key Acura TSX 2011 Owner's Guide

Interior Lights/Interior Convenience Items
Interior Convenience Items
126Controls
Interior Convenience Items
Glove Box
Pull the handle to open the glove box. You
can lock the glove box with the master key.
Glove Box
The glove box light comes on when the parking
lights are on.
WARNING
An open glove box can cause serious
injury to your passenger in a crash, even if
the passenger is wearing the seat belt.
Always keep the glove box closed while
driving.
Detachable shelf
The shelf in the glove box is detachable.
To remove it, disengage the tabs.
ShelfGlove Box
To L o c k

170Features
Bluetooth
® HandsFreeLink
®
HFL Menus
"Phonebook"
"Store""Edit""Delete"
"Receive contact"
*
"List"
"Security"
"Change passcode""Call notification""Auto transfer"
"Clear"
"Change language"
*
"Tu t o r i a l"
"Hands-free help""System setup"
Switch the system language between English and French.
Hear a tutorial for general rules on using the system.
Hear a list of available commands and additional information describing each command. Store a phonebook entry.
Edit the number of an existing phonebook entry.
Delete a phonebook entry.
Hear a list of all stored phonebook entries.
Transfer contacts from your phone to HFL.
Change your security passcode.
Set how you want to be notified of an incoming call.
Set to automatically transfer calls from your phone to HFL when you
enter the vehicle. Apply a security passcode to the system that must be input at each
key cycle to access the system.
Clear the system of all paired phones, phonebook entries, and
security passcode.
* Not available on all models

173
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
Making a Call
You can make calls using any phone number or a name in the HFL phonebook,
and redial the last number called.
Direct dialing a phone number
1. Say "Call" or "Dial."
2. Say the number you want to dial after the prompts.
3. Say "Call" or "Dial" after the prompts. From the HFL phonebook
1. Say "Call" or "Dial."
2. Say the name stored in the HFL phonebook after the prompts.
3. Follow the HFL prompts. To redial the last number called by HFL
Say "Redial." To end a call
Press the
(HFL back) button.
Making a Call
Press the
button and wait for a beep before
giving a command.
HFL uses a Class 2 Bluetooth, with has a maximum
range of about 30 feet (10 meters).
HFL allows you to talk up to 30 minutes after you
remove the key from the ignition switch. However,
this may weaken the vehicle's battery.

177
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
System Setup
This command group allows you to change or customize HFL basic settings.
To set a four-digit passcode to lock the HFL system for security
1. Say "System Setup."
2. Say "Security."
3. Follow the HFL prompts and say the four-digit number of your choice.
4. Follow the HFL prompts and confirm the number. To change the security passcode
1. Say "System Setup."
2. Say "Change Passcode" after the prompts.
3. Say the new four-digit passcode after the HFL prompts.
4. Follow the HFL prompts. To select a ring tone or a prompt as the incoming call notification
1. Say "System Setup."
2. Say "Call Notification" after the prompts.
3. Say "Ring Tone" or "Prompt" after the prompts. For no audible notification, say
"O f f."
System SetupPress the
button before a command.
Once a passcode is set, you are required to enter
the passcode with every new key cycle to use HFL.
If you forget the code, go to your dealer to have the
passcode reset. You can also cancel the
passcode by clearing all the data stored in the HFL
system.
To clear the system


P. 17 8
The default setting of the incoming notification is a
ring tone.

Before Driving
182Driving
Driving PreparationCheck the following items before you start driving.
Exterior ChecksMake sure there are no obstructions on the windows, door mirrors, exterior t
lights, or other parts of the vehicle.
Remove any frost, snow, or ice. Remove any snow on the roof, as this can slip down and obstruct your field
of vision while driving. If frozen solid, remove ice once it has softened. When removing ice from around the wheels, be sure not to damage the
wheel or wheel components.
Make sure the hood is securely closed. t If the hood opens while driving, your front view will be blocked.
Make sure the tires are in good condition. t Check air pressures, check for damage and excessive wear.
Checking and Maintaining Tires

P. 2 5 9
Make sure there are no people or objects behind or around the vehicle. t
There are blind spots from the inside.

Exterior Checks NOTICE When doors are frozen shut, use warm water
around the door edges to melt any ice. Do not try
to force them open, as this can damage the rubber
trim around the doors. When done, wipe dry to
avoid further freezing.
Do not pour warm water into the key cylinder.
You will be unable to insert key if the water freezes
in the hole.

192Driving
When Driving
Starting the Engine
3. Turn the ignition switch to START III

without depressing the accelerator pedal.
Starting the Engine
Do not hold the key in START
III
for more than 15
seconds.
If the engine does not start right away, wait for at
tleast 10 seconds before trying again.
If the engine starts, but then immediately stops, twait at least 10 seconds before repeating step 3
while gently depressing the accelerator pedal.
Release the accelerator pedal once the engine
starts.
The immobilizer system protects your vehicle from
theft. If an improperly coded key (or other device) is
used, the engine's fuel system is disabled
Immobilizer System


P. 9 8
Starting to Drive
Automatic transmission models 1. Keeping your right foot on the brake pedal, release the parking brake. Check
that the brake system indicator has gone off.
Parking Brake

P. 2 1 0
2. Put the shift lever in D
. Select R
when reversing.
3. Gradually release the brake pedal and gently depress the accelerator pedal to
pull away.

195
Continued
Driving
When Driving
Shifting
Change the shift position in accordance with your driving need.
Shift lever positions
Shifting
You cannot turn the ignition switch to LOCK
0 and
remove the key unless the shift lever is in
P.
The vehicle may move forward very slightly even in
N
while the engine is cold.
Depress the brake pedal firmly and, when necessary,
apply the parking brake.
Auomatic transmission models Shifting
Park
Used when parking or starting the
engine
Reverse
Used when backing up
Neutral
Used when idling
Drive
Used for:
Normal driving (gears change t
between 1st and 5th automatically)
Temporarily driving in the sequential t
mode
Drive (S)
Used for:
Automatically changing gears t
between 1st and 4th (4th gear is
used only at high speed)
Driving in the sequential mode t
P
R
N
D
S

269
Remote Transmitter Care
Maintenance
Replacing the Battery NOTICE An improperly disposed of battery can hurt the
environment. Always confirm local regulations for
battery disposal.
Replacement batteries are commercially available or
at a dealer.
Replacing the BatteryIf the indicator does not come on when the button is pushed, replace the battery.
Battery type: CR1616
1. Unscrew the cover with a small Phillips-
head screwdriver. Push a button to pry
open the transmitter.2. Open the keypad.
Wrap the small flat-tip screwdriver
with a cloth to prevent scratching the
transmitter.
3. Make sure to replace the battery with the
correct polarity.
Keypad
Screw
Battery

287
Shift Lever Does Not Move
Handling the Unexpected
Automatic transmission models Follow the procedure below if you cannot move the shift lever out of P
position.
1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Wrap a cloth around the tip of a small flat-
tip screwdriver and remove the cover of
the shift lock release slot.
Put the tip of the flat-tip screwdriver
into the slot and remove it as shown in
the image.
4. Insert the key into the shift lock release
slot.
5. While pushing on the key, press the shift
lever release button and place the shift
lever into N
.
The lock is now released. Have the shift
lever checked by a dealer as soon as
possible.
Releasing the Lock
Cover
Slot
Release Button
Shift Lock Release Slot

Fuses
Fuse Locations
295
Continued
Handling the Unexpected
Driver Side Fuse Box
Located under the dashboard.
Fuse Locations
Fuse locations are shown on the label on the side
panel.
Locate the fuse in question by the fuse number and
label number.
Circuit protected and fuse rating
Circuit Protected Amps
1− −
2 Seat Memory (7.5 A)
3 Washer 15 A
4 Wiper 10 A
5 Meter 7.5 A
6 ABS/ VSA 7.5 A
7ACG 15 A
8STS
*1
(7.5 A)
Star ter DIAG
*2
9 Fuel Pump 20 A
10 VB SOL* (10 A)
11 SRS 10 A
12 O D S 7. 5 A
Circuit Protected Amps
13−
*1
(7.5 A)
STS
*2
14 − −
15 Daytime Running Lights 7.5 A
16 A /C 7.5 A
17 Accessory, Key, Lock 7.5 A
18 Acces s or y 7.5 A
19 Driver's Power Seat Sliding (20 A)
20 Moonroof (20 A)
21 Driver's Power Seat Reclining (20 A)
22Rear Driver's Side Power
Window20 A
23Front Accessory Power
Socket20 A
24 Driver's Power Window 20 A
Circuit Protected Amps
25 Driver's Side Door Lock 15 A
26 Left Front Fog Light (10 A)
27Left Side Small Lights
(Exterior)10 A
28 Left Headlight High Beam 10 A
29 TPMS 10 A
30 Left Headlight Low Beam 15 A
31 − −
32 Engine Oil Level
*
(7.5 A)
*1: 4-cylinder models
*2: 6 -cylinder models
* Not available on all modelsFuse Label