GETTING TO KNOW YOUR CAR
110fig. 119
A0A9017i
The gearbox can work according to two op-
erating modes:
– the first is semi-automatic (hereinafter
calledMANUAL), in which the driver shifts
gear directly using the lever on the central
console or the levers on the steering wheel
spokes;
– the second is automatic, called CITY
(when selecting CITYwith button B-fig.
117, the word CITYwill be displayed fig.
119). In this mode the system decides di-
rectly when to shift gear. SELESPEED
TRANSMISSION
(on request for versions/markets
where applicable)
IMPORTANTTo be able to use the Se-
lespeed correctly, this chapter should be read
in full to understand the correct, permissible
operations to be carried out right from the
start.
This device comprises a conventional me-
chanical transmission, to which an elec-
tronically-controlled electrohydraulic device
has been added, which automatically con-
trols the clutch and gear engagement.
The clutch pedal has been eliminated and
the car moves off using only the accelerator
pedal.Gearshifting takes place through a floating
control lever (A-fig. 117) with “only one
stable central position”. Using this lever it is
possible to request increase/decrease of the
ratio of the gear engaged and/or engage-
ment of reverse gear (R) or neutral (N).
There are also two levers on the steering
wheel spokes (fig. 118) through which,
only with the car on the move (with speed
above 0,5 km/h), it is possible to in-
crease/decrease the gear engaged.
fig. 117
A0A0697b
fig. 118
A0A0669b
