Acura TSX 2012 Navigation Manual

119

Map Menu
Traffic Rerouting™
Navigation
Traffic Rerouting™When driving to your destination, the system automatically searches for a faster
route based on traffic flow information and traffic incidents. 2 AcuraLink Real-Time Traffic™
P. 15
2Traffic Rerouting
P. 52
H ENTER button (on map)
 Traffic Incidents
Manually avoid specific incidents and/or congestion on your route: 1.Rotate i to select an incident
from the list. Press u.

The system displays the map
screen and the incident location.
1Traffic Rerouting
This feature requires an AcuraLink Real-Time
Traffic™ subscription.
2 Subscribing to XM® Radio P. 144
AcuraLink Real-Time Traffic™ is a fee-based
subscription service available after a
complimentary 90-day tr ial period. You must
purchase the subscription if you want to
continue receiving the traffic information after
the trial.
Automatic traffic rerouting may not provide a
detour route dependi ng on circumstances.
Traffic information is updated automatically
every one minute.
2 Traffic and Weather Status P. 64
■Traffic Rerouting™ Manually
1 Traffic Rerouting™ Manually
d “Display traffic incidents” , d “Display traffic
list”
You can also display the tr affic incidents from the
INFO screen.
You can display traffic incidents and related
information on the map screen using voice
commands.
2 Map Display Commands P. 236
Continued
TSX_KA-31TL1820.book 119 ページ ２０１１年６月２４日　金曜日　午後３時４３分

120

Map Menu
Traffic Rerouting™
Navigation
2.Press u to select TRAFFIC
DETAIL .
3. Rotate i to select Avoid . Press
u .
Repeat step 1 to 3 as necessary.
4. Move r to select REROUTE .

The system recalculates a detour
route that avoids the traffic
incidents.
1Traffic Rerouting™ Manually
You can choose to avoid up to 10 traffic
incidents. It is not alwa ys possible for the system
to calculate a route that avoids all traffic
incidents or specific traf fic incidents you select.
The “On Route” tab on the Traffic List screen is
only available duri ng route guidance.
You cannot select an inci dent to avoid from the
“All” tab.
You can also detour ar ound a traffic incident
manually if you encounter an unexpected
obstacle or do not have an AcuraLink Real-Time
Traffic™ subscription.
2 Taking a Detour P. 122
TSX_KA-31TL1820.book 120 ページ ２０１１年６月２４日　金曜日　午後３時４３分

121Navigation
Changing Your RouteHMENU button (when en route)
This section describes how to alter your r oute, add an interim “waypoint” (pit stop),
choose a different destination, cancel your current destination, and continue your
trip after stopping.
Rotate i to select an item. Press u.
The following items are available:
• Cancel Route : Cancels the route guidance. 2Canceling the Route
P. 122
• Detour : Calculates a detour route.
2Taking a Detour
P. 122
• Avoid Streets : Avoids streets along your route.
2Avoiding Streets
P. 122
• Change Route Preference : Changes the route preferences (calculating method).
2Changing the Route Preference
P. 91
• Waypoint : Sets waypoints along your route.
2Adding Waypoints from the Route Menu
P. 124
• Destination List : Shows a list of waypoints. You can delete waypoints or edit the
order of them.
2 Editing the Destination List
P. 127
1Changing Your Route
d “Display Menu”, d “Display Navigation”
(when en route)
If you press the MENU button when not en
route, the Destination Me nu screen is displayed.
2 Entering a Destination P. 68
TSX_KA-31TL1820.book 121 ページ ２０１１年６月２４日　金曜日　午後３時４３分

122

Changing Your Route
Canceling the Route
Navigation
Canceling the RouteHMENU button (when en route)
 Cancel Route
Cancel the route guidance and remove th e destination and all waypoints from the
destination list. The system th en returns to the map screen.
Taking a DetourHMENU button (when en route)
 Detour
Calculate a detour route manu ally. The system attempts to calculate a new route by
avoiding the next 5 miles (while on a freeway ) or 1 mile (while on a surface street).
Avoiding StreetsHMENU button (when en route)
 Avoid Streets
Select a street or streets along your route to avoid.
1.Rotate i to select the street you
want to avoid. Press u .

Repeat the procedure to avoid
other streets.

Streets to be avoided are
indicated with a trash icon.
1Canceling the Route
You can also cancel your route from the Map
Menu.
2 Map Menu P. 981Taking a Detour
The detour option is conv enient if you encounter
an unexpected obstacle such as a road closure or
extremely heavy tr affic congestion.1Avoiding Streets
Avoiding certain streets is convenient if you
know of road construction, road closures, or
excessive traffic along the route.
You cannot choose specific streets you want to
use, only those to avoid. However, you can select
intersections or waypoi nts (places/landmarks)
that the system will use in your route.
2 Adding Waypoints P. 123
You can store up to 10 streets to avoid. You
cannot avoid your current st reet or the streets of
your waypoint(s) or dest ination (system beeps if
selected).
TSX_KA-31TL1820.book 122 ページ ２０１１年６月２４日　金曜日　午後３時４３分

123

Changing Your Route
Adding Waypoints
Navigation
2.Move r to select OK.
The system calculates a new
route.
Adding WaypointsAdd up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map
screen as small, numbered red flags.
The route follows the waypoints in
the order they are listed in the
Destination List.
1 Adding Waypoints
Waypoints allow you to stop for gas or food, for
example, and then continue on to your
destination.
Press the MAP/GUIDE button to return to the
map screen without adding a waypoint at any
time.
The search corridor used for adding waypoints
can be adjusted.
2 Edit Waypoint Search Area P. 55
You can delete waypoints or edit the order of
waypoints in the destination list.
2 Editing the Destination List P. 127
TSX_KA-31TL1820.book 123 ページ ２０１１年６月２４日　金曜日　午後３時４３分

124

Changing Your Route
Adding Waypoints
Navigation
HMENU button (when en route)
 Waypoint
1.Rotate i to select a search
method and location to add a
waypoint. Press u.
The following options are available:
• SEARCH AROUND: Searches in a spiral pattern around the location you select.
• SEARCH ALONG : Searches within a “co rridor” on either side of the locations you
select.
2.Rotate i to select a waypoint
category (e.g., GAS STATION).
Press u.
■Adding Waypoints from the Route Menu
1 Adding Waypoints
Search method
“Search around” method
“Search along” method
TSX_KA-31TL1820.book 124 ページ ２０１１年６月２４日　金曜日　午後３時４３分

125

Changing Your Route
Adding Waypoints
Navigation
3.Rotate i to select a place. Press
u .
The waypoint is added to the
Destination List.
4. Move r to select OK.

The route is automatically
recalculated and displayed on
the map screen.
TSX_KA-31TL1820.book 125 ページ ２０１１年６月２４日　金曜日　午後３時４３分

126

Changing Your Route
Adding Waypoints
Navigation
1.Rotate i to select ADD TO Dest.
List . Press u.
2. Rotate i to select a location in
the Destination List. Press u.
3. Move r to select OK.
The route is automatically
recalculated and displayed on
the map screen.
■Adding Waypoints from the Calculate Route Screen
TSX_KA-31TL1820.book 126 ページ ２０１１年６月２４日　金曜日　午後３時４３分

127

Changing Your Route
Editing the Destination List
Navigation
Editing the Destination ListHMENU button (when en route)
 Destination List
Delete or edit the order of waypoints. 1.Move y to select Edit .

Move w to select Map to
display the destination and
waypoints on the map screen.
2. Rotate i to select an item. Press
u .
3. Move r to select OK.

The route is automatically
recalculated and displayed on
the map screen.
The following options are available:
• Delete : Rotate i to select a list item to delete. Press u.
• Edit Order : Rotate i to select a list item to move, press u, rotate i to select
a new location, and press u again.
TSX_KA-31TL1820.book 127 ページ ２０１１年６月２４日　金曜日　午後３時４３分

128Navigation
Changing Your DestinationThere are several methods you can use to change the route destination.Find Nearest PlaceHENTER button (on map)
 Find Nearest…
Search for the nearest place/landmark on the map screen and set it as your
destination.
1.Rotate i to select Find
Nearest… . Press u.
2. Rotate i to select a category
type. Press u.
3. Rotate i to select a place. Press
u .
4. Rotate i to set the place as a
destination or add to the
destination list. Press u.

The system calculates the route. 2Calculating the Route
P. 90
1Find Nearest Point of Interest
d “Find Nearest…” (on map screen)
The Find Nearest voice command is the fastest
method of specifying a pl ace/landmark as your
destination. Many kinds of place/landmark can
be found.
2 Find Place Commands P. 237
TSX_KA-31TL1820.book 128 ページ ２０１１年６月２４日　金曜日　午後３時４３分