wheel Acura TL 2009 Owner's Guide

You can make calls using any phone
number, or by using a name in the
HFL phonebook. You can also redial
the last number called. During a call,
HFLallowsyoutotalkupto30
minutes af ter you remove the key
f rom the ignition switch. Continuing
a call without running the engine
may discharge and weaken the
vehicle’s battery.With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Call’’ or ‘‘Dial.’’
HFL responds ‘‘What name or
number would you like to call/
dial? Press the Talk button and say
a name, a number, or say list to
hear the phonebook entries.’’
Press and release the Talk button.
Af ter the beep, say the number
you want to call. For example, say
‘‘123 456 7891.’’
HFL responds ‘‘123 456 7891.
Press the Talk button and
continue to add numbers, or say
Call or Dial to place a call.’’Press and release the Talk button.
Af ter the beep, say ‘‘Call’’ or ‘‘Dial.’’
HFL responds ‘‘Calling’’ or
‘‘Dialing.’’
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls.
To end the call, press the Back
button.
1.
2.
4.
3.
To make a call using a phone number,
do this:
CONT INUED
BluetoothHandsFreeL ink(Models without navigation system)
Making a Call
Features
407
\f—\f—y

y
) \f\fy\f
y
2009 TL

To make a call using a name in the HFLphonebook, do this: To redial the last number called by the
phone, do this:
With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Call’’ or ‘‘Dial.’’
HFL responds ‘‘What name or
number would you like to call/
dial? Press the Talk button and say
a name, a number, or say list to
hear the phonebook entries.’’
Press and release the Talk button.
After the beep, say the name you
want to call. For example, say
‘‘John.’’
HFL responds ‘‘Would you like to
call John? Press the Talk button
and say Yes or No.’’ Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
HFL responds ‘‘Calling’’ or
‘‘Dialing.’’
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls.
To end the call, press the Back
button.
Press and release the Talk button.
Af ter the beep, say ‘‘Redial.’’
HFL responds ‘‘Redialing.’’
Once connected, you will hear the
person you called through the audio
speakers. To change the volume, use
the audio system volume knob or the
steering wheel volume controls.
1.
2. 3.
4.
BluetoothHandsFreeL ink(Models without navigation system)
408
\f—\f—y
y
) \f\fy\f
y
2009 TL

»¼»¼
CONT INUED
You can store the desired number to
the HFL phonebook directly f rom
your cell phone.
Press and release the Talk button.
Af ter the beep, say ‘‘Phonebook.’’
HFL responds ‘‘Phonebook
options are store, edit, delete,
receive contact, and list. Press the
Talk button and say a command.’’
Press and release the Talk button.
Af ter the beep, say ‘‘List.’’
HFL responds by listing the
names in the phonebook. When it
saysthenameyouwanttocall,for
example, Eric , press and
release the Talk button. After the
beep, say ‘‘Call.’’ HFL responds
‘‘Would you like to call Eric ?
Press the Talk button and say Yes
or No.’’ Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ HFL
responds ‘‘Calling.’’
Once connected, you will hear the
person you called through the audio
speakers. To change the volume, use
the audio system volume knob or the
steering wheel volume controls. Your phone may not have
this capability. Visit or call the
HandsFreeLink
consumer support
at 1-888-528-7876. In Canada, visit , or call 1-888-9-ACURA-
9. You can see your phone’s owner’s
manual f or inf ormation.
1.
2.
3.
To call a name f rom the phonebook list,
do this:
www.acura.com/
handsf reelink
www.acura.caStoring a Phone Number Directly
f rom Your Phone
BluetoothHandsFreeL ink(Models without navigation system)
Features
415
NOTE:
\f—\f—y
\fy
) \f\fy\f\fy
2009 TL

Your vehicle’s HFL system allows
you to import your cellular
phonebook to HFL. Using the
navigation system, you can make a
call directly and store a desired
number in HFL f rom the list shown
on the navigation display. For more
inf ormation on how to import the
phonebook, see page . To make
a call, see page .Your phone may not have
phonebook import f unction. Visit ,orcall
HandsFreeLink
consumer support
at (888) 528-7876. In Canada, visit , or call (888) 9-ACURA-
9. You can also see your phone’s
owner’s manual f or inf ormation. The HFL microphone is on the
ceiling, in f ront of the map lights.
The microphone is shared with the
navigation system.
HFL is operable by interaction with
the navigation screen with the
Interface Dial, the HFL buttons on
the steering wheel, or by voice.
When HFL is in use, the sound
comes through the vehicle’s f ront
audio system speakers. If the audio
system is in use while operating
either of the HFL buttons or making
a call, HFL overrides the audio
system. To change the volume level,
use the audio system volume knob or
the steering wheel volume controls.
455
433
www.acura.com/handsfree link
www.acura.ca
How to Use HFL
Phonebook Microphone
A udio System A ll phones may notoperate identically, and some
may cause inconsistent operation
of HFL .
BluetoothHandsFreeL ink(Models with navigation system)
Features
421
NOTE: NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL

HFL system f unctions can be
accessed using the interf ace dial.
The interf ace dial has two parts, a
dial and a selector.The selector can be pushed lef t,
right, up, down, and in. Use the
selector to scroll through lists, to
select menus, and to highlight menu
items. When you make a selection,
push the center of the selector
(ENTER)togotothatselection.
The CANCEL button clears the
current screen and returns to the
previous display.If you receive a call and you are on
the Cellular Phone screen, the
f ollowing screen is displayed:
The dial turns lef t and right. Use it to
make selections f rom a list or menu
on the screen.
The INFO button takes you to the
inf ormation menu, where you can
select the Cellular Phone screen.
You can also press the PICK-UP
buttononthesteeringwheeltogo
directly to the Cellular Phone screen. If this is not displayed, press the
INFO button, select Cellular Phone,
then press ENTER to display the
Cellular Phone screen. You can also
pressthePICK-UPbuttononthe
steering wheel to go directly to the
Cellular Phone screen.
Interf ace Dial
HFL Display
BluetoothHandsFreeL ink(Models with navigation system)
422
ENTER
SELECTOR INFO BUTTON
CANCEL
BUTTON
CALLER NAME
PHONE DIALING
ROAM STATUS
BLUETOOTH INDICATOR
DIAL BATTERY LEVEL
STATUS
SIGNAL STRENGTH
\f—
—y
\f
\f\fy
) \f\fy\fy
2009 TL

To operate HFL, use the Pick-Up and
Hang-Up buttons on the lef t side of
the steering wheel.Here are some guidelines f or using
voice control:
Adjust the airflow from both the
dashboard and side vents so they
do not blow against the
microphone on the ceiling.
Close the windows and the
moonroof .
HANG-UP Button: This button is
used to end a call.
PICK-UP Button: This button is used
to answer incoming calls or to make
outgoing calls. You can also go
directly to the Cellular Phone screen
by pressing this button.
BACK Button: This button has the
same function as the CANCEL
button. When you press and release
it, the current voice command is
canceled and the display returns to
the previous screen.
The HFL buttons are used as
f ollows:
TALK Button: This button activates
the voice control system and is used
f or all voice commands. Press and
release it, wait f or a beep, and give a
voice command.
If you use the voice commands to
operate HFL, also use the TALK and
BACK buttons. When voice commands are used,
the fan speed will be automatically
adjusted to low. However, for
better voice recognition, lowering
the f an speed may be necessary.
To enter a command, press and
release the Talk button. After the
beep, say your command in a clear,
natural tone.
HFL Buttons
Using Voice Control
BluetoothHandsFreeL ink(Models with navigation system)
424
BACK BUTTONHANG-UP
BUTTON
TALK
BUTTON PICK-UP BUTTON
\f—\f—y
\fy
) \f\fy\fy
2009 TL

ÌHFL Calling display appears,
notifying you that the system is
dialing the entered phone number.
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls. To end the call, rotate the dial to
select ‘‘Hang-up’’ and press
ENTER, or press the Hang-Up
button on the steering wheel.
To delete a number with the
interf ace dial, move the selector to
the left and release it. To delete all
the numbers in one go, move the
selector to the lef t and hold it.
To enter a pound ( ), say
‘‘pound.’’ To enter a star (*), say
‘‘star.’’
Onthescreen,movetheinterface
selector to the right to select a pound
or star.
When you have f inished, press the
Pick-Upbuttononthesteering
wheel or move the interf ace
selector down to make the call, or
press the Talk button and say
‘‘Dial.’’ HFL responds ‘‘Dialing.’’
5.
6.7.
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
435
NOTE:
Example
\f—
—y
\f
y
) \f\fy\f\fy
2009 TL

Select the person’s phone number
f rom the ‘‘Select a number to call’’
screen, or press the Talk button
and say the list number of the
phone number you want to select.On the ‘‘Select a name’’
screen, move the interf ace selector
down to select ‘‘Search Phone Book,’’
or press the Talk button and say
‘‘Search Phone Book.’’ HFL responds
‘‘Please spell a keyword one letter at
a time.’’ Use the interf ace dial to
enter the keyword. Af ter the
keyword f or the name is entered,
move the interf ace selector down to
return to the ‘‘Select a name’’ screen.
Press the Pick-Up button on the
steering wheel or press ENTER to
make the call, or press the Talk
button and say ‘‘Dial.’’ HFL
responds ‘‘Dialing.’’
HFL Calling display appears,
notifying you that the system is
dialing the entered phone number.
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls.
To end the call, rotate the dial to
select ‘‘Hang-up’’ and press
ENTER, or press the Hang-Up
button on the steering wheel.
5. 6.
7.
8.
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
437
NOTE:
LIST NUMBER SELECTED NAME
\f—
—y
\f

y
) \f\fy\fy
2009 TL

To end the call, rotate the dial to
select ‘‘Hang-up’’ and press
ENTER, or press the Hang-Up
button on the steering wheel.You can delete all call history
when you move the interf ace
selector down when ‘‘All’’ is selected
on the call history screen, or press
the Talk button and say ‘‘Delete all.’’
Rotate the dial to scroll through
each list and select the party name
or phone number by pressing
ENTER, or press the Talk button
and say the list number of the call
record you want to select.
Press the Pick-Up button on the
steering wheel, or press ENTER
to make the call.
HFL Calling display appears,
notifying you that the system is
dialing the entered phone number.
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls.
When the conf irmation screen is
displayed, rotate the dial to select
‘‘Yes’’ and press ENTER, or press
the Talk button and say ‘‘Yes.’’
5.
6. 7.
4.
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
439
NOTE:
\f—\f—y
\fy
) \f\fy\fy
2009 TL

If you receive a call when you are not
on the phone, the HFL incoming call
screen appears. To answer the call,
pressthePick-Upbuttononthe
steering wheel and begin speaking.
If you don’t want to answer the call,
press the Hang-Up button.
If your phone has Call Waiting and
you receive a call when you are on
the phone, press and release the
Pick-Up button to answer it. When
you do this, the original call is placed
on hold. To return to the original call,
press the Pick-Up button again. If
you don’t want to answer the new
call, disregard it and continue with
your original call. If you want to hang
up the original call and answer the
new call, press the Hang-Up button.
When you select a ‘‘No
entry’’ f ield, HFL prompts you to
enter a phone number f rom your
phonebook or call history. See
‘‘Editing the Speed-Dial Numbers’’
f or details (page ).
HFL starts dialing the selected
number. HFL Calling screen is
displayed. Once connected, you
will hear the person you called
through the audio speakers. To
change the volume, use the audio
system volume knob or the
steering wheel volume controls.
To end the call, rotate the dial to
select ‘‘Hang-up’’ and press
ENTER, or press the Hang-Up
button on the steering wheel.
Rotate the dial to select a list
number and press ENTER, or, if
the number has a voice tag (voice
tagiconisshown),presstheTalk
button and say ‘‘Call’’ and then the
voice tag you stored. 5.
6.
4. 443
BluetoothHandsFreeL ink(Models with navigation system)
Receiving a Call
Features
441
NOTE:
VOICE TAG ICON
LIST NUMBER
—
—y

y
) yy
2009 TL