Power Alfa Romeo MiTo 2012 Owner handbook (in English)
[x] Cancel search | Manufacturer: ALFA ROMEO, Model Year: 2012, Model line: MiTo, Model: Alfa Romeo MiTo 2012Pages: 262, PDF Size: 6.46 MB
Page 122 of 262

GETTING TO KNOW YOUR CAR121
1RADIO WIRING SYSTEM
(for versions/markets, where provided)
If no radio was requested at the time of purchase, the vehicle is
provided with a double oddment compartment on the dashboard
fig. 78.
The radio wiring system is composed of:
❍radio power supply cables, front and rear loudspeakers and
an aerial;
❍car radio housing;
❍an aerial on the vehicle roof.
fig. 78A0J0087m
The radio should be fitted in the dedicated compartment
A-fig. 78 , which should be removed by pressing on the two retaining
tabs in the compartment: the power supply cables can be found
here.
When connecting a car radio to the radio wiring
contact an Alfa Romeo Authorised Service to pre-
vent any faults from occurring that might com-
promise the safety of your vehicle.
Page 179 of 262

178IN AN EMERGENCY
CHANGING A BULB
GENERAL INSTRUCTIONS
❍Before changing a bulb check the contacts for oxidation;
❍blown bulbs must be replaced with others of the same type and
power;
❍After replacing a headlight bulb, always check its alignment;
❍When a bulb is not working, check that the corresponding fuse
is intact before replacing it: refer to the “Replacing fuses” para-
graph in this section for the location of fuses.
BULB TYPES fig. 21
The vehicle has the following light bulbs:
A. All glass bulbs: clipped into place. Pull to extract.
B. Bayonet bulbs: to remove this type of bulb from its holder, press
the bulb and turn it anticlockwise.
C. Cylindrical bulbs: release from the contacts to extract.
D. Halogen bulbs: release the fastening clip from the corresponding
seat to remove the bulb.
E. Halogen bulbs: release the fastening clip from the corresponding
seat to remove the bulb.
fig. 21A0J0117m
Page 180 of 262

5/21W
–
55W
55W
D1S
21W
21W
5W
–
–
5W
55W
21W
21W
10W
5W
5W
5WA
–
D
D
–
B
B
A
–
–
A
E
B
B
C
A
C
A
IN AN EMERGENCY179
4
W21/5W
LED
H7
H7
F
WY21W
P21W
W5W
LED
LED
W5W
H1
P21W
P21W
C10W
W5W
C5W
W5W
Bulb Type Power Ref. figure
Front side lights/Daylight lights
Rear side lights
Dipped beams
Main beams
Dipped beams/Main beams (versions with Bi-xenon
headlights) (for versions/markets, where provided)
Front direction indicators
Rear direction indicators
Side direction indicators
Brake light
3rd brake light
Number plate light
Fog lights
Rear fog lights
Reversing light
Front courtesy light
luggage compartment courtesy light
Glove compartment courtesy light
Door lights
Page 189 of 262

188IN AN EMERGENCY
If the fuse blows again contact an Alfa Romeo
Authorised Services.
Never replace a blown fuse with anything other
than a new fuse.
Under no circumstances should a fuse be replaced
with one of a higher amperage; FIRE RISK.
If a general protection fuse for safety systems
(air bag system, braking system), power unit sys-
tems (engine system, transmission system) or
steering system is triggered, contact Alfa Romeo Autho-
rized Services.
If a general protection fuse blows contact an Alfa
Romeo Authorised Services.
Before replacing a fuse, make sure you have re-
moved the key from the ignition and have turned
off and/or unplugged all energy-consuming
devices.
If a general protection fuse (MEGA-FUSE, MIDI-
FUSE, MAXI-FUSE) is activated, contact an Alfa
Romeo Authorised Services.
Page 196 of 262

43
43
45
45
45
45
45
45
41
41
415
5
15
10
15
20
–
15
40
15
7.5F51
F53
F4
F5
F6
F1
F2
F3
F83
F85
F87
IN AN EMERGENCY195
4
CONSUMERS FUSE AMPERE FIGURE
Clutch switch, Brake light
switch, relay coils on
engine fuse box, Control system on
internal heater/air conditioning unit,
Blue&Me
TMcontrol unit,
Radio wiring, Air flow meter,
Water in diesel fuel sensor
Instrument panel
Bose HI-FI system amplifier control unit
Bassbox subwoofer in spare wheel compartment
Left and right front seat heater
Electric sunroof opening system
Fuse wiring
Luggage compartment power socket
Passenger compartment fan
Power socket on tunnel
Passenger/driver-side door mirror demister,
Demister on front jets, Heated windscreen relay coil
Page 201 of 262

200IN AN EMERGENCY
The power brakes and the electrical power steer-
ing will not work while the car is being towed. More
effort on the brake pedal and steering wheel will
therefore be required. Do not use wires for towing. Do not
jerk. Be careful not to damage parts in contact with the
car while towing. Respect the specific rules of the Highway
Code when towing the car, specifically in relation to the
towing device and conduct on the road. Do not start the
engine while towing the car. Clean the threaded seat care-
fully before fastening the hook. Make sure that the hook
is fully fastened in the seat before towing the vehicle.The front and rear tow hooks must only be used
for emergency situations on the road. THE vehi-
cle may be towed for short distances when a ded-
icated device is used in compliance with the Highway Code
(rigid bar), in order to move the vehicle on the road in
preparation for towing by a tow truck Tow hooks MUST
NOT be used to tow vehicles off the road or where there
are obstacles and/or for towing operations using cables
or other non-rigid devices. Respecting the above condi-
tions, towing must only take place with two vehicles (one
towing, the other towed) travelling as far as possible in
alignment along the same centreline.
Page 219 of 262

218CARE AND MAINTENANCE
IMPORTANT If the battery remains with the charge below 50%
for a long time it becomes damaged through sulphation and its
starting capacity is reduced.
The battery will also be more at risk of freezing (this can happen
as early as –10°C). Refer to the paragraph “Car inactivity” in chap-
ter “3” if the car is left parked for a long time.
If after having purchased your car you decide to add accessories re-
quiring permanent electrical power (alarm etc.) or accessories that
require large amounts of power, please consult an Alfa Romeo
Authorised Services. They can calculate the overall electrical re-
quirement.
The battery fluid is poisonous and corrosive. Avoid
contact with the skin and the eyes. Keep naked
flames and sources of sparks away from the bat-
tery: risk of explosion and fire.
Running the battery with an excessively low liquid
level will damage the battery beyond repair and
may even cause an explosion.
Incorrect assembly of electric and electronic devices
may cause severe damage to your car. Go to an Al-
fa Romeo Authorised Services if you want to in-
stall accessories after having purchased your car (alarms,
mobile phone, etc.): they will be able to suggest the most
suitable devices and advise you if a higher capacity bat-
tery needs to be installed.
Batteries contain substances that can be very dan-
gerous for the environment. Contact an Alfa Romeo
Authorised Services to replace the battery.
If the vehicle must remain unused for a long time
at very low temperatures, remove the battery and
take it to a warm place, to avoid freezing.
When performing any operation on the battery
or near it, always protect your eyes with the spe-
cial goggles.
Page 232 of 262

940A2000
955A8000 (*)
Otto
4 in line
72,0 x 84,0
1368
9,8
120 (*) 125
163 (*) 170
5500 (*) 5500
NORMAL DYNAMIC
230 250
23,4 25,5
2250 2500
NGK ZKR7A-10
Unleaded petrol
95 RON or 98 RON
(Specification EN228)
ENGINE
(*) For versions/markets, where provided
955A1000
Otto
4 in line
72.0 x 84.0
1368
10.8
58
78
5750
120
12.2
4000
NGK ZKR7A-10
Unleaded petrol
95 RON
(Specification EN228)955A6000
Otto
4 in line
72.0 x 84.0
1368
10.8
77
105
6500
130
13.2
4000
NGK DCPR7E-N-10
Unleaded petrol
95 RON
(Specification EN228)955A2000
Otto
4 in line
72.0 x 84.0
1368
9.8
99
135
5000
NORMAL DYNAMIC
180 206
18.3 21
1750 1750
NGK IKR9F8
Unleaded petrol
95 RON or 98 RON
(Specification EN228)
6
TECHNICAL DATA231
GENERAL1.4 Multi Air 1.4 Turbo 1.4 Turbo 1.4 Petrol
Multi Air 135HP Multi Air 170HP78HP (*)
Quadrifoglio Verde
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
Page 233 of 262

198A1000
Otto
4 in line
72.0 x 84.0
1368
9.8
110
150 (
Õ)
5500
NORMAL DYNAMIC
206 230
21 23.5
2250 3000
NGK IKR9F8
Unleaded petrol
95 RON or 98 RON
(Specification EN228
199A8000
Otto
4 in line
72.0 x 84.0
1368
9.8
114
155 (
❏)
5500
NORMAL DYNAMIC
201 230
20.5 23.5
5000 3000
NGK IKR9F8
Unleaded petrol
95 RON or 98 RON
(Specification EN228
232TECHNICAL DATA
(*) For versions/markets, where provided
(
Õ) The maximum power with 150HP is gotten using unloaded petrol 98 RON
(
❏) The maximum power with 155HP is gotten using unloaded petrol 98 RON
198A4000
Otto
4 in line
72.0 x 84.0
1368
9.8
88
120
5000
206
21
1750
NGK IKR9F8
Unleaded petrol
95 RON
(Specification EN228)198A4000
Otto
4 in line
72.0 x 84.0
1368
10.8
70
95
6000
126
12.9
4500
NGK ZKR7A-10
Unleaded petrol
95 RON
(Specification EN228)
GENERAL1.4 Petrol 1.4 Turbo 1.4 Turbo 1.4 Turbo
95HP (*) Petrol 120HP Petrol 150HP (*) Petrol 155HP
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
Page 234 of 262

TECHNICAL DATA233
6
955A3000
Diesel
4 in line
79.5 x 80.5
1598
16.5
88
120
3750
NORMAL DYNAMIC
280 320
28.5 32.6
1500 1750
–
Diesel fuel for
motor vehicles
(Specification EN590)
(*) For versions/markets, where provided
199B1000
Diesel
4 in line
69.6 x 82
1248
16.8
70
95
4000
NORMAL DYNAMIC
180 200
17.6 19.7
1500 1500
–
Diesel fuel for
motor vehicles
(Specification EN590)
955A4000
Diesel
4 in line
79.5 x 80.5
1598
16.5
85
115
4000
NORMAL DYNAMIC
260 300
26.5 30.6
1500 1500
–
Diesel fuel for
motor vehicles
(Specification EN590)
GENERAL 1.3 JTDM-21.6 JTDM1.6 JTDM
115HP (*) 120HP
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel