battery AUDI A3 1996 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual

17-24

Oil pressure switch, checking

- Disconnect line from oil pressure switch.

Note:
While starting engine, watch pressure tester and LED as oil pressure
switch may open during start. - Remove oil pressure switch and install VAG1342 oil pressure tester.
- Install oil pressure switch into VAG1342 oil pressure tester.
- Connect brown wire -1- of tester to Ground (GND).
- Using VAG1594 adapter, connect VAG1527B voltage tester to oil
pressure switch and Battery Positive Voltage (B+).
LED must not be lit.
- If LED is lit, replace oil pressure switch.
- Start engine.
At 1.2-1.6 bar (17.4-23.2 psi) LED must be lit.
- If LED does not light, replace oil pressure switch.
Pa
ge 30 of 33 Lubrication s
ystem com
ponents, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.17.1