engine AUDI A3 1996 8L / 1.G AEB ATW Engines Sealing Flanges And Flywheel Driveplate Workshop Manual
Page 4 of 11
13-39
Crankshaft oil seal (toothed belt side),
replacing
Engine installed
Lock carrier in service position Page 13
-1
Special tools and equipment
2085 seal puller
3083 arbor
3099 spur belt spreading
Removing
- Remove ribbed belt and ribbed belt tensioner
Page 13
-15
.
- Remove toothed belt Page 13
-29
.
- Remove mounting bracket for torque arm
Page 17
-2 , item - 5 -.
- Remove crankshaft toothed belt gear. Secure toothed belt gear using
3099 spur belt spreading.
Pa
ge 4 of 11 Sealin
g flan
ge and fl
ywheel/drive
plate, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.2
Page 10 of 11
13-44
Drive plate
Removing
Installing - Relocate 10-201 flywheel retainer to loosen and tighten bolts.
- Mark drive plate to engine.
- Install drive plate with shim -2- and mounting washer -1-. Lug (arrow)
must point toward torque converter.
- Insert at least three used mounting bolts and tighten.
Tightening torque: 30 Nm (22 ft lb)
Pa
ge 10 of 11 Sealin
g flan
ge and fl
ywheel/drive
plate, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.2