AUDI A4 1995 B5 / 1.G Rear Bumper Avant Workshop Manual

63-16


Rear bumper (Avant) Rear bumper, removing, installing and
assembly overview ( VIN 8D XA 200 000)

1 -
Metal bolt
2 -
Bracket
- To remove, remove metal bolts -1- and
take off bracket.
3 -
Clip
4 -
Spoiler
Removing and installing page 63
-10Pa
ge 1 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-17


Repair Manual, Body
-Interior, Repair Group 70

Repair Manual, Body
-Interior, Repair Group 70
5 -
Bumper
- Before removing, remove rear panel trim.
- Remove tailgate seal in area of loading
edge/side panels.
- Fold luggage compartment cover
forward.
- Remove tie-downs left and right at side
trim and unclip rear side trim. - Carefully pull side trim at left and right
towards vehicle interior.
- Remove combination bolts -9-.
- Unclip bumper from bracket -2- in
direction of arrow and pull off towards
rear.
6 -
Bracket
Removing from bumper page 63
-19
7 -
Cover strip
Removing page 63
-19
Pa
ge 2 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-18


8 -
Support
- To remove, heat body with heat gun to
approx. 40 C (104 F) and pull off
support.
- To attach, heat body in adhesion area
with hot air injector to approx. 40 C
(104 F).
Adhesion surface must be free of dust and
grease
- Pull off protective foil and press on
support using special tool 3356
(application roller).
9 -
Combination bolt 23 Nm (17 ft lb)
10 -
Console
Pa
ge 3 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-19

Bumper cover strip, removing


- Remove bumper page 63
-1 .

Removing bracket from bumper - Release locking mechanism and unclip cover strip -3- from bumper -2-.

- Remove bolts (arrows) and take bracket -1- out of bumper -2-.
Tightening torque: 23 Nm (17 ft lb)
Pa
ge 4 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-20


Rear bumper, removing and installing (VIN
8D XA 200 001 )

Repair Manual, Body-Exterior, Repair Group 70,
trim pieces.
Repair Manual, Body-Exterior, Repair Group 70,
trim pieces.
1 -
Bumper
Before removing, remove rear panel trim.Remove rear lid seal around loading edge
and sides. Fold luggage compartment cover forward.Remove tie-downs left and right at side trim
and unclip rear side trim. Carefully pull side trim at left and right
toward vehicle interior. Remove screw w/washer assembly -6-.Unclip bumper from bracket -4- and
remove toward rear.
Pa
ge 5 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-21


2 -
Spoiler
Removing and installing page 63
-10
.
3 -
Clip
4 -
Bracket
To remove, remove metal bolts -5- and
remove bracket -2-.
5 -
Metal bolt
6 -
Screw w/washer assembly 23 Nm
7 -
Bracket Removing from bumper page 63
-22
.
8 -
Cover strip
Removing page 63
-22
.
Pa
ge 6 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-22

Bumper cover strip, removing


- Remove rear bumper page 63-20
.

- Release locking mechanism and unclip cover strip -3- from bumper -2-.
- for removing impact absorber.

Fig. 1 Removing bracket from bumper
- Remove bolts (arrows) and take bracket -1- out of bumper -2-.
- Installation tightening torque 23 Nm.
Pa
ge 7 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4

63-23


Bracket for rear bumper, removing and
installing

1 -
Bracket for rear bumper
The bracket has two parts. The front half
can be shifted to adjust the length.
2 -
Combination bolts 1.5 Nm.Tighten bolts in sequence -a-, -b-, -c- then -
d-.
3 -
Metal bolt 1.5 Nm.
4 -
Wheelhousing liner, rear
5 -
Rear bumper Removing and installing page 63
-20
.
Pa
ge 8 of 8 Rear bum
per
(Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.63.4