Acura RLX HYBRID 2020 Owners Manual

90
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Adaptive Cruise
Control (ACC )
with Low Speed
Follow Indicator
(Amber)
• Comes on for a few seconds when
you set the power mode to ON, then
goes off.
• Comes on if there is a problem with
ACC with Low Speed Follow.• Comes on while driving - Have your
vehicle checked by a dealer.
• Comes on if anything covers the
radar sensor cover and prevents the
sensor from detecting a vehicle in
front.
• May come on when driving in bad
weather (rain, snow, fog, etc.)
• ACC with Low Speed Follow has
been automatically canceled.•When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
• Have your vehicle checked by a dealer if the
indicator does not go off even after you
clean the sensor cover.
Adaptive Cruise
Control (ACC )
with Low Speed
Follow Indicator
(Green)• Comes on when you press the MAIN
button.
2 Adaptive Cruise Control (ACC) with
Low Speed Follow P. 402—
20 ACURA RLX HYBRID-31TY36601.book 90 ページ ２０１９年７月２３日　火曜日　午後６時２５分

91
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Lane Keeping
Assist System
(LKAS ) Indicator
(Amber)• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Comes on if there is a problem with
the LKAS.•Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
( LKAS ) Indicator
(Green)• Comes on when you press the MAIN
button.2 Lane Keeping Assist System (LKAS)
P. 421
2 Traffic Jam Assist P. 428
—
20 ACURA RLX HYBRID-31TY36601.book 91 ページ ２０１９年７月２３日　火曜日　午後６時２５分

92
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Blind spot
information
System Indicator
•Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Stays on while the blind spot
information system is turned off.
—
•Comes on when mud, snow, or ice
accumulates in the vicinity of sensor.•Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information System P. 443
•Comes on if there is a problem with
the system.• Comes on while driving - Have your
vehicle checked by a dealer.
Collision
Mitigation
Braking System
TM
(CMBSTM)
Indicator
• Comes on for a few seconds when
you change the power mode to ON,
then goes off.
• Comes on when you deactivate the
CMBS
TM. A multi-information display
message appears for five seconds.
• Comes on if there is a problem with
the CMBS
TM.
• Stays on constant ly without the
CMBSTM off - Have your vehicle checked by
a dealer.
2 Collision Mitigation Braking SystemTM
(CMBSTM) P. 458
20 ACURA RLX HYBRID-31TY36601.book 92 ページ ２０１９年７月２３日　火曜日　午後６時２５分

93
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Collision
Mitigation
Braking System
TM
(CMBSTM)
Indicator
• Comes on when the CMBSTM shuts
itself off.• Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
2 Front Sensor Camera P. 400
•When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
• Have your vehicle checked by a dealer if the
indicator does not go off even after you
clean the sensor cover.
2 Collision Mitigation Braking SystemTM
(CMBSTM) P. 458
• Stays on - The temperature inside the
camera is too high. Use the climate control
system to cool do wn the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 400
20 ACURA RLX HYBRID-31TY36601.book 93 ページ ２０１９年７月２３日　火曜日　午後６時２５分

94
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
Multi-Information Display Warn ing and Information Messages
The following messages appear only on the mu lti-information display. Roll the right selector wheel to see the message again with the
system message indicator on.
MessageConditionExplanation
• Appears when the vehicle is no longer able to run due
to its malfunction.• Immediately stop in a safe place.
• Have your vehicle checked by a dealer immediately.
•Appears if you cannot select (P due to a malfunction.• While the vehicle is stopped, apply the parking brake.
• Depending on the circumstances, you can set the
power system to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along
with the Warning Message P. 571
•Have your vehicle checked by a dealer.
•Appears if the transmission is in a position other than
(N and a malfunction is preventing the system from
starting.
• Depending on the circumstances, you can set the
power system to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along
with the Warning Message P. 571
•Have your vehicle checked by a dealer.
•Appears when you set the power mode to ON again
and the vehicle is able to run.
2 Turning on the Power P. 378
20 ACURA RLX HYBRID-31TY36601.book 94 ページ ２０１９年７月２３日　火曜日　午後６時２５分

95
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
• Appears when the washer fluid is low.•Refill the washer fluid.
2 Refilling Window Washer Fluid P. 513
•Appears if there is a problem with e-pretensioner
system.•Have your vehicle checked by a dealer.
•Appears when the scheduled maintenance is due soon.
• Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2Maintenance Minder Messages on the Multi-
Information Display P. 497
•Appears if the temperature of the transmission is too
high and the vehicle cannot drive normally.•It may be difficult to accelerate or start uphill.
• Immediately stop in a safe place.
• Until the message goes off, al low the engine to idle so
that the transmission can cool down.
• Immediately after the message goes off, have your
vehicle checked by a dealer.
•Appears when you attempt to change to another gear
position with the transmission in
(P and the power
system OFF.
• To select another gear position while in (P, the power
system must be ON.
20 ACURA RLX HYBRID-31TY36601.book 95 ページ ２０１９年７月２３日　火曜日　午後６時２５分

96
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears if there is a problem with transmission and it is
not possible to select
(R.
•Have your vehicle checked by a dealer.
•Appears if you depress the accelerator pedal when the
transmission is in
(N.
•Release the accelerator peda l. After that, depress the
brake pedal and change the transmission position.
• Appears when you press and hold the (N button for
more than two seconds.• Disappears when you set the gear position to other
than
(N.
2 If you want to keep the transmission in (N
position (car wash mode) P. 389
• Appears when you change to (N, then release the (N
button.
2 If you want to keep the transmission in (N
position (car wash mode) P. 389
• All gear positions come on when the transmission is
operated.•Acceleration is not possible while the indicator is on.
• Goes off a few seconds late r if there is no problem.
• After the indicator goes off, you can drive normally.
20 ACURA RLX HYBRID-31TY36601.book 96 ページ ２０１９年７月２３日　火曜日　午後６時２５分

97
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
• Appears when there is a pr oblem with the sensor on
the 12-volt battery.• Have your vehicle checked by a dealer.
2 Checking the 12-Volt Battery P. 529
•Appears when the starter system has a problem.•As a temporary measure, press and hold the POWER
button for up to 15 seconds while depressing the brake
pedal and manually turn on the power system.
Have your vehicle checked by a dealer.
• Appears after the driver’s door is opened when the
power mode is in ACCESSORY.•Change the power mode to VEHICLE OFF.
2 POWER Button P. 152
•Appears when the power mode is in ACCESSORY.
—
U.S.
Canada
20 ACURA RLX HYBRID-31TY36601.book 97 ページ ２０１９年７月２３日　火曜日　午後６時２５分

98
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when you close the door with the power mode
in ON without the keyless access remote inside the
vehicle.• Disappears when you bring the keyless access remote
back inside the vehicle and close the door.
2 Keyless Access Remote Reminder P. 154
•Appears when the keyless access remote battery
becomes weak.•Replace the battery as soon as possible.
2 Replacing the Button Battery P. 530
•Appears if the keyless access remote battery is too weak
to turn on the po wer system or the key is not within
operating range to turn on the power system.
A beeper sounds six times.• Bring the keyless access remote in front of the POWER
button to be touched with.
2 If the Keyless Access Remote Battery is Weak P. 560
•Appears three seconds after you bring the keyless
access remote in front of the POWER button when To
Start, Hold Remote Near Start Button appears. To
Start Vehicle: Brake + Push appears sequentially.•Unless you bring the keyless access remote in front of
the POWER button, this message does not appear.
2If the Keyless Access Remote Battery is Weak P. 560
•Appears when you set the power mode to ACCESSORY
or ON.
2 Turning on the Power P. 378
•Appears if you press the POWER button while the
vehicle is moving.
2 Emergency Power System Off P. 561
20 ACURA RLX HYBRID-31TY36601.book 98 ページ ２０１９年７月２３日　火曜日　午後６時２５分

99
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
• Appears when you set the power mode to ON without
fastening the driver’s seat belt.
• Appears when you change the gear position after
(P
has been automatically selected with the driver’s door
open, the driver’s seat belt unfastened, then the brake
pedal is released.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 387
•Appears when you try to change the gear position
without depressing the brake pedal.•Depress the brake pedal, then select a shift button.
•Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.•Release your foot off the acce lerator pedal, then select
a shift button.
• Appears when the parking button is pressed while the
vehicle is moving.
• Appears if you change the gear position to
(R while the
vehicle is moving forward, or to
(D while the vehicle is
reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
20 ACURA RLX HYBRID-31TY36601.book 99 ページ ２０１９年７月２３日　火曜日　午後６時２５分