warning light Acura TLX 2015 Owner's Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2015, Model line: TLX, Model: Acura TLX 2015Pages: 545, PDF Size: 19.64 MB
Page 5 of 545

4Quick Reference Guide
Quick Reference GuideVisual Index
❙System Indicators (P70)❙Gauges 
(P117)
❙Multi-Information 
Display 
(P118)
❙Steering Wheel Adjustments 
(P176)
❙ENGINE START/STOP Button 
(P161)
❙Hazard Warning Button❙Rear Window Defogger/Heated Door 
Mirror Button 
(P173)
Canadian models❙
 (Vehicle Stability Assist (VSA ®) System 
OFF) Button 
(P387)
❙Lane Departure Warning (LDW) Button
* (P372)
❙Parking Sensor System Button
* (P413)
❙Collision Mitigation Braking System
TM 
(CMBS
TM) OFF Button
* (P407)
❙Headlight Washer Button
* (P171)
❙Heated Windshield Button
* (P173)
❙Road Departure Mitigation (RDM) Button
* 
(P377)❙On Demand Multi-Use Display
TM (P216)
❙Audio System 
(P210)
❙Climate Control System 
(P199)
❙Trunk Release 
(P152)
❙Fuel Fill Door Release Button 
(P421)
Canadian models❙Navigation System
* 
()  See the Navigation System Manual❙Audio/Information Screen 
(P222) 
Page 12 of 545

11Quick Reference Guide
Instrument Panel 
(P 69)
System Indicators
Malfunction Indicator 
Lamp
Low Oil Pressure 
Indicator
Charging System 
Indicator Vehicle Stability Assist 
(VSA®) System Indicator
VSA ® OFF Indicator
Electric Power Steering 
(EPS) System Indicator
Lights Indicators
Lights On Indicator
High Beam Indicator
Immobilizer System 
Indicator
System Indicators
System Message 
Indicator
Gauges 
(P117)
/Display 
(P118)
/System Indicators 
(P70)
Low Tire Pressure/
TPMS Indicator
Keyless Access System 
Indicator
Electric Parking Brake 
System Indicator
Electric Parking Brake 
Indicator Automatic Brake Hold 
System Indicator SPORT
 (Sport mode) 
Indicator Blind Spot Information 
(BSI) Indicator
*
Forward Collision Warning 
Indicator
*/Collision Mitigation 
Braking System
TM (CMBS
TM) 
Indicator
*
Lane Departure Warning 
Indicator
*/Road Departure 
Mitigation (RDM) Indicator
*
Automatic Brake Hold 
Indicator
U.S.
CanadaU.S.
Canada
Fog Light Indicator
*
Temperature 
Gauge Security 
System Alarm 
IndicatorFuel Gauge
Tachometer
Multi-Information Display
Speedometer
Gear Position Indicator
*/
Shift Lever Position 
Indicator
*
M  (sequential mode) 
Indicator/Sequential 
Mode Gear Selection 
Indicator
System Indicators
Lane Keeping Assist 
System ( LKAS) Indicator
*
Adaptive Cruise Control 
(ACC ) with Low Speed 
Follow (LSF) Indicator
*
Models without 
full color display
Anti-lock Brake System 
( ABS ) Indicator
Seat Belt Reminder 
Indicator CRUISE CONTROL 
Indicator
*
Brake System 
Indicator (Red) Supplemental Restraint 
System Indicator
CRUISE MAIN 
Indicator
*
Low Fuel Indicator Turn Signal and Hazard 
Warning Indicators
Brake System 
Indicator (Amber)
U.S.
Canada
U.S.
Canada
Door and Trunk Open 
Indicator
*
Precision All Wheel 
Steer System Indicator
*
ECON
ECON  (Econ mode) 
Indicator SH-AWD Indicator
*
Auto Idle Stop System 
Indicator (Amber)
*
Auto Idle Stop 
Indicator (Green)
*
*  Not available on all models 
Page 35 of 545

uuSeat Belts uAbout Your Seat Belts
34Safe Driving
The front seats are equipped with automatic 
seat belt tensioners to enhance safety.
The tensioners automatically tighten the front 
seat belts during a moderate-to-severe frontal 
collision, sometimes even if the collision is not 
severe enough to inflate the front airbags or 
the driver’s knee airbag.
Are the motor-powered pretensioners that 
start to retract the front seat belts when the 
CMBS
TM, brake assist system, or VSA ® system 
is in operation. They may also activate when 
you steer the vehicle hard, or the vehicle is 
impacted. After retracted, the seat belts are 
slackened to their original positions.
As convenient features, the e-pretensioners 
slightly retract the seat belts when you latch 
the seat belt buckle, depress the brake pedal 
more aggressively than you normally do, or 
make a sharp turn, and fully retract when you 
release the seat belt buckle. 
■
Automatic Seat Belt Tensioners
1 Automatic Seat Belt Tensioners
The seat belt tensioners can only operate once.
If a tensioner is activated, the SRS indicator will come 
on. Have a dealer replace the tensioner and 
thoroughly inspect the seat belt system as it may not 
offer protection in a subsequent crash.
During a moderate-to-severe side impact, the 
tensioner on that side of the vehicle also activates.
■
Seat Belt e-pretensioners
*
1Seat Belt e-pretensioners
*
If only the e-pretensioners were activated, no 
components need to be replaced.
The e-pretensioners may not work if:•A warning message for e-pretensioners appears on 
multi-information display.•Vehicle Stability Assist (VSA ®) System Indicator is 
on.
* Not available on all models 
Page 52 of 545

Continued
51
uuAirbags uAirbag System Indicators
Safe Driving
■When side curtain airbags deploy in a frontal collision
One or both side curtain airbags may inflate in a moderate-to-severe angled frontal 
collision.
In this case, the side curtain airbags will deploy slightly after the front airbags.Airbag System IndicatorsIf a problem occurs in the airbag system, the SRS indicator will come on and a 
message appears on the multi-information display.
■When the power mode is set to ON
The indicator comes on for a few seconds, 
then goes off. This tells you the system is 
working properly.
If the indicator comes on at any other time, or does not come on at all, have the 
system checked by a dealer as soon as possible. If you don’t, your airbags and seat 
belt tensioners may not work properly when they are needed.
■
Supplemental Restraint System (SRS) Indicator
1 Supplemental Restraint System (SRS) Indicator
3
WARNING
Ignoring the SRS indicator can result in 
serious injury or death if the airbag systems 
or tensioners do not work properly.
Have your vehicle checked by a dealer as 
soon as possible if the SRS indicator alerts 
you to a possible problem.
Models with 
full color 
display
Models without 
full color 
display 
Page 77 of 545

76
uuIndicators u
Instrument Panel
*1:On the left: Models with full color display
On the right: Models without full color display
*2:Models with full color display
*3:Models without full color displayIndicator
Name
On/Blinking
Explanation
Message
*1
Transmission 
Indicator
●The indicated current gear 
selection blinks if there is a 
problem with the 
transmission system.
●Avoid sudden start and acceleration, and 
stop in a safe place immediately.
Have your vehicle checked by a dealer.
●All the gear positions may 
light for several seconds, and 
go off.
●When all the gear positions light, 
immediately stop your vehicle in a safe place.●Indicators go off if there is no problem. 
However, even if they go off, take your 
vehicle to a dealer for inspection.
●The indicated current gear 
selection or all the gear 
positions blink if there is a 
problem with the 
transmission system, and the 
vehicle no longer moves.
●Immediately stop in a safe place.
2 Emergency Towing  P. 515
●Have your vehicle checked by a dealer.
●The indicated current gear 
selection or all the gear 
positions blink if you cannot 
select 
(P
 due to the 
transmission system failure.
●The engine can be activated as a temporary 
measure.
2
If the Transmission Indicator Blinks along 
with the Warning Message
 P. 509
●Set the parking brake when parking.●Have your vehicle checked by a dealer 
immediately.
Models with electronic gear selector
*2*3 
Page 84 of 545

83
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Turn Signal and 
Hazard Warning 
Indicators
●Blinks when you operate the turn 
signal lever.●Blink if you press the hazard warning 
button.
●Does not blink or blinks rapidly - A turn 
signal light bulb has blown. Change the 
bulb immediately.
2Replacing Light Bulbs  P. 447, 448, 450
—
High Beam 
Indicator
●Comes on when the high beam 
headlights are on.
—
—
Lights On 
Indicator
●Comes on whenever the light switch 
is on, or in AUTO when the exterior 
lights are on.
●If you set the power mode to ACCESSORY 
or VEHICLE OFF (LOCK) while the exterior 
lights are on, a chime sounds when the 
driver’s door is opened.
—
Fog Light 
Indicator
*
●Comes on when the fog lights are 
on.
—
—
Immobilizer 
System Indicator
●Comes on briefly when you set the 
power mode to ON, then goes off.●Comes on if the immobilizer system 
cannot recognize the key 
information.
●Blinks  - You cannot start the engine. Set 
the power mode to VEHICLE OFF (LOCK), 
then select the ON mode again.●Repeatedly blinks  - The system may be 
malfunctioning. Have your vehicle checked 
by a dealer.●Do not attempt to alter this system or add 
other devices to it. Electrical problems can 
occur.
—
* Not available on all models 
Page 128 of 545

127
uuGauges and Multi-Information Display uMulti-Information Display
Continued
Instrument Panel
■Customization flow
Roll the right selector wheel to select  Vehicle Settings and push the right selector wheel.Vehicle Settings
“Trip A” Reset Timing
Language SelectionAdjust Outside Temp. DisplayMemory Position LinkDoor Unlock ModeKeyless Access Light Flash
Driver Assist System Setup
Meter Setup
Driving Position SetupKeyless Access Setup
“Trip B” Reset Timing
Turn by Turn Display
*
Forward Collision Warning Distance
*
ACC Forward Vehicle Detect Beep
*
Push
PushPush
Lane Keeping Assist Suspend Beep
*
Blind Spot Info
*
Seat Position Movement At Entry/Exit
Auto Seat Belt Tension
*
Roll
Keyless Access Beep
Push
Roll
PushPush
RollRollRoll
RollRollRoll
ACC Display Speed Unit
*
Road Departure Mitigation Setting
*
Remote Start System On/Off
*
Keyless Access Beep Volume
Auto Idle Stop Guidance Screens
*
Roll
* Not available on all models 
Page 159 of 545

158Controls
Opening and Closing the WindowsOpening/Closing the Power WindowsThe power windows can be opened and closed when the power mode is in ON, 
using the switches on the doors. The driver’s side switches can be used to open and 
close all of the windows.
The power window lock button on the driver’s side must be switched off (not 
pushed in, indicator off) to open and close the windows from anywhere other than 
the driver’s seat.
When the power window lock button is pushed in, the indicator comes on and you 
can only operate the driver’s window. Turn the power window lock button on when 
children are in the vehicle.
■Automatic operation
To open:  Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To 
stop the window at any  time, push or pull the 
switch briefly.■Manual operation
To open:  Push the switch down lightly, and 
hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it 
until the desired position is reached.
■
Opening/Closing the Wi ndows with Auto-Open/Close Function
1Opening/Closing the Power Windows
The power windows can be operated for up to 10 
minutes after you set th e power mode to VEHICLE 
OFF (LOCK).
Opening either front door cancels this function.
Auto Reverse
If a power window senses resistance when closing 
automatically, it stops closing and reverses direction.
The driver’s window auto reverse function is disabled 
when you continuously pull up the switch.
The auto reverse function stops sensing when the 
window is almost closed to ensure that it fully closes.
3
WARNING
Closing a power window on someone’s 
hands or fingers can cause serious injury.
Make sure your passengers are away from 
the windows before closing them.
ON
OFF
Power Window 
Lock ButtonIndicator
Driver’s 
Window 
Switch
Front Passenger’s 
Window SwitchRear Passenger’s 
Window Switches 
Page 161 of 545

160Controls
Opening and Closing the MoonroofYou can only operate the moonroof when the power mode is in ON. Use the switch 
in the front of the ceiling to open and close the moonroof.
■Automatic operation
To open:  Pull the switch back firmly.
To close: Push the switch forward firmly.
The moonroof will automatically open or close 
all the way. To stop the moonroof midway, 
touch the switch briefly.■Manual operation
To open:  Pull the switch back lightly, and 
hold it until the desired position is reached.
To close: Push the switch forward lightly, and 
hold it until the desired position is reached.■Tilting the moonroof up
To tilt:  Push on the center of the moonroof 
switch.
To close: Push the switch forward firmly, then 
release.
■
Opening/Closing the Moonroof
1 Opening/Closing the MoonroofNOTICEOpening the moonroof in below freezing 
temperature or when it is covered with snow or ice 
can damage the moonroof panel or motor.
The power moonroof can be operated for up to 10 
minutes after you set th e power mode to VEHICLE 
OFF (LOCK).
Opening either front door cancels this function.
When resistance is detected, the auto reverse 
function causes the moonroof to change directions, 
then stop. Auto reverse stops sensing when the 
moonroof is almost closed to ensure that it fully 
closes.
3
WARNING
Opening or closing the moonroof on 
someone’s hands or fingers can cause 
serious injury.
Make sure all hands and fingers are clear of 
the moonroof before opening or closing it.
Close
OpenTilt 
Page 190 of 545

189
uuInterior Lights/Interior Convenience Items uInterior Convenience Items
Continued
Controls
Interior Convenience Items
Press the button to open the glove box. You 
can lock the glove box with the built-in key.■Removable shelf
The shelf in the glove box is detachable. To 
remove it, disengage the tabs.
The removable shelf can be stored upside 
down in the glove box.
■
Glove Box
1 Glove Box
3
WARNING
An open glove box can cause serious injury 
to your passenger in a crash, even if the 
passenger is wearing the seat belt.
Always keep the glove box closed while 
driving.
Glove Box
Release Button
To Lock
Tab
Shelf