service AUDI A4 1998 B5 / 1.G Suspension Rear Struts And Upper Control Arm Workshop Manual
Page 3 of 12
42-67
Installing
- Install in reverse order of removal.
CAUTION!
Bonded rubber bushings can only be turned
to a limited extent. The bolted connection
between the wheel bearing housing to upper
control arm and the connection between the
shock absorber to lower control arm must
only be tightened when the vehicle is
standing on the ground. Otherwise the
bonded rubber bushings will be subjected to
a torsional stress resulting in shortened
service life
Pa
ge 3 of 12 Sus
pension strut and u
pp
er control arm, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.4