display Acura TL 2009 Owner's Manual

»¼
ÎÎ
Follow the prompts on your phone
to get it into its discovery mode.
The phone will search f or HFL.
When it comes up, select
HandsFreeLink f rom the list of
options displayed on your phone.
When asked by the phone, enter
the four-digit code from step 3 into
your phone.
HFL responds ‘‘HandsFreeLink
has connected to a new phone. A
name is needed to identif y this
phone. Press the Talk button and
say a name. For example, John’s
phone.’’
Steps 4 and 5 show a
common way to get your phone into
its discovery mode (searching f or a
Bluetooth related device). If these
steps do not work on your phone,
ref er to the phone’s operating
manual.
Press and release the Talk button.
Af ter the beep, if you say No, HFL
responds ‘‘Would you like to hear
the Bluetooth HandsFreeLink
tutorial now? Press the Talk
button and af ter the beep, say yes
to begin the tutorial, or say No to
exit HandsFreeLink.’’
If you say Yes, HFL will begin the
tutorial. Follow the prompts on
HFL.
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ HFL
responds ‘‘Entering phone set up:
pair menu. The pairing process
requires operation of your
Bluetooth phone. For saf ety, only
perf orm this f unction while the
vehicle is stopped.’’
HFL responds ‘‘For proper system
f unction a compatible Bluetooth
phone is required. Please visit the
HandsFreeLink
website, listed in
the owner’s manual, f or a list of
approved phones and other system
inf ormation. HandsFreeLink is
waiting to pair with a Bluetooth
phone. From your phone, search
f or Bluetooth devices and select
HandsFreeLink.’’
HFL responds ‘‘When prompted
by your mobile phone, enter the
pairing code: 1234 .’’
Go to Step 4. 3.
4.
5.
2.
: For example
CONT INUED
BluetoothHandsFreeL ink(Models without navigation system)
Features
399
NOTE:
\f—\f—y
y
) \f\fy\f\fy
2009 TL

HFLresponds‘‘1,2,3,4.Isthis
correct? Press the Talk button and
say Yes or No.’’Press and release the Talk button.
Af ter the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notif ication, auto
transf er, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
After the beep, say ‘‘Call
notification.’’
HFL responds: ‘‘Would you like
the incoming call notif ication to be
a ring tone, a prompt, or of f ?’’
Press and release the Talk button.
Af ter the beep, f or example, say
‘‘Ring tone.’’
HFL responds ‘‘A ring tone will be
used.’’ You will hear a ring tone
through the audio speakers to
announce an incoming call.If you say, ‘‘Prompt.’’ HFL responds
‘‘An incoming call prompt will be
used.’’ You will hear a ‘‘You have an
incoming call.’’ prompt when
receiving an incoming call.
If you say, ‘‘Of f ,’’ no audible
notif ication of an incoming call will
be selected. During an incoming call,
thereisnoringtoneorprompt
playback. The audio system will still
mute, and the HFL message or the
HFL notif ication screen will be
displayed.
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
HFL responds ‘‘Security passcode
has been changed.’’
2.
1.
5.
3.
4.To set the incoming notif ication, do this:
BluetoothHandsFreeL ink(Models without navigation system)
406
\f—\f—y
\fy
) \f\fy\f

y
2009 TL

Your vehicle’s HFL system allows
you to import your cellular
phonebook to HFL. Using the
navigation system, you can make a
call directly and store a desired
number in HFL f rom the list shown
on the navigation display. For more
inf ormation on how to import the
phonebook, see page . To make
a call, see page .Your phone may not have
phonebook import f unction. Visit ,orcall
HandsFreeLink
consumer support
at (888) 528-7876. In Canada, visit , or call (888) 9-ACURA-
9. You can also see your phone’s
owner’s manual f or inf ormation. The HFL microphone is on the
ceiling, in f ront of the map lights.
The microphone is shared with the
navigation system.
HFL is operable by interaction with
the navigation screen with the
Interface Dial, the HFL buttons on
the steering wheel, or by voice.
When HFL is in use, the sound
comes through the vehicle’s f ront
audio system speakers. If the audio
system is in use while operating
either of the HFL buttons or making
a call, HFL overrides the audio
system. To change the volume level,
use the audio system volume knob or
the steering wheel volume controls.
455
433
www.acura.com/handsfree link
www.acura.ca
How to Use HFL
Phonebook Microphone
A udio System A ll phones may notoperate identically, and some
may cause inconsistent operation
of HFL .
BluetoothHandsFreeL ink(Models with navigation system)
Features
421
NOTE: NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL

HFL system f unctions can be
accessed using the interf ace dial.
The interf ace dial has two parts, a
dial and a selector.The selector can be pushed lef t,
right, up, down, and in. Use the
selector to scroll through lists, to
select menus, and to highlight menu
items. When you make a selection,
push the center of the selector
(ENTER)togotothatselection.
The CANCEL button clears the
current screen and returns to the
previous display.If you receive a call and you are on
the Cellular Phone screen, the
f ollowing screen is displayed:
The dial turns lef t and right. Use it to
make selections f rom a list or menu
on the screen.
The INFO button takes you to the
inf ormation menu, where you can
select the Cellular Phone screen.
You can also press the PICK-UP
buttononthesteeringwheeltogo
directly to the Cellular Phone screen. If this is not displayed, press the
INFO button, select Cellular Phone,
then press ENTER to display the
Cellular Phone screen. You can also
pressthePICK-UPbuttononthe
steering wheel to go directly to the
Cellular Phone screen.
Interf ace Dial
HFL Display
BluetoothHandsFreeL ink(Models with navigation system)
422
ENTER
SELECTOR INFO BUTTON
CANCEL
BUTTON
CALLER NAME
PHONE DIALING
ROAM STATUS
BLUETOOTH INDICATOR
DIAL BATTERY LEVEL
STATUS
SIGNAL STRENGTH
\f—
—y
\f
\f\fy
) \f\fy\fy
2009 TL

ÎÎ
ε
µ
µ
µ Î
ROAM Status Indicates your
phone is roaming.
Battery Level Status Indicates
the power currently remaining in
your phone’s battery. Five bars
equals f ull battery strength.
Signal Strength Indicates the
network signal strength of the
current phone. Five bars equals
f ull strength.
Caller name/Phone dialing
Indicates the number you dialed or
received, and a caller or receiver
name. Only the number will be
displayed if the caller or receiver’s
inf ormation has not been stored in
the phonebook. Some phones do not send this
inf ormation to HFL.
‘‘ ’’ indicator will be displayed on
the navigation display and center
display if your phone is linked to the
HFL system.
When you receive a phone call, a
pop-up will interrupt the display as
shown. This pop-up shows a caller
name and the phone number that has been stored in the phonebook
(see page ). While the system
searches f or inf ormation f rom the
stored data, ‘‘Now acquiring call
inf ormation’’ will be displayed. If the
caller chooses to hide the number
when making a call, ‘‘No Caller ID’’
will be displayed instead.
When you are operating HFL, or
dialing or receiving calls with the
audio system in use, you will see the
above screen.
You can also see the signal strength
and ROAM status on the center
display. :
455
BluetoothHandsFreeL ink(Models with navigation system)
Incoming Call Display
Features
423
U.S. model is shown.
\f—
—y
\f

\fy
) \f\fy\fy
2009 TL

To operate HFL, use the Pick-Up and
Hang-Up buttons on the lef t side of
the steering wheel.Here are some guidelines f or using
voice control:
Adjust the airflow from both the
dashboard and side vents so they
do not blow against the
microphone on the ceiling.
Close the windows and the
moonroof .
HANG-UP Button: This button is
used to end a call.
PICK-UP Button: This button is used
to answer incoming calls or to make
outgoing calls. You can also go
directly to the Cellular Phone screen
by pressing this button.
BACK Button: This button has the
same function as the CANCEL
button. When you press and release
it, the current voice command is
canceled and the display returns to
the previous screen.
The HFL buttons are used as
f ollows:
TALK Button: This button activates
the voice control system and is used
f or all voice commands. Press and
release it, wait f or a beep, and give a
voice command.
If you use the voice commands to
operate HFL, also use the TALK and
BACK buttons. When voice commands are used,
the fan speed will be automatically
adjusted to low. However, for
better voice recognition, lowering
the f an speed may be necessary.
To enter a command, press and
release the Talk button. After the
beep, say your command in a clear,
natural tone.
HFL Buttons
Using Voice Control
BluetoothHandsFreeL ink(Models with navigation system)
424
BACK BUTTONHANG-UP
BUTTON
TALK
BUTTON PICK-UP BUTTON
\f—\f—y
\fy
) \f\fy\fy
2009 TL

µThe navigation system can
manage up to six phones. If you
attempt to pair a seventh phone, a
screen message will appear,
prompting you to delete one of your
existing phones.
The notif ication is displayed. If OK,
press ENTER. Then the message
‘‘Now your phone is ready f or
hands-free calls’’ appears. If you
want to pair two or more phones,
repeat steps 2 4.
If you want to cancel the
pairing process at this point, press
ENTER to select ‘‘Cancel,’’ or press
the Talk button and say ‘‘Cancel.’’
When the pass-key is transf erred
to HFL, it recognizes and pairs
your cell phone. HFL
automatically attempts to connect
to your cell phone that has just
been paired.
5.
6.
BluetoothHandsFreeL ink(Models with navigation system)
428
NOTE:
NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL

Rotate the dial to select ‘‘Pass-key’’
and press ENTER, or press the
Talk button and say ‘‘Pass-key.’’
HFL responds ‘‘Would you like to
setup a random or f ixed Pass-
key?’’
Select the Cellular Phone screen,
then move the interface selector
down. Rotate the dial to select
‘‘Setup Bluetooth Phone’’ and
press ENTER, or press the Talk
button and say ‘‘Setup Bluetooth
Phone.’’ HFL responds ‘‘Please
select a Bluetooth Phone item to
setup.’’
Rotate the interface dial to select
‘‘Yes’’ and press ENTER, or press
the Talk button and say ‘‘Yes.’’ The
display changes to the deleting
procedure. To delete a phone, see
page . When the phone is
deleted, you can pair the seventh
(now sixth) phone to the system.
HFL uses a Bluetooth pass-key to
pair a cellular phone. By def ault, the
system generates and uses a random
pass-key f or any Bluetooth
connection. You can change this
setting to the fixed pass-key. Do the
f ollowing.
1.
2.
431
CONT INUED
Specif ying t he Bluet oot hPass-key
BluetoothHandsFreeL ink(Models with navigation system)
Features
429
——y
y
) yy
2009 TL

You can change to another phone
when there are multiple paired
phones.ActivatetheDiscoverymodeof
the Bluetooth-compatible phone
you would like to link.
Press the INFO button, rotate the
dial to select ‘‘Cellular Phone,’’ and
press ENTER, or press the Talk
button and say ‘‘Cellular Phone.’’
HFL responds ‘‘Which cellular
phone item would you like to
select?’’
The above screen is displayed.
Rotate the dial to select ‘‘Yes’’ and
press ENTER, or press the Talk
button and say ‘‘Yes.’’
4. 1.
2.
To change f rom the currently linkedphone to another paired phone
BluetoothHandsFreeL ink(Models with navigation system)
432
\f—\f—y

\fy
) \f\fy\fy
2009 TL

Move the interf ace selector down
to select the ‘‘Phone setup’’ screen,
or press the Talk button and say
‘‘Phone setup.’’ HFL responds
‘‘Please select the phone setup
item.’’
Rotate the dial to select ‘‘Search
for next phone’’ and press ENTER,
or press the Talk button and say
‘‘Search f or next phone.’’HFL attempts to connect with
another paired phone, and the
message ‘‘Searching f or a Bluetooth
phone’’ appears.
If the above screen is displayed,
pairing has f inished. You can make calls using any phone
number or by using a name in the
HFL phonebook. You can also redial
f rom an incoming or outgoing
number. During a call, HFL allows
youtotalkupto30minutesafteryou
set the power mode to VEHICLE
OFF (LOCK). Continuing a call
without running the engine may
discharge and weaken the vehicle’s
battery.
For more inf ormation on how to
select the power mode, see page .
3.
178
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Making a Call
Features
433
\f—
—y
\f

y
) \f\fy\fy
2009 TL