length AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual
Page 10 of 15
42-100
2 -
Gasket
Always replace; remove protective backing
and stick onto joint
3 -
Inner CV joint O.D.: 100 mm (3.9 in.)Replace only as complete jointRemoving Fig. 3Pressing on Fig. 4Greasing Note, page 42
-99
4 -
Dished washer
Installation position Fig. 7
5 -
Inner CV joint boot with cap
Examine for splits and signs of chafingUse drift to removeCoat sealing surface of CV joint with D-3
before attaching to CV joint
6 -
Axle shaft Identical length on left and right-sides
7 -
Outer CV joint boot Examine for splits and signs of chafingVentilate before tightening clamp Fig. 2
Pa
ge 10 of 15 Rear drive axle, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.7