display Alfa Romeo GT 2010 Owner handbook (in English)

GETTING TO KNOW YOUR CAR
156
TA function
(traffic information)
Certain stations in the FM band (FM1,
FM2 and FMT) are enabled to also broad-
cast information about traffic conditions. In
this case the display shows “TP”.
To turn the TA (traffic announcement) func-
tion on/off, briefly press button MENU and
then select “TA ON” or “TA OFF”.
IMPORTANTIf the TA function (traffic
information) is on, with CD, CD Changer (if
installed), Telephone or Mute/Pause active:
automatic station tuning will start.
With the TA function it is possible:
– to search only RDS stations that trans-
mit in the FM band, enabled to broadcast
traffic information;
– to receive traffic information although
CD player or CD Changer are being used;
– to receive traffic information at a pre-
defined minimum volume even with the ra-
dio volume off. IMPORTANTIn certain countries radio
stations exist which, even if the TP function
is on (the display shows “TP”), do not trans-
mit traffic information.
If the radio is working in the AM band,
when TA is activated, it passes to the FM1
band on the last station heard.
The volume with which the traffic bulletin
is transmitted varies depending on the lis-
tening volume:
– listening volume below 20: traffic bul-
letin volume = 20 (fixed value);
– listening volume above 20: traffic bul-
letin volume = listening volume +1.
If the volume is changed during a traffic
bulletin the value is not shown on the dis-
play and the new value is kept only for the
bulletin in progress.
The TA function is interrupted by pressing
any sound system button. AF function
(alternative frequency search)
Within the RDS system the radio can work
in two different modes:
– “AF ON”: alternative frequency search
on (the display shows “AF”);
– “AF OFF”: alternative frequency search
off.
With “AF ON”, the radio is automatically
tuned to the station with the strongest sig-
nal that is broadcasting the same pro-
gramme. During the journey it will thus be
possible to continue listening to the station
chosen without having to change the fre-
quency when changing area.
Of course, the station being listened to
must be receivable in the area the car is
crossing.
To turn the AF function on/off, press but-
ton MENU, and then select “AF ON” or “AF
OFF”. If the AF function has been turned on
the display shows “AF”.
If the radio is working in the AM band,
when the AF function is activated, it pass-
es to the FM1 band on the last station se-
lected.

GETTING TO KNOW YOUR CAR
157
The display will show the current status
of the function:
– “REG ON”: function on.
– “REG OFF”: function off.
If the function is off and a regional pro-
gramme is tuned that works in a determi-
nate area and the car enters a different area,
the regional station of the new area is re-
ceived.
IMPORTANTIf AF and REG are both ac-
tive, when passing from one region to an-
other the radio could not tune properly to
a valid alternative frequency. MP3 DISP function
(MP3 CD data display)
With this function it is possible to choose
the information shown on the display, when
listening to a MP3 CD.
This function can be selected only if a MP3
CD is loaded: in this event the display shows
“MP3 DISP”.
To change the function use buttons
÷
or˜.
The display shows the setting among the
six possible:
– TITLE (track title, if ID3-tag available)
– AUTHOR (track author, if ID3-tag avail-
able)
– ALBUM (album title, if ID3-tag available)
– DIR (directory name);
– FILENAME (MP3 file name);
– TIME (time elapsed from start of track). REG function
(regional broadcast reception)
Certain national broadcasters, at determi-
nate times of the day, transmit regional pro-
grammes which differ from region to region.
This function makes it possible to tune in on-
ly on local stations (regional) (see para-
graph “EON function”).
Activate this function if you want to tune
automatically to regional stations broad-
casting in the selected band.
To turn the function on/off use button
÷or˜.

GETTING TO KNOW YOUR CAR
158
EXT function
(external audio source control)
With this function it is possible to adjust
(setting from 0 to 40) or exclude (OFF) ex-
ternal audio sources.
To turn this function on/off, use button
÷or˜.
The display will show the current status
of the function:
– “EXT VOL”: function on.
– “EXT OFF”: function off.
– “EXT 23”: function on with volume lev-
el 23.
IGN TIME function
(system power on/off mode radio)
This function enables to switch off the
sound system according to two different
modes. To turn the function on use button
÷or˜.
The display will show “IGN TIME” and then:
– “00 MIN”: deactivation dependent on
ignition key. Sound system will switch off
automatically when turning the ignition key
to STOP;
– “20 MIN”: deactivation independent of
ignition key. After having turned the ignition
key to STOP the sound system will stay on
for 20 minutes max.IMPORTANTWhen the sound system
is switched off automatically after turning
the ignition key to STOP (for both immedi-
ate or 20-minute delayed power off), it will
switch on automatically turning the ignition
key to MAR. If the sound system has been
switched off pressing button ON, when turn-
ing the key to MAR it will stay off.
RESTORE function
This function enables to restore default set-
tings. Options available are the following:
– NO: no restore;
– YES: restore default settings. During this
operation the display will show the message
“RESTORE”. At the end of this operation,
the audio source will not be changed and
the previous situation is displayed. SVC function
(volume changing with speed)
(excluding versions with
Bose HI-FI system)
This function makes it possible to auto-
matically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the noise
level inside the passenger compartment.
To turn the function on/off use button
÷or˜. The display will show the cur-
rent status of the function:
– SVC OFF: function off
– SVC LOW: function on
(low sensitivity)
– SVC HIGH: function on
(high sensitivity).

GETTING TO KNOW YOUR CAR
160
Select track
(forward/backward)
Briefly press button
÷to play the pre-
vious track and button
˜to play the next
one. Tracks are played in sequence: after the
last track, the first one will be played and
vice versa.
If playing the track started more than 3
seconds ago, pressing briefly button
÷
the track is played again from the start. In
this case if wanting to play the previous
track, press the button twice consecutively.
Fast forward/backward
Keep button
˜pressed to move the
track selected forward at high speed and
keep button
÷pressed to move it quick-
ly backward. Fast forward/backward is
stopped once the button is released. Pause function
To pause the CD player, press button
MUTE. The display will show “PAUSE”.
To resume playing the track, press button
MUTE again.
The pause function is deactivated chang-
ing the sound source. Possible error messages
If the CD inserted is illegible (e.g.: CD-ROM
inserted, CD not inserted properly or read-
ing error), the display will show the mes-
sage “CD ERROR” for about 2 seconds.
The CD is then ejected and the previous
source before CD was selected returns.
Display information
When the CD player is working, the dis-
play shows the following information which
means:
“T05”: shows the number of the track on
the CD;
“03:42”: shows the time elapsed since
the start of the track (if the corresponding
Menu function is on);

GETTING TO KNOW YOUR CAR
161
Entering the secret code
When turning the sound system on (in the
event of code request), the display will show
the word “CDC CODE” for about 2 seconds,
followed by four dashes “- - - -”.
The secret code comprises four figures from
1 to 6, each corresponding to one of the
dashes.
To enter the first digit of the code, press
the corresponding key of the preset stations
(from 1 to 6). Enter the other code digits in
the same way.
If the four figures are not entered within
20 seconds, the display shows the word
“CDC CODE” for 2 seconds and then fours
dashes “- - - -”. This is not to be considered
as an incorrect code entry.
After entering the fourth digit (within 20
seconds), the radio starts working.
If a wrong code is entered, the radio
sounds a beep, the display shows the word
“CDC CODE” for 2 seconds and then fours
dashes “- - - -” to warn the user that it is nec-
essary to enter the correct code. Every time the user enters a wrong code,
the waiting time increases gradually (1 min,
2 min, 4 min, 8 min, 16 min, 30 min,1h,
2h, 4h, 8h, 16h, 24h) until reaching a max-
imum of 24 hours. The waiting time will
be shown on the display with the word “CDC
WAIT”. When this goes off it is possible to
start the new code entry procedure.
Code Card
This the document that certifies possession
of the radio. The Code Card contains the ra-
dio model, serial number and secret code.
IMPORTANTKeep the Code Card care-
fully to be able to give the related data to
the competent authorities in the event of
theft. Antitheft protection
The radio is fitted with an antitheft pro-
tection system based on the exchange of in-
formation between the radio and the elec-
tronic control unit (Body Computer) installed
on the car.
This system warrants the highest level of
security and prevents entry of the secret
code every time the radio supply is discon-
nected.
If the result of the check is positive, the set
starts working, whereas if the comparison
codes are not the same or if the electronic
control unit (Body Computer) is replaced,
the device informs the user of the need to
enter the secret code according to the pro-
cedure described in the following paragraph.

GETTING TO KNOW YOUR CAR
162
Technical data and operating conditions for
MP3 files are as follows:
– adopted CD-ROM shall be mastered ac-
cording to ISO9660 Standard;
– music files shall be renamed as “.mp3”
otherwise they cannot be played;
– sampling frequencies are: 44.1 kHz,
stereo (96 to 320 kbit/s) - 22.05 kHz,
mono or stereo (32 to 80 kbit/s);
– it is possible to play variable bit-rate
tracks (files).
IMPORTANTCharacters: blank, ‘ (apos-
trophe), ( and ) (open and closed brackets)
are not admitted in MP3 track names. When
sampling MP3 CD you must not use these
characters to name files otherwise the sound
system will not be able to play it. DISPLAY INFORMATION
ID3-tag info display
(track informations)
In addition to time elapsed, directory name
and file name, also ID3-tag info relevant to
track Title, Artist, Author (see section “MP3
disp function”) are displayed.
The MP3 directory name shown on the dis-
play corresponds to the name with which
the directory is stored on the CD, followed
by an asterisk.
Example of full MP3 directory name: BEST
OF *.
If you want to display one ID3-tag info (Ti-
tle, Artist, Album) and the track being played
has no ID3-tag info then, the file name will
be displayed.
MP3 CD PLAYER
(where provided)
Introduction
This section only describes MP3 CD play-
er operation variants: as concerns sound sys-
tem operation, refer to “Functions and Ad-
justments” paragraph.
NOTEMPEG Layer-3 audio decoding tech-
nology licensed from Fraunhofer IIS and
Thomson multimedia.
MP3 mode
In addition to standard audio CDs, the sound
system can also play audio files in MP3 for-
mat. Sound system will operate as described
in “Compact Disc player” paragraph when in-
serting a conventional audio CD.
For optimal playing use only top quality
CDs mastered at a speed as low as possible.
MP3 CD files are structured by directories,
with sequential lists of all directories con-
taining MP3 tracks (directories and sub-di-
rectories are all brought to the same lev-
el), directories not containing MP3 tracks
cannot be selected.

GETTING TO KNOW YOUR CAR
163
CD CHANGER (CDC) Possible error messages
Error messages will be displayed in the fol-
lowing cases:
– no CD in the CD Changer: the display
will show “CD ERROR” until changing the
sound source;
– selected CD is illegible (CD not in the se-
lected position or CD not inserted properly):
the display shows “CD ERROR” after the
number of the selected CD. The next CD will
be selected; if there are no other CDs or if
they are also illegible the display will show
the wording “NO CD” until the sound source
is changed;
– error in CD reading: the display shows
“CD ERROR”. The next CD will be selected;
if there are no other CDs in the CD Chang-
er (after the last CD search will restart from
the first one) or they are also illegible, if the
sound source is not changed, the display will
show the following:
❒“CHANGER” for about 2.5 seconds;
❒“CD ERROR” for about 5 seconds;
❒plays next source for other 5 seconds;
– a CD-ROM is inserted: next CD will be
selected. Select next/previous directory
Press button
▲to select the next directo-
ry or press button
▼to select the previous
one. The name of the new selected direc-
tory will be shown on the display.
Directories are selected in cyclic sequence:
after the last directory the first one is se-
lected and vice versa.
If no other directory/track is selected in
the following 2 seconds, the first track in the
new directory will be played.
If the last track in the currently selected di-
rectory is played, the next will then be
played.
Protection against theft
Refer to “Compact Disc player” paragraph.Installation and connec-
tion of a Lineaccessori CD
Changer shall only be per-
formed by Alfa Romeo Authorized
Services.
Introduction
This section only describes CD Changer
(where provided) operation variants: as con-
cerns sound system operation, refer to
“Functions and adjustments” paragraph.
Selecting the cd changer
Turn on the set, then press briefly and re-
peatedly button CD until selecting “CHANG-
ER”.

GETTING TO KNOW YOUR CAR
164
TROUBLESHOOTING
Overview
Low volume
The Fader function shall only be set to “F”
(front), to prevent sound system output
power reduction and volume muting if the
Fader level set is = R+9.
Required source cannot be
selected
No CD loaded. Load the CD or the MP3 CD
you want to play. Compact disc player
CD not played
Loaded CD is dirty. Clean the CD.
Loaded CD is scratched. Try to play another
CD.
Required CD cannot be loaded
Another CD is already loaded. Press button
˚and remove the CD.
MP3 file reading
Skipping when reading MP3 files
Loaded CD is scratched or dirty. Clean the
CD as described in “CD” voice in “Advise”
paragraph.
MP3 track length not displayed
correctly
In certain cases (due to recording) MP3
track length can be displayed incorrectly. Selecting the CD
Press button
▲to select the next CD and
button
▼to select the previous CD.
If the loader does not contain a disc in the
position selected, the display briefly shows
the wording “CD ERROR”, and the next CD
is played automatically.

GETTING TO KNOW YOUR CAR
168
Diesel Particulate Filter clogged
When the diesel particulate filter is
clogged, the display shows symbol
h
+ message. In this event keep the engine
running until symbol
hand message
turn off. Reclaiming procedure is controlled auto-
matically by the engine control unit accord-
ing to the filter conditions and the conditions
of use of the car. During reclaiming the fol-
lowing phenomena could take place: idling
slight increase, fan activation, slight smoke
increase, high exhaust temperatures.
These situations shall not be considered as
faults and they do not affect car perfor-
mance and environment.

CORRECT USE OF THE CAR
170
STARTING PROCEDURE
FOR JTD VERSIONS
1) Make sure the handbrake is engaged.
2) Set the gearshift lever to neutral.
3) Turn the ignition key to MAR. The re-
configurable multifunction display will show
the
mwarning light.
4) Wait for the
mto turn off, which
takes place sooner, the warmer the engine.
With the engine very warm the light might
stay on for such a short time as to pass un-
noticed.
5) Fully depress the clutch pedal.
6) Turn the ignition key to AV Vas soon
as the
mwarning light has gone out.
Waiting too long, makes the warming work
of the glow plugs useless.IMPORTANTThe electric devices that
absorb a high amount of energy (climate
control, rearscreen heating, etc.) are cut off
automatically during starting.
If the engine does not start at the first at-
tempt, move the ignition key to STOPbe-
fore repeating starting.
If starting is difficult (with the Alfa Romeo
CODE system working properly), do not in-
sist with prolonged attempts.
Only use an auxiliary battery if the cause
is due to low battery charge. Never use a
battery charger to start the engine.
WARMING THE ENGINE
– Drive off slowly, at medium revs with-
out accelerating abruptly.
– Do not drive at full performance for the
initial kilometres of the journey. Wait until
the engine coolant temperature reaches 50-
60 °C.