

508
uuMaintenance Under the Hood uChanging the Engine Oil and Oil Filter
Maintenance
Changing the Engine Oil and Oil Filter
You must change the engine oil and oil filter regularly in order to maintain the 
engine’s lubrication. The engine may be  damaged if they are not changed regularly.
Turning the power system on automaticall y starts the engine if the following 
conditions are met:
• The SPORT mode is on.
2 SPORT Mode P. 395
Change the oil and filter in  accordance with the maintenance message on the multi-
information display. 1.Run the engine until it reaches normal 
operating temperature, and then turn the 
engine off.
2. Open the hood and remove the engine oil 
fill cap.
3. Remove the drain bolt and washer from 
the bottom of the engine, and drain the 
oil into a suitable container.
4. Remove the oil filter and dispose of the 
remaining oil.
5. Check that the filter ga sket is not stuck to 
the engine contact surface.
u If it is stuck, you must detach it.
6. Wipe away dirt and dust adhering to the 
contact surface of the engine block, and 
install a new oil filter.
u Apply a light coat of new engine oil to 
the filter gasket.
1Changing the Engine Oil and Oil Filter
NOTICE
You may damage the environment if you do not 
dispose of the oil in a suitable way. If you are 
changing the oil by yourself , appropriately dispose of 
the used oil. Put the oil in a sealed container and take 
it to a recycling center. Do not throw the oil away 
into a garbage can or onto the ground.
You will need a special wrench to replace the oil 
filter. You can buy this wrench from a dealer.
When installing the new oil filter, follow the 
instructions supplied with the oil filter.
Reinstall the engine oil fill  cap. Start the engine. The 
low oil pressure indicator should go off within five 
seconds. If it does not, turn  off the engine, and check 
your work.
Drain Bolt
Washer
Oil Filter
18 ACURA RLX E-AWD-31TY36400.book  508 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 565 of 609

564
Handling the Unexpected
Jump Starting
Turn off the power to electric devices, such as audio and lights. Turn off the power 
system, then open the hood.1.Open the fuse box cover on your vehicle’s 
12-volt battery positive  + terminal.
2. Connect the first jump er cable to your 
vehicle’s 12-volt battery  + terminal.
3. Connect the other end of the first jumper 
cable to the booster battery  + terminal.
u If you use a booster battery, only use a 
12-volt booster battery.
u When using an automotive battery 
charger, select a charging voltage lower 
than 15-volts. Check the charger manual 
for the proper setting.
4. Connect the second jumper cable to the 
booster battery  - terminal.
■Jump Starting Procedure1Jump Starting
Securely attach the jumper cable clips so that they do 
not come off when the engine vibrates. Also be 
careful not to tangle the ju mper cables or allow the 
cable ends to touch each other while attaching or 
detaching the jumper cables.
Battery performance degrades  in cold conditions and 
may prevent the engi ne from starting.
3WARNING
A 12-volt battery can explode if you do not 
follow the correct procedure, seriously 
injuring anyone nearby.
Keep all sparks, open flames, and smoking 
materials away from the 12-volt battery.
Booster Battery
18 ACURA RLX E-AWD-31TY36400.book  564 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 566 of 609

565
uuJump Starting u
Continued
Handling the Unexpected
5.Connect the other end of the second 
jumper cable to the engine hanger as 
shown. Do not connect this jumper cable to 
any other part.
6. If your vehicle is connected to another 
vehicle, start the assisting vehicle’s engine 
and increase its rpm slightly.
7. Attempt to start your ve hicle’s engine. If it 
turns over slowly, check that the jumper 
cables have good metal-to-metal contact.
18 ACURA RLX E-AWD-31TY36400.book  565 ページ  2017年7月20日 木曜日 午後6時 8分 
Page 570 of 609

569
Handling the Unexpected
Indicator, Coming On/Blinking
If the Low Oil Pressure Indicator Comes On
■Reasons for the indicator to come on
Comes on when the engine oil pressure is low.
■What to do as soon as  the indicator comes on
1. Immediately park the vehicle on level ground in a safe place.
2. If necessary, turn the hazard warning lights on.
■What to do after  parking the vehicle
1. Turn the power system off and let it sit for about three minutes.
2. Open the hood and check the oil level.
2 Oil Check P. 506
3.Turn the power system on and chec k the low oil pressure indicator.
u The indicator goes off: Start driving again.
u The indicator does not go off wi thin 10 seconds: Turn the power 
system off and contact a dealer for repairs immediately.
If the 12-Volt Battery Cha rging System Indicator 
Comes On
■Reasons for the indicator to come on
Comes on when the 12-volt battery is not being charged.
■What to do when th e indicator comes on
Turn off the climate control system,  rear defogger, and other electrical 
systems, and immediately co ntact a dealer for repairs.
1If the Low Oil Pressure Indicator Comes On
NOTICE
Running the engine with low oil pressure can cause 
serious mechanical damage almost immediately.
1If the 12-Volt Battery Chargi ng System Indicator Comes On
If you need to stop temporarily, do not turn off the 
power system. Restarting  the power system may 
rapidly discharge the battery.
18 ACURA RLX E-AWD-31TY36400.book  569 ページ  2017年7月20日 木曜日 午後6時 8分