air suspension AUDI A4 1998 B5 / 1.G 01A Transmission Remove And Install Workshop Manual
Page 7 of 21
34-23
All models
Note:
Take care not to damage protective coating on drive axles. - Remove engine speed (RPM) sensor -G28- on left of transmission
(arrow) and move clear to side.
- Disconnect drive axles from flange shafts and rest them on suspension
links.
- Disconnect harness connector off Vehicle Speed Sensor -VSS- (arrow -
A-).
- Disconnect back-up light connector (multi-function sensor) (arrow -B-).
- Disconnect all other electrical connections and ground wires from
transmission and from engine/transmission mounting bolts.
Pa
ge 7 of 21 Transmission, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.2