ABS AUDI A4 1996 B5 / 1.G Airbag Service Workshop Manual
Page 2 of 75
packaging.
If installation work is interrupted,
immediately return the airbag unit to its
original packaging.
NEVER leave an airbag unit unattended.
After removing from the vehicle, ALWAYS lay
the airbag down with impact absorbing pad
(padded side) facing up.
Never attempt to open or service airbag
components. Always use new parts.
Pa
ge 2 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3
Page 53 of 75
69-83
Seat occupant sensor, removing and
installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
Note:
The seat occupant sensor will be used at a later
time.
Note:
Sensor mat is only available as a replacement part which includes seat
heater and seat cushion. - Removing seat page 72
-2 .
- Remove seat cover page 74
-15
.
- Press retaining tabs -3- and disconnect connector -1- for seat occupant
sensor from connector strip -4-.
- Disconnect Ground (GND) strap from harness connector -1- (location -
4-).
- Unclip harness connector -5- and disconnect intermediate connector to
backrest.
- Remove seat cushion along with sensor mat and seat heater from seat
pan.
Pa
ge 53 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3