ESP Alfa Romeo 4C 2014 Owner handbook (in English)

ENGINE MARKING
This is stamped on the cylinder block
and includes the type and the
manufacturing serial number.
127
A0L0090
155
24-9-2013 11:50 Pagina 155
BODYWORK PAINT
IDENTIFICATION PLATE
It is applied under the tailgate and
shows the following data fig. 127:
APaint manufacturer.
B Colour name.
C Colour code.
D Respray and touch up colour code.

ENGINEGENERAL INFORMATION1750 Turbo Petrol
Type code 960A1000
Cycle Otto
Number and layout of cylinders 4 in line
Piston diameter and travel (mm) 83 × 80.5
Total displacement (cm³) 1742
Compression ratio 9,25 ± 0,25
Maximum power (EEC) (kW) 177 (*)
Maximum power (EEC) (HP) 240
- corresponding engine speed (rpm) 6000
Maximum torque (EEC) (Nm) 350 (*)
Maximum torque (EEC) (kgm) 35,7
- corresponding engine speed (rpm) 2100 - 4000
Spark plugs NGK ILKAR7D6G
Fuel 98 RON or 95 RON (EN228 specification) unleaded petrol(*) Figures obtained using 98 RON unleaded petrol.
157
24-9-2013 11:50 Pagina 157

BRAKESVersionsFront brakesRear brakesParking brake
1750 Turbo Petrol Self-ventilating discs Self-ventilating discs Controlled by hand lever,
acting on the rear brakes
IMPORTANT Water, ice and salt spread on the roads may deposit on the brake discs, reducing braking efficiency the first time
the brakes are applied.
160
TECHNICAL SPECIFICATIONS
24-9-2013 11:50 Pagina 160

READING THE RIM CODE
Example fig. 128:7Jx
17 H2 ET 337rim width in inches (1).Jrim drop centre outline (side
projection where the tyre bead rests)
(2).17
rim fitting diameter in inches
(corresponds to the diameter of the
tyre to be mounted) (3 = Ø).
H2
shape and number of humps
(circumference measurement which
keeps the bead of tubeless tyres
in position on the rim).
ET 33
wheel camber (distance between
the disc/rim support plane and
the wheel rim centre line).RIM PROTECTOR TYRES
136)
WARNING
136) DO NOT fit hub caps when
using integral hub caps fixed (with
springs) to the steel rim and
after-sale tyres provided with Rim
Protector (fig. 129). The use of
unsuitable tyres and hub caps
may cause sudden loss of tyre
pressure.129
A0L0115
164
TECHNICAL SPECIFICATIONS
24-9-2013 11:50 Pagina 164

RIMS AND TYRES PROVIDED
137)
RimsTyres provided Snow tyres
Front tyres 7JX17 H2 ET 33
205/45 R17 88Y205/45 R17 88Y M+S
7JX18 H2 ET 33 205/40 R18 86Y205/40 R18 86Y M+S
Rear tyres 8JX18 H2 ET 44
235/40 R18 95Y235/40 R18 95Y M+S
8.5JX19 H2 ET 49 235/35 R19 91Y235/35 R19 91Y M+S
Reduced size snow chains with a maximum projection of 7 mm beyond the tyre profile can be fitted on cars equipped with
235/40 R18 rear tyres.
WARNING
137) If winter tyres with a lower speed rating than that indicated in the Registration Document are used, do not exceed the maximum speed corresponding to the speed rating of the tyres used.
165
24-9-2013 11:50 Pagina 165

DIMENSIONSDimensions are expressed in mm and refer to the car equipped with its standard-supplied tyres. Height is measured with car
unladen.
LUGGAGE COMPARTMENT VOLUMEUnladen capacity (V.D.A. standards): = 110 dm
3
AB C D E FGH L
3990 864 2380 746 1184 1639 1868 1606 2090
Small variations with respect to the reported values are possible depending on the dimensions of the rims.130
A0L0119
167
24-9-2013 11:50 Pagina 167

WEIGHTSVersions1750 Turbo Petrol
Unladen weight (with all fluids, fuel tank
90% full and without optional equipment): 920
Payload including the driver: (*) 255
Maximum permitted loads (**)
– front axle: 490
– rear axle: 755
– total: 1175
Towable loads (kg)
- braked trailer: 0
- non-braked trailer: 0
Maximum load on roof: 0
Maximum load on ball joint (braked trailer): 0(*) If special equipment is fitted, the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment within the maximum permitted loads.
169
24-9-2013 11:50 Pagina 169

PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF
ITS LIFEFor years, Alfa Romeo has pursued a global commitment to protect and respect the environment by continually improving its
production processes and developing increasingly eco-compatible products. To ensure its customers the best possible service
in compliance with environmental standards and in response to obligations arising out of European Directive 2000/53/EC on
end of life vehicles, Alfa Romeo offers its customers the chance to hand back their vehicles (*) at the end of their life cycle at no
additional cost.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any expenses
as a result of its market value. In particular, in almost all European Union countries, until 1 January 2007, vehicles registered
after 1 July 2002 will be collected free of charge, whilst from 2007 collection will be free of charge irrespective of the year of
registration as long as the vehicle contains its basic components (in particular, the engine and bodywork) and has no additional
waste.
To hand your vehicle over at the end of its life without extra cost, contact one of our dealerships or an Alfa Romeo authorised
collection and scrapping centre. These centres have been carefully chosen to offer high quality service for the collection,
treatment and recycling of vehicles at their end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from dedicated Alfa Romeo Dealerships, by
calling the freephone number 00800 2532 4200 or on the Alfa Romeo website.
(*) Vehicle for transporting passengers with a maximum of nine seats and a total permitted weight of 3.5 t
176
TECHNICAL SPECIFICATIONS
24-9-2013 11:50 Pagina 176