AUDI A4 1997 B5 / 1.G 01A Transmission Rear Final Drive Assembly Workshop Manual
Page 1 of 3
39-111
Rear final drive, disassembling
and assembling Assembly overview
Notes:
Separating drive flange housing from final drive
with the final drive installed Page 39
-85
Separating drive flange housing from final drive
with the final drive removed Page 39
-113
1 -
Final drive housing
2 -
Sleeve
3 -
Transmission support
4 -
Drive flange
Removing Page 39
-93
5 -
Drive flange housing
Removing and installing Page 39
-85
6 -
Pinion shaft
Is matched with ring gear, always replace
together as a set. Removing and installing Page 39
-134Pa
ge 1 of 3 Rear final drive, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.13
Page 2 of 3
39-112
7 -
Final drive cover
8 -
Differential
Must be removed before removing pinion
shaft Removing and installing Page 39
-114
Disassembling and assembling Page 39
-121
Pa
ge 2 of 3 Rear final drive, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.13
Page 3 of 3
39-113
Drive flange housing, removing from
final drive housing
Final drive removed.
Special tools and equipment
VW771 slide hammer-complete set with 771/15
threaded piece
VW1306 drip tray
Removing
- Mount final drive on repair stand Page 39
-
110
.
- Place VAG1306 drip tray under final drive and
drain gear oil.
- Remove bolts from drive flange housing to final
drive housing.
- Remove drive flange housing by pulling on drive flange, and support
drive flange housing.
Pa
ge 3 of 3 Rear final drive, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.13