oil pressure AUDI A4 1997 B5 / 1.G AWM Engine Pistons And Connecting Rods Workshop Manual

13-79


Pistons and connecting rods,
disassembling and assembling Note:
Oil spray jet and pressure relief valve Fig. 6
,
Page 13
-85

1 -
Conrod bolt - 30 Nm +
1/4 turn (90 )
further
Always replaceOil threads and contact surfaceTo measure radial clearance use old boltTo measure radial clearance tighten to 30
Nm but not further
Pa
ge 1 of 8 Pistons and connectin
g rods, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.4

13-85


Fig. 5 Location of bearing shell
- Install bearing shells centrally into connecting rod or into connecting
rod bearing cap.

Distance a = 3.0 mm

Fig. 6 Oil spray jet and pressure relief valve
1 - Oil spray jet (for piston cooling)
2 - Bolt with pressure relief valve - 27 Nm

Opening pressure 1.3 to 1.6 bar
Pa
ge 7 of 8 Pistons and connectin
g rods, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.4