coolant level AUDI A4 1996 B5 / 1.G AWM Engine Cooling System Components Workshop Manual
Page 14 of 38
19-11
- Start engine and maintain an engine speed of
about 2000 rpm for approx. 3 minutes.
- Allow engine to run at idling speed until lower
hose on radiator becomes hot.
WARNING!
Hot steam can escape when opening the cap
on the expansion tank: Cover cap with a cloth
and open carefully.
- Check coolant level and top up if necessary. If
engine is warm, coolant level must be at max.
mark; if cold, between min. and max. marks.
- Stop engine.
Pa
ge 14 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
Page 26 of 38
19-23
Lower coolant line, removing and
installing
Special tools and equipment
Removing
VAG 1921
- Drain coolant Page 19
-4 .
- Disconnect coolant hoses -1- and -3-.
- Unbolt coolant expansion tank -2- (-arrows-).
- Disconnect electrical wiring to coolant level display switch -F66- on
underside of expansion tank.
Pa
ge 26 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1
Page 34 of 38
19-31
Installing
Installation is carried out in the reverse order of
removal; note the following:
- Install front bumper:
Repair Manual, Body Exterior, Repair Group
63
- Top up coolant Page 19
-7 .
Vehicles with automatic transmission:
- Attach ATF lines.
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37
- Check ATF level:
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37
Tightening torques
Pa
ge 34 of 38 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.19.1