battery Acura TSX 2011 User Guide

Audio System
Auxiliary Input Jack
140Features
Auxiliary Input JackUse the jack in the console compartment to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.

The audio system automatically switches
to the AUX mode.
Auxiliary Input Jack
To switch the mode, press any of the audio mode
buttons. You can return to the AUX mode by
pressing the AUX button.
You cannot use the auxiliary input jack if you
replace the audio system.
Audio System Theft ProtectionThe audio system is disabled when it is disconnected from the power source, such
as when the battery is disconnected or goes dead.
Entering the audio security code
"ENTER CODE" appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the audio security code using the preset buttons. If you enter an incorrect
digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial
number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information
from a dealer.

168Features
Bluetooth
® HandsFreeLink
®
Using HFL
Help FeaturesTo hear general HFL information and help, say "Tutorial." t
Say "Hands free help" or "Help" any time to get help or hear a list of t
commands.
The multi-information display notifies you
when there is an incoming call.
Information Display
Bluetooth
® HandsFreeLink
®
Bluetooth
® Wireless Technology
Bluetooth® name and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motors Co., Ltd., is
under license. Other trademarks and trade names
are those of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt
Bluetooth® Audio when it is playing. Audio will
resume when the call is ended.
Information Display
The information that appears on the multi-
information display varies between phone models. Signal
StrengthHFL Mode Battery
Level
Status
Phone
Number Roam
Status

169
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
HFL MenusThe ignition switch must be in ACCESSORY
I or ON
II
to use HFL.
HFL Menus
To use HFL, you must first pair your Bluetooth-
compatible cell phone to the system while the
vehicle is parked.
Press the
(HFL Talk) button each time you give a command
"Phone setup"
"Pair""Edit""Delete""List""Status"
"Next phone"
"Set pairing code"e.g.: "123-456-####"
e.g.: "Jim Smith"
"Call" / "Dial"
"Redial""Tr a n s f e r""Mute""Send"Pair a phone to the system.
Edit the name of a paired phone.
Delete a paired phone from the system.
Hear a list of all phones paired to the system.
Hear which paired phone is linked, and its remaining battery life.
Search for another phone that has been paired.
Set the pairing code to either "Fixed" or "Random."
Say a phone number.
Say a name after a phonebook entry is stored.
Redial the last number called.
Transfer a call from HFL to your phone or from your phone to HFL.
Mute your voice to the person at the other end of the call.
Send numbers or names during a call.

171
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
Phone Setup To pair a cell phone
1. If no phone has been paired to the system before, HFL gives you information
about how to pair the first phone.
If a phone has already been paired: say "Phone Setup" and "Pair" after the HFL
prompts.
2. Follow the HFL prompts and put your phone in discovery or search mode.
HFL gives you a four-digit code and begins searching for your phone.
3. When your phone finds a Bluetooth
® device, select HFL from the options and
enter the four-digit code.
4. Follow the HFL prompts and name the newly paired phone.
To rename a paired phone
1. Say "Phone Setup."
2. Say "Edit" after the prompts.
3. Follow the HFL prompts and rename the phone.
If there is more than one phone paired to the system, HFL will ask you which
phone's name you want to change.
To delete a paired phone
1. Say "Phone Setup."
2. Say "Delete" after the prompts.
3. Follow the HFL prompts.
HFL will ask you which phone you want to delete.
Phone Setup
Press the
button and wait for a beep before
giving a command.
Yo u r Bluetooth-compatible phone must be paired
to HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:
You cannot pair your phone while the vehicle is
tmoving.
Your phone must be in the t

discovery or search
mode when pairing the phone. Refer to your
phone's manual.
Up to six phones can be paired.
tYour phone's battery may drain faster when it is tpaired to HFL.
If your phone is not ready for pairing or not found tby the system within three minutes, the system
will time out and returns to idle.

173
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
Making a Call
You can make calls using any phone number or a name in the HFL phonebook,
and redial the last number called.
Direct dialing a phone number
1. Say "Call" or "Dial."
2. Say the number you want to dial after the prompts.
3. Say "Call" or "Dial" after the prompts. From the HFL phonebook
1. Say "Call" or "Dial."
2. Say the name stored in the HFL phonebook after the prompts.
3. Follow the HFL prompts. To redial the last number called by HFL
Say "Redial." To end a call
Press the
(HFL back) button.
Making a Call
Press the
button and wait for a beep before
giving a command.
HFL uses a Class 2 Bluetooth, with has a maximum
range of about 30 feet (10 meters).
HFL allows you to talk up to 30 minutes after you
remove the key from the ignition switch. However,
this may weaken the vehicle's battery.

191
Continued
Driving
When DrivingStarting the Engine
1. Make sure the parking brake is applied.
Starting the Engine
Keep your foot firmly on the brake pedal when
starting the engine.
The engine is harder to start in cold weather and
in thinner air found at altitudes above 8,000 feet
(2,400 meters).
When starting the engine in cold weather, turn off
all electrical accessories such as the lights, climate
control system, and rear defogger in order to reduce
battery drain.
If exhaust sounds abnormal or you can smell
exhaust gas inside the vehicle, have your vehicle
checked by a dealer. There may be a problem with
the engine or exhaust system.
Automatic transmission models 2. Check that the shift lever is in P
, then
depress the brake pedal.
Although it is possible to start the
vehicle in N
, it is safer to start it in P
.
Manual transmission models 2. Check that the shift lever is in N
. Then
depress the brake pedal with your right
foot, and the clutch pedal with your left
foot.
The clutch pedal must be fully depressed
to start the engine.
Brake Pedal
Brake Pedal Clutch Pedal

Maintenance
This chapter discusses basic maintenance.
Before Performing Maintenance
Inspection and Maintenance .............. 222
Safety When Performing
Maintenance .................................... 223
Parts and Fluids Used in
Maintenance Service ........................ 224
Maintenance Minder
™ ........................ 225
Maintenance Under the Hood
Maintenance Items Under the Hood .. 229
Opening the Hood ............................. 231
Recommended Engine Oil .................. 234
Oil Check ........................................... 235
Adding Engine Oil .............................. 237Engine Coolant .................................. 240
Transmission Fluid .............................. 242
Brake/Clutch Fluid .............................. 244
Refilling Window Washer Fluid ........... 246
Replacing Light Bulbs ......................... 247
Checking and Maintaining Wiper
Blades ................................................ 257
Checking and Maintaining Tires
Checking Tires ................................... 259
Tire and Loading Information Label .... 260
Tire Labeling ...................................... 260
DOT Tire Quality Grading
(U.S. Vehicles)
.................................... 262Wear Indicators .................................. 264
Tire Service Life .................................. 264
Tire and Wheel Replacement ............. 265
Tire Rotation ...................................... 266
Winter Tires ....................................... 267
Battery ................................................. 268
Remote Transmitter Care ................... 269
Replacing the Battery ........................ 269
Climate Control System
Maintenance ..................................... 270
Cleaning
Interior Care ........................................271
Exterior Care ...................................... 273
221

Before Performing Maintenance
Safety When Performing Maintenance
223
Maintenance
Safety When Performing Maintenance
Safety When Performing Maintenance
Some of the most important safety precautions are given here.
However, we cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you should perform a
given task.
Maintenance SafetyTo reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames t
away from the battery and all fuel related parts.
To clean parts, use a commercially available degreaser or parts cleaner, not t
gasoline.
Wear eye protection and protective clothing when working with the battery or t
compressed air.
Engine exhaust contains carbon monoxide, which is poisonous and can kill you. t
Only operate the engine if there is sufficient ventilation.
Vehicle Safet yThe vehicle must be in a stationary condition. t
Make sure your vehicle is parked on level ground, the parking brake is set,
and the engine is off.
Be aware that hot parts can burn you. t Make sure to let the engine and exhaust system cool thoroughly before
touching vehicle parts.
Be aware that moving parts can injure you. t Do not start the engine unless instructed, and keep your hands and limbs
away from moving parts.
WARNING
Improperly maintaining this vehicle or
failing to correct a problem before driving
can cause a crash in which you can be
seriously hurt or killed.
Always follow the inspection and
maintenance recommendations according
to the schedules in this owner's manual.
WARNING
Failure to properly follow maintenance
instructions and precautions can cause
you to be seriously hurt or killed.
Always follow the procedures and
precautions in this owner's manual.

Battery
268Maintenance
Checking the Battery
Check the battery condition monthly. Look
at the test indicator window and check the
terminals for corrosion.
If your vehicle's battery is disconnected or goes dead:
The audio system is disabled. t
Entering the audio security code

P.14 0
The clock resets. t
Setting the Clock

P. 8 8
The navigation system is disabled. A PIN code will be required. t
Refer to the navigation system manual

Charging the BatteryDisconnect both battery cables to prevent damaging your vehicle's electrical
system. Always disconnect the negative (-) cable first, and reconnect it last.
BatteryWARNING: Battery post, terminals, and
related accessories contain lead and lead
compounds.
Wash your hands after handling.The test indicator's color information is on the
battery.
When you find corrosion, clean the battery terminals
by applying a baking powder and water solution.
Rinse the terminals with water. Cloth/towel dry
the battery. Coat the terminals with grease to help
prevent future corrosion.
WARNING
The battery gives off explosive hydrogen
gas during normal operation.
A spark or flame can cause the battery
to explode with enough force to kill or
seriously hurt you.
Wear protective clothing and a face
shield, or have a skilled technician do any
battery maintenance.
Test Indicator Window

269
Remote Transmitter Care
Maintenance
Replacing the Battery NOTICE An improperly disposed of battery can hurt the
environment. Always confirm local regulations for
battery disposal.
Replacement batteries are commercially available or
at a dealer.
Replacing the BatteryIf the indicator does not come on when the button is pushed, replace the battery.
Battery type: CR1616
1. Unscrew the cover with a small Phillips-
head screwdriver. Push a button to pry
open the transmitter.2. Open the keypad.
Wrap the small flat-tip screwdriver
with a cloth to prevent scratching the
transmitter.
3. Make sure to replace the battery with the
correct polarity.
Keypad
Screw
Battery