light AUDI A4 1998 B5 / 1.G 01W Transmission Clutch Release Workshop Manual
Page 10 of 13
30-24
3 -
Clutch plate
Installation position: Spring pack (coil
springs) facing pressure plate. Clutch lining
must make full contact with flywheel.
Marking "Getriebeseite" (if provided) faces
pressure plate Do not lubricateClutch plate diameter Page 00
-3
Centering Fig. 1Lightly lubricate splines
4 -
Pressure plate Removing and installing Fig. 1Checking ends of diaphragm spring Fig. 2 Checking spring connection and rivets
Fig. 3
5 -
Bolt
25 Nm (18 ft lb)Loosen and tighten in stages and in
diagonal sequence
Pa
ge 10 of 13 Clutch release mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.30.2