cruise control AUDI A4 1995 B5 / 1.G APB Engine Additional Signals Checking Workshop Manual

24-191

Clutch Vacuum Vent Valve Switch -F36,
checking


Note:
This signal is used to avoid RPM over-oscillation
and load change impacts when changing gears
and is also used for the cruise control system.

Test sequence

- Connect vehicle diagnostic, testing and
information system VAS 5051 or VAG1551 scan
tool and select engine electronics control
module by entering address word "01" Page
01
-9 .
When doing this the ignition must be switched
on. Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select function "Read Measuring Value
Block" and confirm entry with -Q- button.
Read Measurin
g Value Block
Input displa
y group number XXX

Indicated on display
- Press buttons -0-, -6- and -6- to select "display group number 066" and
confirm entry with -Q- button.
Read Measuring Value Block 66

Indicated on display
Pa
ge 15 of 37 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.6