torque AUDI A4 1998 B5 / 1.G Seatbelts Workshop Manual

69-12

Belt buckle attachment point


- Remove seat page 72
-2 .
1 - Buckle
4 - Spring washer
- Remove bolt -3-.
Tightening torque: 60 Nm (44 ft lb)
- If necessary, disconnect harness connector -2- for belt warning.
Pa
ge 16 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1

69-13

Outer floor assembly attachment point


Mounting bracket -2- must be located in impression -3- of floor assembly. - Remove bolt -1-.
Tightening torque: 50 Nm (37 ft lb)
Pa
ge 17 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1

69-14

Recaro seat buckle, removing and
installing


- Remove seat page 72
-25
.

- Turn buckle -1- downward to allow access to bolt -2-.
- Remove bolt -2-.
Tightening torque: 60 Nm (44 ft lb)
Pa
ge 18 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1

69-20

Rear belt adjuster, removing and
installing


Removing

Note:
It is not necessary to remove the rear shelf when
removing the rear belt adjuster.

- Undo lower attachment point of rear three-point seat belt.
Tightening torque: 50 Nm (37 ft lb)
- Unclip belt guide trim -3-.
- Detach belt adjuster cover -2- at left and right of retaining tab -7-.
- Swing belt adjuster -4- with belt webbing upward.

- Use screwdriver to press retaining tab -1- (2x) inward while
simultaneously pulling up on belt adjuster -2-.
- Pull belt webbing through belt adjuster -2-.
Pa
ge 26 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1