ABS Acura TSX 2004 User Guide

The VSA system indicator (see page) comes on and stays on when
there is a problem with the VSA
system. The VSA Activation
indicator will also come on.
The VSA system indicator may come
on along with the ABS indicator if
there is a problem with the anti-lock
brake system. If the VSA indicator comes on while
driving, pull to the side of the road
when it is saf e and turn of f the
engine. Reset the system by
restarting the engine, and watch the
VSA system indicator. If the
indicator remains on, or comes back
on while driving, have the VSA
system inspected by your Acura
dealer.
If the indicator does not come on
when the ignition switch is turned
ON(II),theremaybeaproblem
with the VSA system. Have your
dealer inspect your car as soon as
possible.
When VSA is off, the VSA Activation
Indicator light comes on as a
reminder. Pressing the switch again
turns the system back on. This switch is under the lef t vent.
Press it to turn the Vehicle Stability
Assist system on and of f .
Without VSA, your car will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.
61
CONT INUED
VSA Syst em Indicat or
Vehicle Stability Assist (VSA) System
Driving
VSA Of f Switch
217
VSA SYSTEM INDICATOR
VSA OFF SWITCH

µ
Ì
Î
Î
Ì Ì
Maint enance234
Visually inspect the following items:
Service at the indicated distance
or time whichever comes first.
miles x 1,000
km x 1,000
months10
16
20
3230
4840
6450
8060
9670
112 80
128 90
144 100
160110
176120
192130
208140
224150
240160
256170
272180
288
Replace engine oil
Replace engine oil filter
Check engine oil and coolant
Replace air cleaner element
Inspect valve clearance
Replace spark plugs
Inspect drive belt
Inspect idle speed
Replace engine coolant
Replace transmission fluid
Inspect front and rear brakes
Replace brake fluid
Check parking brake adjustment
Replace dust and pollen filter
Rotate tires (Check tire inflation and condition at
least once per month) Every 10,000 miles (16,000 km) or 1 year
Check oil and coolant at each fuel stop Every 30,000 miles (48,000 km)
Inspect every 110,000 miles (176,000 km), otherwise adjust only if noisy Every 110,000 miles (176,000 km)
Inspect every 30,000 miles (48,000 km) or 2 years
At 120,000 miles (192,000 km) or 10 years,
then every 60,000 miles (96,000 km) or 5 years
Every 3 years (independent of mileage)
Every 30,000 miles (48,000 km) or 2 years
Rotate tires every 10,000 miles (16,000 km)
Tie rod ends, steering gear box, and boots
Suspension components
Driveshaft boots
Brake hoses and lines (including ABS)
All fluid levels and condition of fluids
Exhaust system
Fuel lines and connections Replace at 120,000 miles (192,000 km) or 6 years, then every 90,000 miles (144,000 km) or 5 years. See information on maintenance and emissions warranty, last column, page . 72
60 84 96 108
12 24 36 48
M/T
A/T
:
: 233
Maintenance Schedule for Normal Conditions

µµ
Ø
Ø
Ø
Ø
Ø
Ø
Ø Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ì
Ì

CONT INUED
Maint enance235
A, B, C, D, E
U.S. Owners
Canadian Owners
AB
C
D E
Service at the indicated distance or time, whichever comes first. Do the items in
as required for each distance/time.
Refer to page to determine which schedule to use. Use the Maintenance Schedule for Severe Conditions.
Do items in A.
Do items in A, B.
Do items in A, C.
Do items in A, B.
Do items in A.Replace brake fluid (independent of mileage).
DoitemsinA,B,C.
Do items in A.
Do items in A, B.
Do items in A, C.
Do items in A, B.
Do items in A, D. Replace brake fluid (independent of mileage).
Replace manual transmission fluid.
Replace automatic transmission fluid, then
replace every 90,000mi/144,000 km/5 yrs.
DoitemsinA,B,C. Replace engine coolant, then replace every
60,000mi/96,000 km/5 yrs.
Do items in A.
Do items in A, B.
Do items in A, C.
DoitemsinA,B,E.
Do items in A. Replace brake fluid (independent of mileage).
Replace engine coolant.
DoitemsinA,B,C.
10,000 mi/16,000 km
20,000 mi/32,000 km/1 yr
30,000 mi/48,000 km
40,000 mi/64,000 km/2 yrs
50,000 mi/80,000 km
3yrs
60,000 mi/96,000 km/3 yrs
70,000 mi/112,000 km
80,000 mi/128,000 km/4 yrs
90,000 mi/144,000 km
100,000 mi/160,000 km/5 yrs
110,000 mi/176,000 km
6yrs
120,000 mi/192,000 km/6 yrs
120,000 mi/192,000 km/10 yrs
130,000 mi/208,000 km
140,000 mi/224,000 km/7 yrs
150,000 mi/240,000 km
160,000 mi/256,000 km/8 yrs
170,000 mi/272,000 km
9yrs
180,000 mi/288,000 km/15 yrs,
then replace every 60,000 mi/
96,000 km/5 yrs
180,000 mi/288,000 km/9 yrs Replace engine oil.
Rotate tires (follow pattern on page
276).
Replace engine oil filter.
Inspect front and rear brakes.
Check parking brake adjustment.
Inspect tie rod ends, steering gear box, and boots.
Inspect suspension components.
Inspect driveshaft boots.
Inspect brake hoses and lines (including ABS).
Check all fluid levels, condition of fluids, and check
for leaks. Inspect exhaust system.
Inspect fuel lines and connections.
Inspect drive belt.
Replace air cleaner element.
Replace dust and pollen filter.
Inspect valve clearance (independent of time).
Replace spark plugs (independent of time).
Inspect idle speed.
See information on maintenance and emissions warranty, last
column, page .
Check engine oil and coolant at each fuel stop.
Check and adjust valve clearance, cold engine, only if noisy.
NOTE: :
233
232
Maintenance Schedule for Normal Conditions (listed by distance/time)

µ
Ì
Î
Î
Ì Ì
Maint enance236
Visually inspect the following items:
miles x 1,000
km x 1,000
months
10
16
20
3230
4840
6450
8060
9670
112 80
128 90
144 100
160110
176120
192130
208140
224150
240160
256170
272180
288
Every 5,000 miles (8,000 km) or 6 months
Service at the indicated distance
or time whichever comes first.
Replace engine oil
Replace engine oil filter
Check engine oil and coolant
Replace air cleaner element
Inspect valve clearance
Replace spark plugs
Inspect drive belt
Inspect idle speed
Replace engine coolant
Replace transmission fluid
Inspect front and rear brakes
Replace brake fluid
Check parking brake adjustment
Replace dust and pollen filter
Lubricate all hinges, locks, and latches
Rotate tires (Check tire inflation and condition at
least once per month)
Tie rod ends, steering gear box, and boots
Suspension components
Driveshaft boots
Brake hoses and lines (including ABS)
All fluid levels and condition of fluids
Exhaust system
Fuel lines and connections
Lights and controls, vehicle underbody Every 10,000 miles (16,000 km) or 1 year
Check oil and coolant at each fuel stop
Every 15,000 miles (24,000 km) (Use normal schedule except in dusty conditions) Inspect every 110,000 miles (176,000 km), otherwise adjust only if noisy Every 110,000 miles (176,000 km)
Inspect every 30,000 miles (48,000 km) or 2 years
At 120,000 miles (192,000 km) or 10 years,
then every 60,000 miles (96,000 km) or 5 years
At 60,000 miles (96,000 km) or 3 years, then every 30,000 miles (48,000 km) or 2 years Inspect every 10,000 miles (16,000 km) or 1 yearEvery 3 years (independent of mileage)
Every 30,000 miles (48,000 km) or 2 years
Lubricate every 10,000 miles (16,000 km) or 1 year Rotate tires every 10,000 miles (16,000 km)
Inspect every 10,000 miles (16,000 km) or 1 year
See dust and pollen filter on page for replacement information under special driving conditions. See information on maintenance and emissions warranty, last column, page . 72
60 84 96 108
12 24 36 48
M/T
A/T
:
: 233
270
Maintenance Schedule for Severe Conditions

µµ
Ø
Ø
Ø
Ø Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ì
Ì
Î
Î Ì
Maint enance237
A, B, C, D, E, F, G, H
U.S. Owners
Canadian Owners
AB
C
D
EF
G
H
Service at the indicated distance or time, whichever comes first. Do the items in
as required for each distance/time interval.
Refer to page to determine which schedule to use. Use the Maintenance Schedule for Severe Conditions.
Do item in A.
Do items in A, B.
Do items in A, C.
DoitemsinA,B,D.
Do item in A.
DoitemsinA,B,C,E.
Do item in A.
DoitemsinA,B,D.
Do items in A, C.
Do items in A, B.
Do item in A.Replace brake fluid (independent of mileage).
DoitemsinA,B,C,D,E,F. Replace automatic transmission fluid.
Do item in A.
Do items in A, B.
Do items in A, C.
DoitemsinA,B,D.
Do item in A.
DoitemsinA,B,C,E. Replace automatic transmission fluid.
Do item in A.
DoitemsinA,B,D.
Do items in A, C.
DoitemsinA,B,G.
Do item in A. Replace brake fluid (independent of mileage).
DoitemsinA,B,C,D,E,F. Replace engine oil.
Replace engine oil filter.
Inspect front and rear brakes.
Lubricate all hinges, locks, and latches.
Rotate tires (follow pattern on page
276).
Inspect tie rod ends, steering gear box, and boots.
Inspect suspension components.
Inspect drive shaft boots.
Replace air cleaner element.
Check parking brake adjustment.
Inspect brake hoses and lines (including ABS).
Inspect all fluid levels, condition of fluids, and check
for leaks. Inspect exhaust system.
Inspect fuel lines and connections.
Check all lights.
Inspect the underbody.
Inspect drive belt.
Replace dust and pollen filter .
Replace transmission fluid (M/T).
Inspect valve clearance.
Replace spark plugs.
Inspect idle speed.
5,000 mi/8,000 km
10,000 mi/16,000 km
15,000 mi/24,000 km
20,000 mi/32,000 km/1 yr
25,000 mi/40,000 km
30,000 mi/48,000 km
35,000 mi/56,000 km
40,000 mi/64,000 km/2 yrs
45,000 mi/72,000 km
50,000 mi/80,000 km
55,000 mi/88,000 km
3yrs
60,000 mi/96,000 km/3 yrs
60,000 mi/96,000 km/3 yrs,
then replace every 30,000mi/
48,000 km/2yrs
65,000 mi/104,000 km
70,000 mi/112,000 km
75,000 mi/120,000 km
80,000 mi/128,000 km/4 yrs
85,000 mi/136,000 km
90,000 mi/144,000 km
90,000 mi/144,000 km/5 yrs,
then replace every 30,000 mi/
48,000 km/2 yrs
95,000 mi/152,000 km
100,000 mi/160,000 km/5 yrs
105,000 mi/168,000 km
110,000 mi/176,000 km
115,000 mi/184,000 km
6yrs
120,000 mi/192,000 km/6 yrs
See dust and pollen filter on page for replacement information
under special driving conditions. See information on maintenance and emissions warranty, last
column, page .
: :
232
233270
Maintenance Schedule for Severe Conditions (listed by distance/time)

Remove the blade f rom its holder
by grasping the tabbed end of the
blade. Pull f irmly until the tabs
come out of the holder.Examine the new wiper blades. If
they have no plastic or metal rein-
f orcement along the back edge,
remove the metal reinf orcement
strips f rom the old wiper blade and
install them in the slots along the
edge of the new blade.Slide the new wiper blade into the
holder until the tabs lock.
Lower the wiper arm down against
the windshield. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the passenger’s side f irst,
then the driver’s side.
3. 4. 5.
6.
7.
Wiper Blades
Maint enance268
BLADE BLADE
REINFORCEMENT

The dust and pollen f ilter removes
pollen and dust that is brought in
f rom the outside through the heating
andcoolingsystem.To replace it: Push the stop on the right side of
the glove box to detach it from the
glove box.
This f ilter should be replaced every
30,000 miles (48,000 km) under
normal conditions. It should be
replaced every 15,000 miles (24,000
km) if you drive primarily in urban
areas that have high concentrations
of soot in the air f rom industry and
diesel-powered vehicles. Replace it
more of ten if air f low f rom the
climate control system becomes less
than usual. The dust and pollen f ilter is behind
the glove box.
Open the glove box, and remove
its contents. Remove the side tabs by carefully
prying them out with a
screwdriver, then pivot the glove
box out of the way.
1. 3. 2.Replacement
Dust and Pollen Filter
Maint enance270
STOP
SIDE TABS

Pushinthetabsonthecornersof
the dust and pollen f ilter case. Pull
out the case.Remove the filter from the case.
Install the new f ilter in the case.
Make sure the arrows of the ‘‘AIR
FLOW’’ marks on the f ilter point
to the air flow direction
(downward).Install the case. Make sure both
tabs ‘‘click’’ into place.
Install the glove box stop and side
tabs, then reinstall the contents,
and close the glove box.
If you are not sure how to replace
the dust and pollen f ilter, have it
replaced by your Acura dealer.
5.
6. 7.
8.
4.
Dust and Pollen Filter
Maint enance271

It is best to replace all f our tires at
thesametime.If thatisnotpossible
or necessary, then replace the two
f ront tires or the two rear tires as a
pair. Replacing just one tire can
seriously af f ect your car’s handling.Wheel:
Tire:
TheABSworksbycomparingthe
speed of the wheels. When replacing
tires, use the same size originally
supplied with the car. Tire size and
construction can af f ect wheel speed
and may cause the system to work
inconsistently.
If you ever need to replace a wheel,
make sure the wheel’s specif ications
match those of the original wheel
that came on your car. Replacement
wheels are available at your Acura
dealer. See page f or inf ormation about
DOT Tire Quality Grading.
337
Tires
Maint enance
Wheels and T ires
277
P215/50R17 93V 17x7JJ
Installing improper tires on your
car can affect handling and
stability. This can cause a crash
in which you can be seriously
hurt or killed.
Always use the size and type of
tires recommended in this
owner’s manual.

CONT INUED
Open the hood. If you need to
change a bulb on the driver’s side,
undo the three f asteners and
remove the air intake cover.Remove the electrical connector
f rom the bulb by pulling the
connector straight back.
Remove the rubber weather seal
by pulling on the tab.Unclip the end of the hold-down
wire f rom its slot. Pivot it out of
the way and remove the bulb.
Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
Install the rubber seal over the
back of the headlight assembly.
Make sure it is right side up; it is
marked with an arrow.
1. 2.
3.6. 4.
5.
Lights
Maint enance283
FASTENER
AIR INTAKE COVER
HOLD-DOWN WIREBULB
WEATHER SEAL
CONNECTOR