fuel Alfa Romeo 4C 2020 Owner handbook (in English)

VERY IMPORTANT
K


REFUELLINGOnly refuel with unleaded petrol with octane rating (RON) not less than 95, in compliance with the European specification EN228. In particular, the engine of
Alfa 4C has been designed to comply with all emission limits while simultaneously guaranteeing minimal consumption and maximum performance, using
premium-quality unleaded petrol with octane rating (RON) 98 or higher. The use of petrol that does not conform to the specification indicated may cause the
Uwarning light to switch on and the irregular operation of the engine.
STARTING THE ENGINEMake sure that the handbrake is engaged. Press the brake pedal and, without pressing the accelerator, turn the ignition key to AVV;
release it as soon as the engine has started.
PARKING ON FLAMMABLE MATERIALThe catalytic converter develops high temperatures during operation. Do not park the vehicle on grass, dry leaves,
pine needles or other flammable material: risk of fire.
ELECTRICAL ACCESSORIESIf, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), contact a Alfa Romeo Dealership.
They can calculate the overall electrical requirement and check that the vehicle’s electric system can support the required load.
SCHEDULED SERVICINGCorrect maintenance of the car is essential for ensuring it stays in tip-top condition and safeguards its safety features, its environmental friendliness
and low running costs for a long time to come.
IN THE OWNER HANDBOOK… you will find information, tips and important warnings regarding the safe, driving and looking after your car properly.
Pay particular attention to the symbols (personal safety) (environmental protection) (car safety).
PROTECTING THE ENVIRONMENTThe car is fitted with a system that carries out a continuous diagnosis of the emission related components in order to help
protect the environment.

9
THE KEYS
MECHANICAL KEY
Operation
The metal insert 1 fig. 1 operates:
❒ the ignition switch;
❒ the door locks.
KEY WITH REMOTE CONTROL(where provided)
Operation
The metal insert 1 fig. 2 operates:
❒ the ignition switch;
❒ the door locks.
Press button 2 to open/close the metal
insert.
1) 1)
1A0L0005
Door unlocking
Briefly press the Ëbutton:
to unlock doors and switch on ceiling
light for a fixed time; direction indicators
will flash twice (where provided).
The doors are unlocked automatically if
the fuel cut-off system intervenes.
If when locking the doors, one or more
doors are not closed correctly, the LED
flashes quickly together with the
direction indicators.
Door locking
Press button Ábriefly:
to unlock doors and switch off ceiling
light; direction indicators will flash once
(where provided).
2A0L0006
If one or more door are open, the doors
will not be locked. This is indicated by a
rapid flashing of the direction indicators
(where provided). The doors will be
locked if the tailgate is open however.
When the doors are locked from outside
the car (using the remote control), LED 1
fig. 3 will light up for a few seconds and
then start blinking (deterrent function).
When the doors are locked from inside
the car (by pressing the ≈button on
the dashboard) the LED will remain on
constantly.
3A0L0007

KNOWING THE INSTRUMENT PANEL TOOLS
30
CONTROL PANEL AND ON-BOARD INSTRUMENTS
DISPLAY WITH METRIC UNITS
1. Engine coolant gauge 2. Clock 3. Tachometer 4. Mode/gear engaged indicator 5. Gear Shift Indicator 6. External temperature
7. Fuel level gauge (the triangle on the right side of the symbol indicates the side of the car with the fuel filler)
8. Area dedicated to the display of the digital warning light related to the displayed message 9. Trip odometer 10. Speedometer
11. “Alfa DNA” system driving mode 12. Messages or information on display 13. Total odometer.
29A0L0118

31
DISPLAY WITH IMPERIAL UNITS
1. Engine coolant gauge 2. Clock 3. Tachometer 4. Mode/gear engaged indicator 5. Gear Shift Indicator 6. External temperature
7. Fuel level gauge (the triangle on the right side of the






symbol indicates the side of the car with the fuel filler)
8. Area dedicated to the display of the digital warning light related to the displayed message 9. Trip odometer 10. Speedometer
11. “Alfa DNA” system driving mode 12. Messages or information on display 13. Total odometer.
30A0L0129

KNOWING THE INSTRUMENT PANEL TOOLS
32
DISPLAY
The car is equipped with a display that,
according to the previously applied
settings, will show useful driving
information.
GEAR SHIFT INDICATOR
The GSI (Gear Shift Indicator) system
advises the driver to change gear
through a specific indication 5 fig. 29, 30
on the instrument panel.
Through the GSI, the driver is notified
that the gear change will allow a
reduction in fuel consumption.
Therefore, for driving oriented towards
reducing fuel consumption, it is advisable
to stick to “Natural” or “All Weather”
mode and to follow the suggestions of
the Gear Shift Indicator, where traffic
conditions permit.
When the () icon is displayed on the
instrument panel, the GSI suggests
switching to a higher gear, while when
the () icon is displayed, the GSI
suggests shifting to a lower gear.
IMPORTANT The GSI is not active when
the transmission is operating in AUTO
mode.
The indication in the instrument panel
remains on until the driver shifts gear or
the driving conditions go back to a
situation where gearshifting is not
required to improve consumption.
CONTROL BUTTONS fig. 31
: to scroll up through the displayed
screen and the related options or to
increase the displayed value.
SET/
N: press briefly to access the
menu and/or go to next screen or
confirm the selection. Hold down to go
back to the standard screen
: to scroll down through the displayed
menu and the related options or to
decrease the value displayed.IMPORTANT Buttons and activate
different functions according to the
following situations:
❒ within the menu, they allow you to
scroll up or down through the options;
❒ during setting operations, they
increase or decrease the displayed value;
❒ outside the menu they allow
to adjust the on board panel
brightness.
MAIN MENU
The menu comprises a series of options
which can be selected using the and 
buttons to access the different selection
and setting (Setup) operations indicated
below.
31A0L0125

37
Warning lights on panelMeaning What to do
In this case release the accelerator pedal to lower the
engine speed until the warning light stops flashing.
Continue the journey at moderate speed, trying to avoid
driving conditions that may cause further flashing and
contact a dedicated Alfa Romeo Dealership as soon as
possible.
If the Uwarning light flashes, it means that the catalytic
converter may be damaged.
3)
Under these conditions, the vehicle can continue travelling
at moderate speed without demanding excessive effort
from the engine. Prolonged use of the car with the warning
light on constantly may cause damage.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. INJECTION / EOBD SYSTEM FAILURE
In normal conditions, when the ignition key is turned to
MAR the Uwarning light switches on, but it should
switch off as soon as the engine is started.
The operation of the Uwarning light may be checked by
traffic police using appropriate equipment.
Comply with the laws and regulations of the country
where you are driving.
If the Uwarning light stays on or switches on when
driving, it means that the injection system is not working
properly; in particular, if the warning light comes on
constantly, this indicates a malfunction in the
supply/ignition system that could cause excessive
exhaust emissions, a possible loss of performance, poor
driveability and high fuel consumption.
On some versions the display shows the dedicated
message.
The Uwarning light switches off if the malfunction
disappears, but is still stored by the system.

KNOWING THE INSTRUMENT PANEL TOOLS
38
Warning lights on panelMeaningWhat to do
In any situation in which the message is “See manual”, it is
ESSENTIAL to refer to the contents of the “Wheels”
paragraph in the “Technical data” chapter, strictly
complying with the indications that you find there.
Low tyre pressure - See manual
The warning light switches on, together with a dedicated
message on the display, to indicate that the tyre pressure
is lower than the recommended value and/or that slow
pressure loss is occurring. In these circumstances, optimal
tyre duration and fuel consumption may not be
guaranteed.
Should two or more tyres be in the condition mentioned
above, the display will show the indications corresponding
to each tyre in sequence.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. TPMS system fault
The warning light switches on when a fault is detected in
the TPMS.
Should one or more wheels be fitted without sensors, the
display will show a warning message until initial conditions
are restored.IMPORTANT Do not continue driving with one or more flat
tyres as handling may be compromised. Stop the vehicle,
avoiding sharp braking and steering. Repair immediately
using the dedicated kit (see “Repairing a wheel” paragraph
in the “In an emergency” chapter) and contact the
dedicated Alfa Romeo Dealership as soon as possible. TPMS SYSTEM

KNOWING THE INSTRUMENT PANEL TOOLS
44
Warning lights on panelMeaningWhat to do
FUEL RESERVE / LIMITED RANGE
The digital warning light switches on in the display when
there is approximately 4 - 5 litres of fuel left in the tank.
FUEL RESERVE SENSOR / LIMITED RANGE FAULT
The digital warning light switches on in the display when a
fuel reserve sensor fault is detected.
The associated message appears on the display.
CRUISE CONTROL
(where provided)
The digital warning light comes on when the key is turned
to MAR, but should go out after a few seconds if the
Cruise Control function is off.
The warning light comes on when the Cruise Control wheel
is turned to the ON position (see the “Cruise Control”
paragraph in this chapter).
The associated message appears on the display.
MIRROR DEMISTING / DEFROSTING
The digital warning lights switches on in the display when
the button located on the control panel is pressed.
Contact a dedicated
Alfa Romeo Dealership as soon as possible.
24

KNOWING THE INSTRUMENT PANEL TOOLS
46
Warning lights on panelMeaningWhat to do
GENERIC FAILURE INDICATION
(where provided)
The symbol appears on the display together with the
events shown below.
Engine oil pressure sensor
The symbol appears when a failure is detected in the
engine oil pressure sensor. The display shows the
dedicated message.In this case, go to a dedicated
Alfa Romeo Dealership as soon as possible to have the
fault corrected.
Clutch overheating message
The
symbol, together with a message on the display,
lights up to indicate clutch overheating.
If you continue driving, the symbol
will disappear and
the warning light will come on (on some versions
together with a message on the display) to indicate a
gearbox fault.
If the symbol comes on together with a message on
the display, limit the gear shifting and/or change the
condition of use, until normal operating conditions are
restored.
If the warning light lights up (a message will appear on
the display, on some versions) stop immediately, operate
the handbrake, switch off the engine and wait 5 minutes:
after this, normal transmission operating conditions will
be restored.
Should the transmission failure condition persist, contact
the dedicated Alfa Romeo Dealership.
FUEL CUT-OFF SYSTEM
The symbol and the corresponding message are shown on
the display in the following cases:
❒ fuel cut-off system intervention:
the yellow symbol lights up;
❒ fuel cut-off system failure:
the red symbol lights up.For reactivating the fuel cut-off system, refer to the
description in the
“Fuel cut-off system” section in the “In an emergency”
chapter. If it is not possible to restore the fuel supply,
contact a dedicated Alfa Romeo Dealership.
s è

53
TPMS
(Tyre Pressure Monitoring
System)
(where provided)
DESCRIPTION
The tyre pressure monitoring system
(TPMS) warns the driver of low tyre
pressure on the basis of the cold
inflation pressure prescribed for the car.
Changes in outside temperature may
cause tyre pressure to vary.
This means that a decrease in the
outside temperature corresponds to a
decrease in the tyre pressure.
The tyre pressure must always be
adjusted according to the cold tyre
inflation pressure.
Cold tyre inflation pressure is the tyre
pressure after letting the car at a
standstill for at least three hours or a
travel shorter than 1.6 km after an
interval of three hours.
The cold tyre inflation pressure must not
exceed the maximum pressure indicated
on the tyre sidewall.Tyre pressure increases also while
driving: this is a normal condition and no
pressure adjustment is needed.
The TPMS continues to advise the driver
of the low tyre pressure condition until
this is corrected; the warning continues
until the pressure corresponds or
exceeds the pressure prescribed for the
cold tyres. When the low tyre pressure
warning light
nappears on the
instrument panel, the inflation pressure
must be adjusted up to the prescribed
cold inflation value.
The tyre pressure warning light switches
off after the system refreshes
automatically. You may need to drive the
car for about 20 minutes at a speed
higher than 20 km/h to allow the TPMS
to receive this information.
NOTE
❒ The TPMS does not replace the
normal tyre maintenance service and
does not indicate any fault in a tyre.
❒ The TPMS must not be used as a
pressure gauge while adjusting tyre
pressure❒ Driving with low tyre pressure causes
overheating and may cause a fault in the
tyres themselves. The low inflation
pressure reduces fuel efficiency and tyre
tread life and may also affect handling
and braking performance of the car.
❒ The TPMS does not replace the
correct tyre maintenance.
It is up to the driver to maintain the
correct tyre pressure level measuring it
with a suitable pressure switch. This is
necessary even if the decrease in the
inflation pressure value does not cause
the tyre pressure control warning light to
switch on.
❒ The TPMS warns the driver of any
condition of insufficient tyre pressure.
If this drops below the insufficient
pressure limit for any reason including
low temperature and normal pressure
loss of the tyre.
❒ The seasonal temperature changes
affect tyre pressure.