light AUDI A3 2006 8P / 2.G RNS_E Navigation System Manual

Navigation (NAV)157
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the function button
page 16 in the navi-
gation menu.
– Highlight Turn list with a check mark


page 151,
fig.163 to activate the function.
Th e n e x t th re e up c o mi n g t u rn s
page 156, fi g .1 6 9 a r e s h o wn in
the Turn list.
The immediate upcoming turn is shown in the bottom section of the
table.
If you pass a turn, it is deleted from the three-part table. The next
turn drops down into the list.
The following information is shown in the Turn list:


Recommended direction shown as an arrow, traffic circulars or
freeway entrances and exits, stopovers and destination


Names of streets, secondary roads and freeways you should be
driving on following the turn


Estimated distance to each recommended turn or to destination
The name underneath the three-line Turn list shows you the road
you are presently driving on.Tips
If you have activated the Turn list and freeway information page 157, you are shown the list of freeway information on free-
ways
fig.170 and the Turn list on other roads
page 156,
fig.169.
Highway info
When driving on freeways, additional information is
sh o w n , f o r e x a m p l e f o r p a r ki ng a re as , f re e w a y e x i t s o r
rest areas.Fig. 170 Setup Navigation: Map display with active freeway information– Press the function button
page 16 in the navi-
gation menu.
– Highlight Highway info w i t h a ch e ck m a r k


page 151,
fig.163 to activate the function.
Freeway information
fig.170 is shown for the route you are
traveling.
If you have activated freeway information, you are shown a list of
the next three items of freeway information.
SETUP
A1
A2
A;
SETUP
A2

Navigation (NAV)159
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the function button
page 16 in the navi-
gation menu.
– Highlight the Intersection map with a check mark



page 158, fig.171 to activate the function.
The map is divided into two parts at intersections. The right half of
the display continues to show you the map display you selected.
Th e l e ft h a l f o f t he d i s p l a y s h o w s y o u a p a ra l l e l e n l a r g e d v i e w o f t h e
intersection area
page 158, fig.172.
Next to the enlarged view, you are shown the changes in distance
until the turn-off point. At the same you are shown the name of the
street onto which you want to turn.
If you have activated the Auto intersection zoom function, the
Intersection map function cannot be activated.
If you would like to activate the Intersection map function, you first
have to deactivate the Auto intersection zoom function. These two
functions are mutually exclusive.
Tips
The map is oriented to driving direction
page 153 when switching
to zoom mode.
Auto intersection zoom
The map displays in zoom mode at intersections.Fig. 173 Setup Navigation: Auto intersection zoom activated– Press the function button
page 16 in the navi-
gation menu.
– Highlight the Auto intersection zoom with a check mark


fig.173 to activate the function.
For a detailed display, the map automatically zooms in at street
intersections, enhancing the view of the route from street to street.
If you have activated the Itersection map function, the Auto
intersection zoom function cannot be activated.
If you would like to activate the Auto intersection zoom function,
you first have to deactivate the Intersection map function. These
two functions are mutually exclusive.
SETUP
SETUP

Navigation (NAV) 160CompassFig. 174 Setup Navigation: Compass activated
– Press the function button
page 16 in the navi-
gation menu.
– Highlight Compass with a check mark


fig.174 to
activate the function.
If route guidance is not active, the vehicle orientation (compass
direction) is shown in the instrument cluster display
fig.175. If
the system recognizes the road, the road on which you are presently
driving is also shown.
Version information– Press the function button
page 16 in the navi-
gation menu.
– Select Version information
fig.174.The software version for the Navigation DVD in use is shown.
Tips
You can obtain information on updates for the Navigation DVD at an
Audi dealership.
Fig. 175 Instrument
cluster display
Example of a compass
display
SETUPSETUP

Navigation (NAV)161
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Demo modeFig. 176 Setup Navigation: Activate demo mode– Press the function button
page 16 in the navi-
gation menu.
– Highlight Demo mode with a check mark


fig.176 to
activate the function.
The Demo mode provides a simulation of the route you entered. This
allows you to effectively plan and display your destination by
showing specific map content
page 155 or route criteria
page 141.
Map type “Position 3D”
page 154 is not shown in Demo mode. If
you have selected map type “Position 3D”, the simulation is shown
in map type “current position”.
Set position/directionFig. 177 Setup Navigation: Input position/direction manually
Fig. 178 Setup Navigation: Set direction of position
SETUP

SETUP 174
– Press the button or

button
page 12 to
switch the display on again.
Brightness
You can set display brightness manually.Fig. 186 Setup: Adjusting the brightness of the display–Press the Display control button in the Setup menu.
– Select Brightness
page 173, fig.185.
– Rotate the control knob to change the brightness of the
display.Th e b r i g h t n e s s o f t h e d i s p l a y a d j u s t s a u t o m a t i c a l l y t o a m b i e n t l i g h t .
In addition, the brightness of the display can be regulated with the general adjustment for instrument lighting and with the Brightness
function in the Navigation System.
Tips
You can find more information about adjusting the instrument
lighting in your Owner's Manual.
RETURN