bluetooth Acura TL 2009 Workshop Manual

Your vehicle’s HFL system allows
you to import your cellular
phonebook to HFL. Using the
navigation system, you can make a
call directly and store a desired
number in HFL f rom the list shown
on the navigation display. For more
inf ormation on how to import the
phonebook, see page . To make
a call, see page .Your phone may not have
phonebook import f unction. Visit ,orcall
HandsFreeLink
consumer support
at (888) 528-7876. In Canada, visit , or call (888) 9-ACURA-
9. You can also see your phone’s
owner’s manual f or inf ormation. The HFL microphone is on the
ceiling, in f ront of the map lights.
The microphone is shared with the
navigation system.
HFL is operable by interaction with
the navigation screen with the
Interface Dial, the HFL buttons on
the steering wheel, or by voice.
When HFL is in use, the sound
comes through the vehicle’s f ront
audio system speakers. If the audio
system is in use while operating
either of the HFL buttons or making
a call, HFL overrides the audio
system. To change the volume level,
use the audio system volume knob or
the steering wheel volume controls.
455
433
www.acura.com/handsfree link
www.acura.ca
How to Use HFL
Phonebook Microphone
A udio System A ll phones may notoperate identically, and some
may cause inconsistent operation
of HFL .
BluetoothHandsFreeL ink(Models with navigation system)
Features
421
NOTE: NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL

HFL system f unctions can be
accessed using the interf ace dial.
The interf ace dial has two parts, a
dial and a selector.The selector can be pushed lef t,
right, up, down, and in. Use the
selector to scroll through lists, to
select menus, and to highlight menu
items. When you make a selection,
push the center of the selector
(ENTER)togotothatselection.
The CANCEL button clears the
current screen and returns to the
previous display.If you receive a call and you are on
the Cellular Phone screen, the
f ollowing screen is displayed:
The dial turns lef t and right. Use it to
make selections f rom a list or menu
on the screen.
The INFO button takes you to the
inf ormation menu, where you can
select the Cellular Phone screen.
You can also press the PICK-UP
buttononthesteeringwheeltogo
directly to the Cellular Phone screen. If this is not displayed, press the
INFO button, select Cellular Phone,
then press ENTER to display the
Cellular Phone screen. You can also
pressthePICK-UPbuttononthe
steering wheel to go directly to the
Cellular Phone screen.
Interf ace Dial
HFL Display
BluetoothHandsFreeL ink(Models with navigation system)
422
ENTER
SELECTOR INFO BUTTON
CANCEL
BUTTON
CALLER NAME
PHONE DIALING
ROAM STATUS
BLUETOOTH INDICATOR
DIAL BATTERY LEVEL
STATUS
SIGNAL STRENGTH
\f—
—y
\f
\f\fy
) \f\fy\fy
2009 TL

ÎÎ
ε
µ
µ
µ Î
ROAM Status Indicates your
phone is roaming.
Battery Level Status Indicates
the power currently remaining in
your phone’s battery. Five bars
equals f ull battery strength.
Signal Strength Indicates the
network signal strength of the
current phone. Five bars equals
f ull strength.
Caller name/Phone dialing
Indicates the number you dialed or
received, and a caller or receiver
name. Only the number will be
displayed if the caller or receiver’s
inf ormation has not been stored in
the phonebook. Some phones do not send this
inf ormation to HFL.
‘‘ ’’ indicator will be displayed on
the navigation display and center
display if your phone is linked to the
HFL system.
When you receive a phone call, a
pop-up will interrupt the display as
shown. This pop-up shows a caller
name and the phone number that has been stored in the phonebook
(see page ). While the system
searches f or inf ormation f rom the
stored data, ‘‘Now acquiring call
inf ormation’’ will be displayed. If the
caller chooses to hide the number
when making a call, ‘‘No Caller ID’’
will be displayed instead.
When you are operating HFL, or
dialing or receiving calls with the
audio system in use, you will see the
above screen.
You can also see the signal strength
and ROAM status on the center
display. :
455
BluetoothHandsFreeL ink(Models with navigation system)
Incoming Call Display
Features
423
U.S. model is shown.
\f—
—y
\f

\fy
) \f\fy\fy
2009 TL

To operate HFL, use the Pick-Up and
Hang-Up buttons on the lef t side of
the steering wheel.Here are some guidelines f or using
voice control:
Adjust the airflow from both the
dashboard and side vents so they
do not blow against the
microphone on the ceiling.
Close the windows and the
moonroof .
HANG-UP Button: This button is
used to end a call.
PICK-UP Button: This button is used
to answer incoming calls or to make
outgoing calls. You can also go
directly to the Cellular Phone screen
by pressing this button.
BACK Button: This button has the
same function as the CANCEL
button. When you press and release
it, the current voice command is
canceled and the display returns to
the previous screen.
The HFL buttons are used as
f ollows:
TALK Button: This button activates
the voice control system and is used
f or all voice commands. Press and
release it, wait f or a beep, and give a
voice command.
If you use the voice commands to
operate HFL, also use the TALK and
BACK buttons. When voice commands are used,
the fan speed will be automatically
adjusted to low. However, for
better voice recognition, lowering
the f an speed may be necessary.
To enter a command, press and
release the Talk button. After the
beep, say your command in a clear,
natural tone.
HFL Buttons
Using Voice Control
BluetoothHandsFreeL ink(Models with navigation system)
424
BACK BUTTONHANG-UP
BUTTON
TALK
BUTTON PICK-UP BUTTON
\f—\f—y
\fy
) \f\fy\fy
2009 TL

You can change the voice guidance
and system language to English,
French, or Spanish. The language
you select will be also used f or the
navigation system. Ref er to the
navigation system manual for details.
If the microphone picks up voices
other than yours, the system may
not interpret your voice
commands correctly.
If HFL does not recognize a
command, its response is ‘‘Pardon.’’
If it doesn’t recognize the
command it plays an appropriate
Help prompt. Response time may
vary depending on the voice
command. To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them.
To skip a voice prompt, press the
Talk button while HFL is speaking.
HFL will then wait f or your next
command.
To hear a list of available options
at any time, press the Talk button,
wait f or the beep, and say ‘‘Help.’’ Changing L anguage
BluetoothHandsFreeL ink(Models with navigation system)
Features
425
\f—\f—y

\fy
) \f\fy\f\fy
2009 TL

Your Bluetooth compatible phone
with HandsFree Prof ile must be
paired to HFL bef ore you can make
and receive hands-free calls. To
conf irm that your phone is Bluetooth
compatible, visit, or call (888) 528-7876.
In Canada, visit , or call
(888) 9-ACURA-9. Your phone
retailer should also be able to
conf irm if your phone is Bluetooth
compatible. The f ollowing procedure works f or
most phones. If you cannot pair
your phone to HFL with this
procedure, ref er to your phone’s
operating manual, visit
,callthe
HandsFreeLink
consumer
support at (888) 528-7876, or call
your phone retailer. In Canada,
visit , or call (888) 9-
ACURA-9.
Park the vehicle. With your phone
on and the vehicle’s power mode
in ACCESSORY or ON, press the
INFO button, rotate the interface
dial to select ‘‘Cellular Phone,’’ and
push ENTER, or press the Talk
button and say ‘‘Cellular Phone.’’
HFL responds ‘‘Which cellular
phone item would you like to
select?’’
HFL does not allow you to pair
your phone if the vehicle is
moving.
During the pairing process, turn
of f any previously paired phones
bef ore pairing a new phone.
Your phone’s battery may drain
f aster when it is paired to HFL.
HFL operates best if your phone is
set to automatically recognize the
system (Discovery mode).
If af ter 3 minutes your phone is
not ready to pair or a phone is not
f ound, the system will time out
and start the pairing process f rom
the beginning.
Up to six phones can be paired to
HFL.
For more inf ormation on how to
select the power mode, see page.
1.
178www.acura.com/
handsf reelink www.acura.ca www.acura.
com/handsf reelink
www.acura.ca
Pairing Your Phone
NOT E:
BluetoothHandsFreeL ink(Models with navigation system)
426
\f—\f—y
\fy
) \f\fy\f
y
2009 TL

CONT INUED
Move the interf ace selector down.
The ‘‘Phone setup’’ screen appears.
Rotate the dial to select ‘‘Setup
Bluetooth Phone,’’ and press
ENTER, or press the Talk button
and say ‘‘Phone setup.’’ HFL
responds ‘‘Please select the phone
setup item.’’ Press the Talk button
and say ‘‘Setup Bluetooth Phone.’’
HFL responds ‘‘Please select a
Bluetooth Phone item to setup.’’When a screen message appears
that provides a pass-key, enter the
pass-key on your cell phone when
prompted in its discovery mode.
Make sure your phone is in
Discovery mode at this point.
Rotate the dial to select ‘‘Pair
phone’’ and press ENTER, or
press the Talk button and say
‘‘Pair phone.’’
To get your phone into its
discovery mode, ref er to the
phone’s operation manual. 4.
3.
2.
BluetoothHandsFreeL ink(Models with navigation system)
Features
427
Example
\f—\f—y
\fy
) \f\fy\fy
2009 TL

µThe navigation system can
manage up to six phones. If you
attempt to pair a seventh phone, a
screen message will appear,
prompting you to delete one of your
existing phones.
The notif ication is displayed. If OK,
press ENTER. Then the message
‘‘Now your phone is ready f or
hands-free calls’’ appears. If you
want to pair two or more phones,
repeat steps 2 4.
If you want to cancel the
pairing process at this point, press
ENTER to select ‘‘Cancel,’’ or press
the Talk button and say ‘‘Cancel.’’
When the pass-key is transf erred
to HFL, it recognizes and pairs
your cell phone. HFL
automatically attempts to connect
to your cell phone that has just
been paired.
5.
6.
BluetoothHandsFreeL ink(Models with navigation system)
428
NOTE:
NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL

Rotate the dial to select ‘‘Pass-key’’
and press ENTER, or press the
Talk button and say ‘‘Pass-key.’’
HFL responds ‘‘Would you like to
setup a random or f ixed Pass-
key?’’
Select the Cellular Phone screen,
then move the interface selector
down. Rotate the dial to select
‘‘Setup Bluetooth Phone’’ and
press ENTER, or press the Talk
button and say ‘‘Setup Bluetooth
Phone.’’ HFL responds ‘‘Please
select a Bluetooth Phone item to
setup.’’
Rotate the interface dial to select
‘‘Yes’’ and press ENTER, or press
the Talk button and say ‘‘Yes.’’ The
display changes to the deleting
procedure. To delete a phone, see
page . When the phone is
deleted, you can pair the seventh
(now sixth) phone to the system.
HFL uses a Bluetooth pass-key to
pair a cellular phone. By def ault, the
system generates and uses a random
pass-key f or any Bluetooth
connection. You can change this
setting to the fixed pass-key. Do the
f ollowing.
1.
2.
431
CONT INUED
Specif ying t he Bluet oot hPass-key
BluetoothHandsFreeL ink(Models with navigation system)
Features
429
——y
y
) yy
2009 TL

Rotate the dial to select either
‘‘Fixed’’ or ‘‘Random’’ and press
ENTER, or press the Talk button
and say ‘‘Fixed’’ or ‘‘Random.’’
The navigation system generates
and uses a random pass-key f or
subsequent phone pairing.
HFL returns to the Setup Bluetooth
phone screen. Specif y a 4-digit number in the pass-
keyentryscreenandmovethe
interf ace selector down. The
specif ied number will be generated
and used f or subsequent phone
pairing.
HFL responds ‘‘Please say your 4-
digit pass-key.’’Refer to the navigation system
manual f or inf ormation on how to
enter numbers.
3.
When selecting ‘‘Random’’ When selecting ‘‘Fixed’’
BluetoothHandsFreeL ink(Models with navigation system)
430
Example
\f—\f—y
y
) \f\fy\fy
2009 TL