Table Alfa Romeo Giulietta 2014 Owner's Guide

TECHNICAL SPECIFICATIONS
Everything you may find useful for
understanding how your car is made
and works is contained in this chapter
and illustrated with data, tables and
graphics. For the enthusiasts and the
technician, but also just for those who
want to know every detail of their
car.IDENTIFICATION DATA....................224
ENGINE CODES - BODYWORK
VERSIONS ......................................22
ENGINE ..........................................227
FUEL SUPPLY .................................231
TRANSMISSION .............................232
BRAKES .........................................233
SUSPENSION .................................23
STEERING SYSTEM .......................235
WHEELS .........................................236
DIMENSIONS ..................................240
PERFORMANCE .............................241
WEIGHTS .......................................242
REFUELLING ..................................244
FLUIDS AND LUBRICANTS ............247
FUEL CONSUMPTION ....................25
CO2 EMISSIONS ............................252
PRESCRIPTIONS FOR HANDLING
THE VEHICLE AT THE END OF ITS
LIFE ................................................253
223
5
4
1

CORRECT READING OF
THE RIM CODE
Example fig. 198:
7Jx16H2ET417rim diameter in inches (1).Jprofile of the flange (side projection
where the tyre bead rests) (2).16
rim fitting diameter in inches
(corresponds to diameter of the tyre
to be mounted) (3 = Ø).
H2
shape and number of humps
(circumference measurement which
keeps the bead of Tubeless tyres
in position on the rim).
ET 41
wheel camber (distance between
the disc/rim support plane and
the wheel rim centre line).RIM PROTECTOR TYRES
158)
WARNING
158) DO NOT fit wheel caps when
using integral wheel caps fixed
(with springs) to the steel rim and
after-sale tyres provided with
Rim Protector (fig. 199). Use of
unsuitable tyres and wheel caps
may cause sudden loss of tyre
pressure.199
A0K0159
237

FUEL CONSUMPTIONThe fuel consumption figures given in the tables below are determined on the basis of the type-approval tests laid down by
specific European Directives.
The procedures below are followed for measuring consumption:
❒urban cycle: cold starting followed by driving that simulates urban use of the car;
❒extra-urban cycle: frequent accelerating in all gears, simulating extra-urban use of the car: speed varies between 0 and 120
km/h;
❒combined fuel consumption: calculated with a weighting of approximately 37% of the urban cycle and 63% of the extra-
urban cycle.
IMPORTANT The type of route, traffic conditions, weather conditions, driving style, general condition of the car, trim level/
equipment/accessories, use of the climate control, car load, presence of roof racks and other situations that adversely affect
the aerodynamics or wind resistance lead to different fuel consumption figures than those measured.
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)Versions Urban Extra-urban Combined1.4 Turbo Petrol8,3 5,3 6,4
1.4 Turbo MultiAir7,6 4,6 5,7
1750 Turbo Petrol10,8 5,8 7,6
1.6 JTD
M105 HP5,0 3,4 4,0
2.0 JTDM136/150 HP5,0 3,7 4,2
251

CO
2
EMISSIONS
The CO
2emission levels given in the following tables refer to combined consumption.
Versions CO
2emissions according to the current European directive (g/km)
1.4 Turbo Petrol148
1.4 Turbo MultiAir131
1750 Turbo Petrol177
1.6 JTD
M105 HP104
2.0 JTDM136/150 HP110
252
TECHNICAL SPECIFICATIONS

DASHBOARDThe presence and position of controls, instruments and gauges may vary according to different versions.
1. Adjustable air vent 2. Passenger front air bag 3. Control buttons 4. Windscreen wiper/rearscreen wiper/trip computer control lever 5. Instrument
panel 6. Exterior lighting control lever 7. Driver front air bag 8. Cruise Control (for versions/markets, where provided) 9. Uconnect Radio/Uconnect
Radio Nav (for versions/markets, where provided) 10. Heating/ventilation/climate control system controls 11. Glove compartment
1
A0K0730
255
RIGHT HAND DRIVE VERSIONS