AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1168/w960_1168-0.png AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual

Page 1 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-93
 
  
Rear drive axle, removing and 
installing CAUTION! 
Do not attempt to move a vehicle from which 
the drive axle has been removed. Otherwise 
wheel bearing damage will result. If the vehicle

Page 2 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-94
 
  
WARNING! 
The vehicle must be standing on its wheels 
when loosening or tightening. Otherwise the 
risk of an accident exists.  7 - 
Collar bolt 
Always replaceSwitching from or mixing old

Page 3 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-95
      
Removing and installing drive axle (left-hand 
side)  
     
Vehicle must be standing on its wheels 
above vehicle lift 
     
-  Remove wheel trim.
     
   On light alloy wheels use pul

Page 4 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual      
-  Remove collar bolt.
     
-  Remove bolts from inner CV joint to rear final 
drive. 
Pa
ge 4 of 15 Rear drive axle, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Di

Page 5 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-96
 
    
-  Remove nut and bolt for connecting link to wheel bearing housing 
(arrow -2-)   page 42
-43
 . 
   Tightening torque: 50 Nm (37 ft lb)
    
Repair Manual, Engine Mechanical, Repair Gro

Page 6 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-97
      
Removing and installing drive axle (right-
hand side)  
     
Vehicle must be standing on its wheels 
above vehicle lift 
     
-  Remove wheel trim.
     
   On light alloy wheels use pu

Page 7 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual      
-  Remove collar bolt.
     
-  Remove bolts from inner CV joint to rear final 
drive. 
Pa
ge 7 of 15 Rear drive axle, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Di

Page 8 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-98
 
    
-  Remove nut and bolt for connecting link to wheel bearing housing 
(arrow -2-)   page 42
-43
 . 
   Tightening torque: 50 Nm (37 ft lb)
    
Installation is the reverse of removal.  
CA

Page 9 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-99
 
  
Rear drive axle, servicing
 
Note:  
Constant Velocity (CV) joints are packed with 
grease G-6. 
Note:  
Re-grease the joint, if necessary, when replacing 
the CV joint boot. 
Outer 
joint

Page 10 of 15

AUDI A4 1998 B5 / 1.G Suspension Rear Drive Axle Remove And Install Workshop Manual 42-100
 
  
2 - 
Gasket 
Always replace; remove protective backing 
and stick onto joint 
3 - 
Inner CV joint O.D.: 100 mm (3.9 in.)Replace only as complete jointRemoving  Fig. 3Pressing on   Fig. 4Gr
Page:   1-10 11-20 next >