clutch AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Workshop Manual

13-9


30 -
Coolant pump
With coolant regulatorRemoving and installing Page 19
-13
31 -
Belt pulley
For power steering pumpDesigned for ribbed beltInstall with bulged side facing in driving
direction
32 -
Belt pulley For power steering pumpDesigned for ribbed belt
33 -
Bolt 25 Nm (18 ft lb)
34 -
V-belt For coolant pumpRemoving and installing Page 13
-18
35 -
Viscous clutch
Removing and installing Page 13
-14
,
Fig. 1

Pa
ge 11 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

13-12


V-belt and ribbed belt, routing overview

1 -
Ribbed belt tensioner
2 -
Generator
3 -
Viscous clutch
4 -
Coolant pump
5 -
Power steering pump
6 -
V-belt
For coolant pumpRemoving and installing Page 13
-18
7 -
Ribbed belt
For generator, power steering pump and
viscous fan Removing and installing Page 13
-15
Pa
ge 14 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

13-20

Bearing for viscous fan in mounting
bracket, removing and installing


Lock carrier in service position Page 13
-1

Special tools and equipment

Hex nut from 3301 assembly tool
Extractor pipe from 3350 installation device
3367 press out tool for viscous clutch fan
bearing bushing

Removing

- Remove ribbed belt Page 13
-15
.

- Remove viscous fan (together with belt pulley)
Page 13
-14
, Fig. 1
.

- Remove circlip (arrow) from bearing bushing.
Pa
ge 22 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

13-29

Toothed belt, removing and installing


Removing

Engine installed
Lock carrier in service position Page 13
-1

Special tools and equipment
V159 pin wrench

- Remove ribbed belt and ribbed belt tensioner
Page 13
-15
.

- Remove viscous clutch (with belt pulley) Page
13
-14
, Fig. 1
.

- Remove upper toothed belt cover.

CAUTION!

Before removing toothed belt, note direction
of rotation with chalk or felt-tip marker.
Reversing the direction of rotation of a used
belt can destroy the belt.

- Turn crankshaft at central bolt of toothed belt gear in direction of
engine rotation to TDC Cyl.1 marking (arrows).
Pa
ge 32 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1