timing belt AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual
Page 9 of 20
13-55
- Replace central bolt for toothed belt sprocket.
Note:
Tightening torque 1) Replace bolt 2) 90 corresponds to a quarter turn - Remove crankshaft toothed belt sprocket. To do this, counter-hold
toothed belt sprocket with 3415. Contact surface between sprocket and crankshaft must be free of oil.Do not oil bolt for crankshaft sprocket.
- Install toothed belt (adjust valve timing) Page 13
-44
.
- Install ribbed belt and tensioner for ribbed belt Page 13
-20
.
- Install lock carrier Page 13
-1 .
Component
Nm
Toothed belt sprocket to crankshaft
90 + 90
1)2)
Pa
ge 9 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2
Page 15 of 20
13-61
- Install crankshaft oil seal Page 13
-54
.
- Install toothed belt (adjust valve timing) Page
13
-44
.
- Install bracket for A/C compressor -Item 5 -,
Page 13
-15
.
- Install lock carrier Page 13
-1 .
Tightening torques
Component
Nm
Sealing flange to cylinder block 15
Bracket for air conditioner compressor on
cylinder block
33
A/C compressor to bracket 25
Pa
ge 15 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2