torque AUDI A4 1998 B5 / 1.G ATW Engine Motronic Fuel Injection Syst

24-30

Basic Settin
g
Q
Enter display group number XXX

When indicated on display
- Press buttons -0-, -5- and -6- to select "display group number 056" and
press -Q- button to confirm input.
System in basic setting 56
1
2
3
4

When indicated on display
- Check whether the engine speed in display field 1 (actual engine speed) is
within tolerated range.

Display fields

1 2 3 4
Display group 056: Idle stabilization at operating temperature
Display
xxx /min
xxx /min x.x % X X X X X
Indicated
Engine speed (actual)
Engine speed
(specified) Idle control
Torque
change Operating conditions
Specified
value FWD: 740 to 860 RPM
AWD: 800 to 920 RPM FWD: 800 RPM
AWD: 860 RPM x.x % 0 0 0 0 0
Note
If specified value is not obtained
Page 24
-32

Significance of numbers
Page 24
-32
Pa
ge 33 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1

24-48

Make sure fuel injectors are in place and
seated correctly
Check clip for unobstructed fitting.
Place fuel rail with secured fuel injectors
onto intake manifold, and apply uniform
pressure to press it in.

Tightening torque

Component

Nm
Fuel distributor at intake manifold 10
Pa
ge 53 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1