AUDI A4 1998 B5 / 1.G Suspension Rear Struts And Upper Control Arm User Guide

42-75

- Install suspension strut mounting bracket.

Note:
Nut faces in direction of travel! - Install securing bolt into suspension strut mounting bracket and screw
on nut (arrow) loosely.
- Install locating bolt -A- into suspension strut mounting bracket and
secure loosely with nut.

Note:
Illustration shows the position of the degree scale when assembling the
right-hand suspension strut. - Turn suspension strut mounting bracket until pointer on degree scale
(on VAG1752 suspension strut tensioner) is pointing to 21 2 (with
locking bolt -D- loose) and ... L - left-hand suspension strut
R - right-hand suspension strut
Pa
ge 11 of 12 Sus
pension strut and u
pp
er control arm, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.4

42-76


- ... move lever arm -C- with locating bolt -A- perpendicular to height
adjuster -B-.
- Tighten locking bolt -D-.
- Relieve tension from compressed coil spring and remove VAG1752/1
spring compressor.
- Remove locating bolt -A- from suspension strut mounting bracket.

Note:
Illustration shows right-hand suspension strut. - Tighten nut (arrow).

Tightening torque: 70 Nm (52 ft lb) + 1/4-turn (90 )- Remove suspension strut from VAG1752 suspension strut tensioner.
Pa
ge 12 of 12 Sus
pension strut and u
pp
er control arm, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.4