technical specifications Alfa Romeo Giulietta 2015 Owner's Guide
[x] Cancel search | Manufacturer: ALFA ROMEO, Model Year: 2015, Model line: Giulietta, Model: Alfa Romeo Giulietta 2015Pages: 288, PDF Size: 7.34 MB
Page 242 of 288
RIMS AND TYRES PROVIDED AS STANDARD
Versions Rims Tyres provided Snow tyresSpace-saver wheel
Rim Tyre
1.4 Turbo
Petrol
MultiAir
M
M
7Jx16 H2 ET 41 (*)195/55 R16 91V
REINFORCED (*)195/55 R16 91Q
REINFORCED (*)
T135/70 R16
100M
T125/80 R17
99M4Bx16ET22
4Bx17ET25 7Jx16 H2 ET 41 205/55 R16 91V 205/55 R16 91Q
7 1/2 Jx17 H2 ET 41 225/45 R17 91W 225/45 R17 91Q
7 1/2 Jx18 H2 ET 41
(*)225/40 R18 92W
REINFORCED (*) (**)225/40 R18 92Q
REINFORCED
1.4 Turbo
Petrol(***)
MultiAir(***)
1.6 JTD
M(***)
2.0 JTD
M(***)7 1/2 Jx17 H2 ET 41 225/45 R17 91W 225/45 R17 91Q
T125/80 R17
99M4Bx17ET25
7 1/2 Jx18 H2 ET 41225/40 R18 92W
REINFORCED (**)225/40 R18 92Q
REINFORCED
1750 Turbo
Petrol(*)7 1/2 Jx17 H2 ET 41 225/45 R17 91W 225/45 R17 91Q
T125/80 R17
99M4Bx17ET25
7 1/2 Jx18 H2 ET 41225/40 R18 92W
REINFORCED (**)225/40 R18 92Q
REINFORCED
(*) For versions/markets, where provided
(**) Tyres which cannot be fitted with chains
(***) Versions with oversized brake calipers
On versions with 195/55 R16", 205/55 R16" e 225/45 R17" tyres, reduced size snow chains can be used, with a maximum
projection of 9 mm beyond the tyre profile.
238
TECHNICAL SPECIFICATIONS
1.4 Turbo
2.0JTD 1.6JTD
1.4Turbo
Page 244 of 288
DIMENSIONS
Dimensions are expressed in mm and refer to the vehicle equipped with its original tyres. Height is measured with car unladen.
BOOT VOLUMEUnladen capacity (V.D.A. standards): = 350 dm
3
AB C D EFGH
4351 955 2634 762 1465 1554 1798 1554
Small variations in size are possible depending on the dimensions of the rims
201A0K0822
240
TECHNICAL SPECIFICATIONS
Page 246 of 288
WEIGHTS
Weights 1.4 Turbo Petrol
1.4 Turbo MultiAir(*) 1.4 Turbo MultiAir(**)
Unladen weight (with all fluids, fuel tank
filled to 90% and without optional
equipment)1280 1290 1305
Payload including the driver (***) 505 505 505
Maximum permitted loads (****)
1100 1100 1100 – front axle
– rear axle 850 850 850
– total 1785 1795 1810
Towable loads (kg)
1300 1300 1300 / 0 (****) - braked trailer
– trailer without brakes 500 500 500
Maximum load on roof 50 50 60
Maximum load on tow hitch (trailer with
brakes)60 60 60
(*) Versions with manual gearbox
(**) Versions with Alfa TCT
(***) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(****) Hot-humid climate countries
242
TECHNICAL SPECIFICATIONS
Page 248 of 288
Weights
2.0 JTDM(*) 2.0 JTDM(**)
Unladen weight (with all fluids, fuel tank filled to
90% and without optional equipment)1320 1335
Payload including the driver (***) 505 505
Maximum permitted loads (****)
1100 1100 – front axle
– rear axle 850 850
– total 1825 1840
Towable loads (kg)
1300
1300 / 600 (*****) - braked trailer
– trailer without brakes 500 500
Maximum load on roof 50 50
Maximum load on tow hitch (trailer with brakes) 60 60
(*) Versions with manual gearbox
(**) Versions with Alfa TCT
(***) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(****) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted
loads.
(*****) 2.0 JTD
M163 HP TCT versions
244
TECHNICAL SPECIFICATIONS
Page 250 of 288
1750 Turbo Petrol 235 HP (*)
Prescribed fuels and original
lubricants
litres kg
Fuel tank 60 –
Unleaded petrol not less than 95
RON (EN 228 specification)
including a reserve of 8 - 10 –
Engine cooling system (with climate
control)6,4 5,7Mixture of 50% demineralised water
and 50% PARAFLU
UP(***)
Engine sump 5,0 4,25
SELENIA SPORT POWER
Engine sump and filter 5,1 4,35
Automatic transmission casing 2,0 1,7TUTELA TRANSMISSION
GEARFORCE
Hydraulic brake circuit with ABS (Anti-
lock braking system)0,83 0,78 TUTELA TOP 4
Windscreen/rear window/headlight
washer fluid reservoir (**)2,8 (4,6) 2,5 (4,1)Mixture of water and TUTELA
PROFESSIONAL SC 35
(*) For versions/markets, where provided
(***) For particularly harsh climate conditions, a mixture of 60%
UPand 40% demineralised water is recommended. (**) Values in brackets refer to versions with headlight washers
246
TECHNICAL SPECIFICATIONS
Page 252 of 288
FLUIDS AND LUBRICANTS
Your car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
PRODUCT SPECIFICATIONS
248
TECHNICAL SPECIFICATIONS
UseFluid and lubricant features for a correct use
of the carGenuine fluids and
lubricantsReplacement interval
Lubricant for
petrol engines
(1.4 Turbo Petrol
versions)
41)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant
FIAT 9.55535-S2 ificationSELENIA StAR P.E.
Contractual Technical
Reference No. F603.D08According to the
Scheduled Servicing
Plan
Lubricant for
petrol engines
versions)SAE 0W-30 ACEA C2grade totally synthetic
lubricant
FIAT 9.55535-S2specificationSELENIA P.E.
Contractual Technical
Reference No. F020.B12According to the
Scheduled Servicing
Plan
DIGITEK
(1.4 Turbo MultiAir
41)
spec
Page 253 of 288
UseFluid and lubricant features for a correct use
of the carGenuine fluids and
lubricantsReplacement interval
Lubricant for
petrol engines (for
1750 Turbo petrol
versions only)
41)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant
FIAT 9.55535-GH2specificationSELENIA SPORT
POWER
Contractual Technical
Reference No. F052.H12According to
Scheduled Servicing
Plan
Lubricant for
diesel engines
41)
SAE 0W-30 ACEA C2 grade totally synthetic
lubricant
FIAT 9.55535-DS1specificationSELENIA WR
FORWARD
Contractual Technical
Reference No. F842.F13According to
Scheduled Servicing
Plan
In case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated
ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed.
For MultiAir system engines only use lubricants withindicated SAE gradeand specifications.
IMPORTANT
41) The use of products with different specifications than those indicated above could cause damage to the engine that
is not covered by the warranty.
249
Page 254 of 288
UseFluid and lubricant features for a correct use
of the carGenuine fluids and
lubricantsApplications
Lubricants and
greases for drive
transmissionSAE 75W grade synthetic lubricant.
FIAT 9.55550-MZ6 classificationTUTELA
TRANSMISSION
GEARFORCE
Contractual Technical
Reference No. F002.F10Gearboxes and
differentials
(mechanical)
Molybdenum disulphide grease, for use at high
temperatures. NL.G.I. 1-2 consistency
FIAT 9.55580 classificationTUTELA ALL STAR
Contractual Technical
Reference No. F702.G07Wheel side constant
velocity joints
Grease for constant velocity joints with low friction
coefficient. NL.G.I. 0-1 consistency
FIAT 9.55580 classificationTUTELA STAR 700
Contractual Technical
Reference No. F701.C07Differential-side
constant velocity joints
Lubricant for
electro-hydraulic
actuator (versions
with Alfa TCT)Fully synthetic oil with dedicated additive
FIAT 9.55550-SA1 classificationTUTELA CS SPEED
Contractual Technical
Reference No. F005.F98Lubricant for electro-
hydraulic actuator
Brake fluidSynthetic fluid for brake and clutch systems.
Exceeds specifications: FMVSS no. 116 DOT 4,
ISO 4925, SAE J1704.
FIAT 9.55597 classificationTUTELA TOP 4
Contractual Technical
Reference No. F001.A93Hydraulic brakes and
hydraulic clutch
controls
250
TECHNICAL SPECIFICATIONS
Page 255 of 288
UseFluid and lubricant features for a correct use
of the carGenuine fluids and
lubricantsApplications
Protective agent
for radiatorsRed protective agent with antifreeze action, based
on inhibited monoethylene glycol with organic
formula. Exceeds the CUNA NC 956-16, ASTM D
3306 specifications.
FIAT 9.55523 classificationPARAFLUUP(*)
Contractual Technical
Reference No. F101.M01Usage percentage:
50% demineralised
water 50%
PARAFLU
UP(**)
Diesel fuel
additiveAntifreeze additive for diesel, with protective action
for diesel engines.TUTELA DIESEL ART
Contractual Technical
Reference No. F601.L06To be mixed with diesel
(25 cc per 10 litres)
Windscreen/rear
window/headlight
washer fluidMixture of alcohol, water and surfactants CUNA
NC 956-11
FIAT 9.55522 classificationTUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference No. F201.D02To be used diluted or
undiluted in screen
washer/wiper systems
(*)IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.
(**)When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60%PARAFLUUPand 40% demineralised water.
251
Page 256 of 288
FUEL CONSUMPTION
The fuel consumption figures given in the tables below are determined on the basis of the type-approval tests laid down by
specific European Directives.
The procedures below are followed for measuring consumption:
❒urban cycle: cold starting followed by driving that simulates urban use of the car;
❒extra-urban cycle: frequent accelerating in all gears, simulating extra-urban use of the car: speed varies between 0 and 120
km/h;
❒combined fuel consumption: calculated with a weighting of approximately 37% of the urban cycle and 63% of the extra-
urban cycle.
IMPORTANT The type of route, traffic conditions, weather conditions, driving style, general condition of the car, trim level/
equipment/accessories, use of the climate control, car load, presence of roof racks and other situations that adversely affect
the aerodynamics or wind resistance lead to different fuel consumption figures than those measured.
252
TECHNICAL SPECIFICATIONS