lock AUDI A4 1998 B5 / 1.G Climate Control Components In Passenger Compartment Workshop Manual
Page 7 of 34
87-124
Notes: - Push back connector locks and unplug electrical connectors.
- Install in reverse order of removal.
After installing E87, check that shaped hose -C- of temperature sensor
G56 (blower V42) is routed correctly (not kinked). When installing screws -B-, position the center trim mounts correctly.After installing E87, always confirm correct coding, perform basic
setting and check DTC memory.
Pa
ge 7 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21
Page 14 of 34
87-130
Fresh air blower -V2-, removing and
installing (1997 )
Remove glovebox
Repair Manual, Body Interior, Repair Group
70
Separating fresh air blower -V2- and mounting plate - Remove electrical connector -B-
- Remove bolts -A- and remove fresh air blower with mounting plate from
heater/air conditioner assembly.
- Depress locking tabs -A- and -B- with screwdriver.
- Separate fresh air blower from mounting plate.
- Disconnect electrical harness connectors -C-.
Pa
ge 14 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21